View LA3386-MQ_149722.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Hyper 3 mm (T1) LED, Diffused Hyper-Bright, Wide-Angle LED LS 3386, LA 3386, LO 3386, LY 3386
Besondere Merkmale * Gehausetyp: eingefarbtes, diffuses 3 mm (T1) Gehause * Besonderheit des Bauteils: Lotspiee mit Aufsetzebene * Wellenlange: 632 nm (super-rot), 615 nm (amber), 605 nm (orange), 587 nm (gelb) * Abstrahlwinkel: 100 * Technologie: InGaAlP * optischer Wirkungsgrad: 11 lm/W (gelb, orange, amber), 7 lm/W (super-rot) * Gruppierungsparameter: Lichtstarke * Lotmethode: Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Verpackung: Schuttgut, gegurtet lieferbar Anwendungen * optischer Indikator * Hinterleuchtung (Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) * Innenbeleuchtung im Automobilbereich (z.B. Tastenbeleuchtung, u.a.) * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Signal- und Symbolleuchten
Features * package: colored, diffused 3 mm (T1) package * feature of the device: solder leads with stand-off * wavelength: 632 nm (super-red), 615 (amber), 605 nm (orange), 587 nm (yellow) * viewing angle: 100 * technology: InGaAlP * optical efficiency: 11 lm/W (yellow, orange, amber), 7 lm/W (super-red) * grouping parameter: luminous intensity * soldering methods: TTW soldering * preconditioning: acc. to JEDEC Level 2 * packing: bulk, available taped on reel
Applications * coupling into light guides * backlighting (keys, displays, illuminated advertising, general lighting) * interior automotive lighting (e.g. key backlighting, etc.) * marker lights (e.g. steps, exit ways, etc.) * signal and symbol luminaire
2001-02-13
1
LS 3386, LA 3386, LO 3386, LY 3386
Typ Type Emissionsfarbe Color of Emission Gehausefarbe Color of Package Lichtstarke Luminous Intensity IF = 20 mA IV (mcd) 11.2 ... 71.0 18.0 ... 28.0 28.0 ... 45.0 45.0 ... 71.0 18.0 ...112.0 18.0 ...112.0 28.0 ... 45.0 45.0 ... 71.0 71.0 ...112.0 28.0 ...180.0 18.0 ...112.0 28.0 ... 45.0 45.0 ... 71.0 71.0 ...112.0 28.0 ...180.0 18.0 ...112.0 28.0 ... 45.0 45.0 ... 71.0 71.0 ...112.0 28.0 ...180.0 Lichtstrom Luminous Flux IF = 20 mA V (mlm) 360 (typ.) 190 (typ.) 300 (typ.) 480 (typ.) 560 (typ.) 530 (typ.) 280 (typ.) 450 (typ.) 700 (typ.) 840 (typ.) 530 (typ.) 280 (typ.) 450 (typ.) 700 (typ.) 840 (typ.) 530 (typ.) 280 (typ.) 450 (typ.) 700 (typ.) 840 (typ.) Bestellnummer Ordering Code
LS 3386-LP LS 3386-M LS 3386-N LS 3386-P LS 3386-MQ LA 3386-MQ LA 3386-N LA 3386-P LA 3386-Q LA 3386-NR LO 3386-MQ LO 3386-N LO 3386-P LO 3386-Q LO 3386-NR LY 3386-MQ LY 3386-N LY 3386-P LY 3386-Q LY 3386-NR
super-red
red diffused
Q62703-Q3579 Q62703-Q3581 Q62703-Q3582 Q62703-Q3709 Q62703-Q3580 Q62703-Q3886 Q62703-Q3887 Q62703-Q3888 Q62703-Q3889 Q62703-Q3890 Q62703-Q3891 Q62703-Q3892 Q62703-Q3893 Q62703-Q3894 Q62703-Q3895 Q62703-Q3896 Q62703-Q3897 Q62703-Q3898 Q62703-Q3899 Q62703-Q3900
amber
orange diffused
orange
orange diffused
yellow
yellow diffused
Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11 % ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of 11 %. Anm.: Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe oder mindestens zwei Einzelgruppen. In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe enthalten. Die technologiebedingte Helligkeits-Streuung der heutigen LED-Herstellprozesse uber einen langeren Fertigungszeitraum (Halbleitermaterial - Chipherstellung - Montageprozesss) erlaubt keine Zusage einer einzelnen Helligkeitsgruppe. Daher mussen mindestens zwei Helligkeitsgruppen vorgesehen werden! Note: The standard shipping format for serial types includes a lower or upper family group or at least two individual groups. No packing unit / tape ever contains more than one luminous intensity group. Luminosity variations caused by the technology used in current LED manufacturing processes over a protracted manufacturing period (semiconductor material - chip fabrication - assembly process) mean that it is not possible to assign LEDs to a single luminous intensity group. For this reason at least two luminous intensity groups must be provided!
2001-02-13
2
LS 3386, LA 3386, LO 3386, LY 3386
Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current Stostrom Surge current t 10 s, D = 0.005 Sperrspannung Reverse voltage Leistungsaufnahme Power consumption TA 25 C Symbol Symbol Werte Values LS, LO, LA LY - 55 ... + 100 - 55 ... + 100 + 100 30 1 0.2 Einheit Unit C C C mA A
Top Tstg Tj IF IFM
VR Ptot
3 80
V mW
Warmewiderstand Thermal resistance Rth JA Sperrschicht/Umgebung Junction/ambient Rth JS Sperrschicht/Lotpad Junction/solder point Montage auf PC-Board FR 4 (Padgroe 16 mm 2) mounted on PC board FR 4 (pad size 16 mm 2) Minimale Beinchenlange Minimum lead length
500 280
K/W K/W
2001-02-13
3
LS 3386, LA 3386, LO 3386, LY 3386
Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 20 mA Dominantwellenlange Dominant wavelength IF = 20 mA Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV Durchlassspannung 1) Forward voltage 1) IF = 20 mA Sperrstrom Reverse current VR = 3 V Temperaturkoeffizient von peak Temperature coefficient of peak IF = 20 mA; -10C T 100C Temperaturkoeffizient von dom Temperature coefficient of dom IF = 20 mA; -10C T 100C Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; -10C T 100C Optischer Wirkungsgrad Optical efficiency IF = 20 mA
1)
Symbol Symbol LS (typ.)
Werte Values LA 622 LO 610 LY 591 645
Einheit Unit nm
peak dom
(typ.)
632
615
605
587
nm
(typ.)
16
16
16
15
nm
(typ.) (typ.) (max.) (typ.) (max.) (typ.)
2
100 2.0 2.4
100 2.0 2.4
100 2.0 2.4
100 2.0 2.4
Grad deg. V V
VF VF IR IR TCpeak
0.01 0.01 0.01 0.01 A A 10 10 10 10 0.14 0.13 0.13 0.13 nm/K
(typ.)
TCdom
0.01 0.06 0.07 0.10 nm/K
(typ.)
TCV
- 2.0 - 1.8 - 1.7 - 2.5 mV/K
(typ.)
opt
7
11
11
11
lm/W
Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0.1 V ermittelt. Voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V.
2001-02-13
4
LS 3386, LA 3386, LO 3386, LY 3386
Relative spektrale Emission Irel = f (), TA = 25 C, IF = 20 mA Relative Spectral Emission V() = spektrale Augenempfindlichkeit Standard eye response curve
100
OHL00235
Irel
% 80
V
60 yellow orange amber super-red
40
20
0 400
450
500
550
600
650
nm
700
Abstrahlcharakteristik Irel = f () Radiation Characteristic
40 30 20 10 0 1.0
OHL01681
50
0.8
0.6 60 0.4 70 0.2 80 90 100 1.0
2001-02-13
0
0.8
0.6
0.4
0
5
20
40
60
80
100
120
LS 3386, LA 3386, LO 3386, LY 3386
Durchlassstrom IF = f (VF) Forward Current TA = 25 C
10 2 mA 5
OHL00232
Relative Lichtstarke IV/IV(20 mA) = f (IF) Relative Luminous Intensity TA = 25 C
10 1
OHL00233
IV I V (20 mA)
10 0
IF
10 1 5
5
10 -1 5
10 0 5
10 -2 5
super-red yellow orange/amber
10 -1
1
1.4
1.8
2.2
2.6
3 V 3.4
10 -3 -1 10
5 10 0
5 10 1
mA 10 2
VF
Maximal zulassiger Durchlassstrom IF = f (T) Max. Permissible Forward Current
35
OHL01013
IF
Relative Lichtstarke IV/IV(25 C) = f (TA) Relative Luminous Intensity IF = 20 mA
IV 2.0 IV (25 C)
OHL00238
I F mA
30
TA
25 20 15 10
TS
1.6
1.2
orange yellow amber super-red
0.8 orange yellow amber super-red
0.4
5 0
TA temp. ambient TS temp. solder point
0 20 40 60 80 C 100
0 -20
0
20
40
60
C 100
T
2001-02-13 6
TA
LS 3386, LA 3386, LO 3386, LY 3386
Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C LS, LA, LO
100 A 5
OHL00318
Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C LY
100 A 5
OHL00316
IF
IF
D=
0.005 0.01 0.02 0.05 0.1 0.2 0.5
D = TP
t
tP
IF T D=
0.005 0.01 0.02 0.05 0.1 0.2 0.5
10-1 5
10-1 5
D= T
tP
tP
IF T
10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2
10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2
tp
tp
Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C LS, LA, LO
100 A 5
OHL01414
Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C LY
IF
100 A 5
OHL01415
IF
D = TP
t
tP
IF T
D= T
tP
tP
IF T
D=
10
-1
5
0.005 0.01 0.02 0.05 0.1 0.2 0.5
10-1 5
D=
0.005 0.01 0.02 0.05 0.1 0.2 0.5
10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2
10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2
tp
2001-02-13 7
tp
LS 3386, LA 3386, LO 3386, LY 3386
Mazeichnung Package Outlines
Area not flat
0.4 (0.016) 0.7 (0.028)
0.4 (0.016) 0.8 (0.031)
0.6 (0.024)
0.4 (0.016)
4.8 (0.189) 4.4 (0.173)
3.4 (0.134) 3.1 (0.122)
2.54 (0.100) spacing
o2.9 (0.114)
o2.7 (0.106)
1.1 (0.043)
0.9 (0.035)
1.8 (0.071) 1.2 (0.047)
3.7 (0.146) 3.5 (0.138) 6.1 (0.240) 5.7 (0.224)
0.6 (0.024) 0.4 (0.016)
29.0 (1.142)
Cathode
27.0 (1.063)
GEXY6045
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Kathodenkennung: kurzerer Lotspie Cathode mark: short solder lead Gewicht / Approx. weight: 0.15 g
2001-02-13
8
LS 3386, LA 3386, LO 3386, LY 3386
Lotbedingungen Soldering Conditions Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802)
300 C T 250 235 C ... 260 C
OHLY0598
10 s
Normalkurve standard curve 2. Welle 2. wave Grenzkurven limit curves
200 1. Welle 1. wave 150 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling ca 200 K/s 5 K/s 2 K/s
0 0 50 100 150 t 200 s 250
Empfohlenes Lotpaddesign Recommended Solder Pad
Wellenloten (TTW) TTW Soldering
4 (0.157)
OHLPY985
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch)
2001-02-13
4.8 (1.890)
9
LS 3386, LA 3386, LO 3386, LY 3386
Revision History: 2001-02-13 Previous Version: Page 2001-02-13 Subjects (major changes since last revision)
Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2001-02-13
10

▲Up To Search▲

Price & Availability of LA3386-MQ

	To Download LA3386-MQ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .