 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com X00619 0.8 A sensitive gate SCR Features IT(RMS) = 0.8 A VDRM / VRRM = 600 V IGT = 30 to 200 A G A K Applications Limited gate current topologies Ground fault circuit interrupters Overvoltage crowbar protection in power supplies Protection in electronic ballasts Capacitive discharge ignitions Ignitors (lighting, oven...) Table 1. Device summary IT(RMS) VDRM / VRRM IGT 0.8 A 600 V 30 to 200 A K G A TO-92 (X00619-MA) Description The X006 SCR can be used as on/off function in applications where topology does not offer high current for gate triggering. This device is optimized in forward voltage drop and inrush current capabilities for reduced power losses and high reliability in harsh environments. May 2009 Doc ID 15755 Rev 1 1/7 www.st.com 7 www..com Characteristics X00619 1 Table 2. Symbol IT(RMS) IT(AV) ITSM It di/dt IGM PG(AV) Tstg Tj Characteristics Absolute ratings (limiting values, TJ = 25 C unless otherwise specified) Parameter On-state rms current (180 Conduction angle) Average on-state current (180 Conduction angle) Non repetitive surge peak on-state current It Value for fusing Critical rate of rise of on-state current IG = 2 x IGT , tr 100 ns Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range tp = 8.3 ms tp = 10 ms tp = 10 ms F = 60 Hz tp = 20 s TL = 85 C TL = 85 C Tj = 25 C Tj = 25 C Tj = 125 C Tj = 125 C Tj = 125 C Value 0.8 0.5 10 A 9 0.4 50 1 0.1 - 40 to + 150 - 40 to + 125 A2s A/s A W C Unit A A Table 3. Symbol IGT VGT VGD VRG IH IL dV/dt Electrical characteristics (TJ = 25 C unless otherwise specified) Test conditions MIN. VD = 12 V, RL = 140 MAX. 0.8 VD = VDRM, RL = 3.3 k , RGK = 1 k IRG = 10 A IT = 50 mA, RGK = 1 k IG = 1 mA, RGK = 1 k VD = 67% VDRM, RGK = 1 k Tj = 125 C Tj = 125 C MIN. MIN. MAX. MAX. MIN. 0.2 5 5 6 40 V V V mA mA V/s Value 30 A 200 Unit Table 4. Symbol VTM VTO Rd IDRM IRRM Static electrical characteristics (per diode) Test conditions ITM = 1 A, tp = 380 s Threshold voltage Dynamic resistance VDRM = VRRM, RGK = 1 k Tj = 125 C Tj = 25 C Tj = 125 C MAX Tj = 25 C Value 1.35 0.85 245 1 100 Unit V V m A A 2/7 Doc ID 15755 Rev 1 www..com X00619 Table 5. Symbol Rth(j-a) Rth(j-l) Junction to ambient (DC) Junction to lead (DC) Characteristics Thermal resistances Parameter Value 150 C/W 70 Unit Figure 1. Maximum average power dissipation vs. average on-state current Figure 2. Average and DC on-state current vs. case temperature P(W) 0.6 = 180 IT(AV)(A) 1.0 0.9 D.C. 0.5 0.8 0.7 0.6 = 180 0.4 0.3 0.5 0.4 0.2 360 0.3 0.2 0.1 IT(AV)(A) 0.0 0.0 0.1 0.2 0.3 0.4 0.1 0.0 Tl(C) 0 25 50 75 100 125 0.5 0.6 Figure 3. Average and DC on-state current vs. case temperature Figure 4. Relative variation of thermal impedance junction to ambient vs. pulse duration IT(AV)(A) 1.0 0.9 D.C. SCU = 0.5 cm2 Zth(j-a)/Rth(j-a) 1.00 SCU = 0.5 cm2 0.8 0.7 0.6 = 180 0.5 0.4 0.3 0.2 0.1 0.0 0 25 50 75 100 125 0.10 Tamb(C) 0.01 1.E-03 1.E-02 1.E-01 tp(s) 1.E+00 1.E+01 1.E+02 1.E+03 Doc ID 15755 Rev 1 3/7 www..com Characteristics X00619 Figure 5. Relative variation of gate trigger, holding and latching current vs. junction temperature Figure 6. Relative variation of holding current vs. gate-cathode resistance (typical values) IGT,IH,IL[Tj] / IGT,IH,IL[Tj=25C] 1.6 1.4 1.2 1.0 IH & IL IH[RGK] / IH[RGK=1k] 3.5 Typical values 3.0 2.5 2.0 1.5 0.8 0.6 0.4 0.2 IGT 1.0 0.5 Tj(C) 0.0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 0.0 1.E-02 1.E-01 RGK(k) 1.E+00 1.E+01 1.E+02 Figure 7. Relative variatiohn of dV/dt immunity vs. gate-cathode resistance (typical values) VD = 0.67 x VDRM Figure 8. Relative variation of dV/dt immunity vs. gate-cathode capacitance (typical values) VD = 0.67 x VDRM RGK = 1k dV/dt[RGK] / dV/dt[RGK=1k] 100.0 dV/dt[CGK] / dV/dt[RGK=1k] 100 10.0 10 1.0 RGK(k) 0.1 1.0E-01 1.0E+00 1.0E+01 CGK(nF) 1 1 10 Figure 9. Surge peak on-state current vs. number of cycles Figure 10. Non repetitive surge peak on state current for a sinusoidal pulse and corresponding value of I2T ITSM(A), I t (A s) 1.E+02 Tj initial = 25C ITSM 2 2 ITSM(A) 10 9 8 7 6 5 4 3 2 1 0 1 10 Repetitive TC=25C Non repetitive Tj initial=25C tp=10ms One cycle 1.E+01 1.E+00 I2t Number of cycles 1.E-01 tp(ms) 1000 0.01 0.10 1.00 10.00 100 4/7 Doc ID 15755 Rev 1 www..com X00619 Figure 11. On-state characteristics (maximum values) ITM(A) 10.00 Tj max.: Vt0=0.85V Rd=245m Ordering information scheme 1.00 Tj=125C Tj=25C 0.10 VTM(V) 0.01 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 2 Ordering information scheme Figure 12. Ordering information scheme X 006 19 M Sensitive SCR series Current 006 = 0.8 A Sensitivity 19 = 30 A to 200 A Voltage M = 600 V Package A = TO-92 Space One blank space Package 1AA2 = Bulk 2AL2 = Ammopack 5AL2 = Tape and reel A Blank 1AA2 Doc ID 15755 Rev 1 5/7 www..com Package information X00619 3 Package information Epoxy meets UL94, V0 In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Table 6. TO-92 (plastic) dimensions Dimensions Ref. Millimeters Min. A a B C Inches Min. 0.173 0.500 Typ. 0.053 0.100 Max. 0.185 0.146 0.019 Typ. 1.35 2.54 - Max. 4.70 3.70 0.50 A B C 4.40 12.70 - F D E D E F a 4 Ordering information Table 7. Ordering information Marking Package Weight Base qty 2500 X0619 MA TO-92 0.2 g 2000 2000 Delivery mode Bulk Ammopack Tape and reel Order code X00619MA 1AA2 X00619MA 2AL2 X00619MA 5AL2 5 Revision history Table 8. Date 26-May-2009 Document revision history Revision 1 First issue Changes 6/7 Doc ID 15755 Rev 1 www..com X00619 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 15755 Rev 1 7/7 |
Price & Availability of X00619
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |