View 17-21-R6C-AN2Q1B-3T_354323.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Technical Data Sheet 0805 Package Chip LED(1.0mm Height)
17-21/R6C-AN2Q1B/3T
Features
Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself will remain with in RoHS complaint version
Descriptions
The 17-21 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc.
Applications
Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use.
Device Selection Guide
Part No. 17-21/R6C-AN2Q1B/3T Chip Material AlGaInP Emitted Color Brilliant Red Resin Color Water Clear
Everlight Electronics Co., Ltd. Device No:DSE-0002219
http://www.everlight.com Prepared date:2-Sep -2009
Rev. 2
Page: 1 of 10
Prepared by: Yang Peng
17-21/R6C-AN2Q1B/3T
Package Outline Dimensions
-
+
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No:DSE-0002219
1.05
http://www.everlight.com Prepared date:2-Sep -2009
Rev. 2
Page: 2 of 10
Prepared by: Yang Peng
17-21/R6C-AN2Q1B/3T
Absolute Maximum Ratings (Ta=25)
Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 25 60 60 2000 -40 ~ +85 -40 ~ +90 Unit V mA mA mW V
Reflow Soldering:260 for 10 sec Hand Soldering:350 for 3 sec
Electro-Optical Characteristics (Ta=25)
Parameter
Luminous Intensity Viewing Angle Peak Wavelength
Dominant Wavelength
Symbol Iv 21/2 p d VF IR
Min. 36.0 --------617.5 ----1.75 -----
Typ. ----140 632 ----20 ---------
Max. 90.0 --------633.5 ----2.35 10
Unit mcd deg nm nm nm V A
Condition
IF=20mA
Spectrum Radiation Bandwidth Forward Voltage
Reverse Current
VR=5V
Notes:
1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V
Everlight Electronics Co., Ltd. Device No:DSE-0002219
http://www.everlight.com Prepared date:2-Sep -2009
Rev. 2
Page: 3 of 10
Prepared by: Yang Peng
17-21/R6C-AN2Q1B/3T
Bin Rang Of Dom. Wavelength
Group Bin E4 A E5 E6 E7 Min 617.5 621.5 625.5 629.5 Max 621.5 625.5 629.5 633.5 nm IF=20mA Unit Condition
Bin Rang Of Luminous Intensity
Bin N2 P1 P2 Q1 Min 36.0 45.0 57.0 72.0 Max 45.0 57.0 72.0 90.0 mcd IF=20mA Unit Condition
Bin Rang Of Luminous Voltage
Group B Bin 0 1 2 Min 1.75 1.95 2.15 Max 1.95 2.15 2.35 V IF=20mA Unit Condition
Notes:
1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V
Everlight Electronics Co., Ltd. Device No:DSE-0002219
http://www.everlight.com Prepared date:2-Sep -2009
Rev. 2
Page: 4 of 10
Prepared by: Yang Peng
17-21/R6C-AN2Q1B/3T
Typical Electro-Optical Characteristics Curves
Spectrum Distribution Relative luminous intensity (%) 100 75 Ta=25C I (mA) 50 40 30 25 20 10 0 1.2 1.6 2.0 2.4 2.8 3.0 Forward Current vs. Forward Voltage Ta=25C
50 25
0 500
550
600
650
700
Wavelength (nm) Luminous Intensity vs. Relative luminous intensity (%) Relative luminous intensity (%) 1000 Ambient Temperature 1000 Luminous Intensity vs Forward Current Ta=25C
f=1KHz Duty=1/10
Forward Current
100
100
10
10
1 -60 -40 -20
0 20 40 60 80 100
1 10
10
10
Ambient Temperature Ta (C) Forward Current Derating Curve 50 IF(mA) 40 30 25 20 10 0 0 20 1.0 0.9 0.8 0.7
Forward Current IF(mA) Radiation Diagram 0 Ta=25C 10 20 30
40 50 60 70 80 90
Forward Current
40
60
85
100
0.5 0.3
0.1 0.2 0.4 0.6
Ambient Temperature Ta (C)
Everlight Electronics Co., Ltd. Device No:DSE-0002219
http://www.everlight.com Prepared date:2-Sep -2009
Rev. 2
Page: 5 of 10
Prepared by: Yang Peng
17-21/R6C-AN2Q1B/3T
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Pb
EVERLIGHT
RoHS
CAT : XXX HUE : XXX REF : XXX
CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
MADE IN TAIWAN
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No:DSE-0002219
http://www.everlight.com Prepared date:2-Sep -2009
Rev. 2
Page: 6 of 10
Prepared by: Yang Peng
17-21/R6C-AN2Q1B/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No:DSE-0002219
http://www.everlight.com Prepared date:2-Sep -2009
Rev. 2
Page: 7 of 10
Prepared by: Yang Peng
17-21/R6C-AN2Q1B/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10%
No. 1
Items Reflow Soldering
Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.
Ac/Re 0/1
2
Temperature Cycle
22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS.
0/1
4 5 6 7
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd. Device No:DSE-0002219
http://www.everlight.com Prepared date:2-Sep -2009
Rev. 2
Page: 8 of 10
Prepared by: Yang Peng
17-21/R6C-AN2Q1B/3T
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage time 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No:DSE-0002219
http://www.everlight.com Prepared date:2-Sep -2009
Rev. 2
Page: 9 of 10
Prepared by: Yang Peng
17-21/R6C-AN2Q1B/3T
4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Reliability Test Items And Conditions Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
The reliability of products shall be satisfied with items listed below.
Everlight Electronics Co., Ltd. Device No:DSE-0002219
http://www.everlight.com Prepared date:2-Sep -2009
Rev. 2
Page: 10 of 10
Prepared by: Yang Peng

▲Up To Search▲

Price & Availability of 17-21-R6C-AN2Q1B-3T

	To Download 17-21-R6C-AN2Q1B-3T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .