Part Number Hot Search : 
8251A MBRP300 AOB414 C85FCCBA BB1F3P 74F323PC EG2325A AQV251
Product Description
Full Text Search
 

To Download L4-2495-002 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 COMMERCIAL LASERS
High-Power 4.5 W 808 nm Fiber-Coupled Diode Laser 2495-L4 Series
Key Features
* 4.0 W output power at 808 nm * 4.5 W output power at 812 nm * High reliability * 105 m aperture * 0.22 NA * Isolated electrical contacts
Applications
* Solid-state laser pumping * Medical procedures * Direct-diode application
The highly reliable JDSU 2495-L4 series diode lasers offer 4 W of laser power from a 105-m fiber into a 0.22 numerical aperture (NA) at 808 nm. It is an ideal source for pumping solid-state materials such as Nd: YAG and Nd: Vanadate. In addition, a 4.5 W version is available at 812 nm for applications with broader wavelength tolerances such as medical and dental. The L4 multimode pump module is based on single-emitter diode lasers, and allows for a radical departure from standard bar-based pumping architectures. Hundreds of watts of highly reliable pump power can be achieved with a distributed architecture using multiple L4 diode lasers and a multimode fiber coupler or fiber bundle. In a distributed architecture, cascading failure modes are avoided, and ensemble statistics can be used to predict pump assembly lifetimes. The L4 multimode pump module eases thermal management by distributing the diode lasers (heat sources), allowing for a simple air- or water-cooled architecture in laser pumps and direct diode applications.
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com
2495-L4 SERIES
2
Dimensions Diagram (Specifications in mm unless otherwise noted.) Standard Tolerances mm: x.x = 0.5 x.xx = 0.25
11.8 2x 4.3 2X 2.5 2x A
1 13 17 Strain relief boot Metal case
7.5
B
31
10 8.5
(3.9 )
1.5 3.9 2.54
7.7
Pinout
Pin A B
Description Laser cathode (-) Laser anode (+)
2495-L4 SERIES
3
Specifications for 808 nm1
Parameter Laser Characteristics CW output power, 0.22 NA Mean wavelength2 Spectral width (90% integrated power) Slope efficiency Conversion efficiency Threshold current Operating current (BOL) Forward voltage Series resistance Recommended case temperature Wavelength tuning vs. temperature3 Wavelength tuning vs. output power Fiber Characteristics Fiber core diameter Fiber numerical aperture Fiber cladding Fiber buffer Fiber length
1. All performance data is measured at 25C, beginning of life (BOL). 2. Weighted average "center of mass" spectral point at 25C at PO 3. Change in mean with case temperature over Top
Symbol
Minimum
Typical
Maximum
Po p D Ith Iop Vf Rs Tc /T /P dc NA dcl db lf
4.0 W 805 nm 18C 0.20 0.9 m
808 nm 2 nm 1.0 W/A 43% 950 mA 4.8 A 2.0 V 0.07 25C 0.3 nm/C 1.6 nm/W 105 m 0.22 125 m 250 m 1m
811 nm 5 nm 1100 mA 5.7 A 2.1V 35C 0.24 -
Specifications for 812 nm1
Parameter Laser Characteristics CW output power, 0.22 NA Mean wavelength2 Spectral width (90% integrated power) Slope efficiency Conversion efficiency Threshold current Operating current (BOL) Forward voltage Series resistance Recommended case temperature Wavelength tuning vs. temperature3 Wavelength tuning vs. output power Fiber Characteristics Fiber core diameter Fiber numerical aperture Fiber cladding Fiber buffer Fiber length
1. All performance data is measured at 25C, beginning of life (BOL). 2. Weighted average "center of mass" spectral point at 25C at PO 3. Change in mean with case temperature over Top
Symbol
Minimum
Typical
Maximum
Po p D Ith Iop 915 nm Vf Rs Tc /T /P dc NA dcl db lf
4.5 W 804 nm 18C 0.20 0.9 m
812 nm 2 nm 1.0 W/A 43% 950 mA 5.3 A 2.0 V 0.07 25C 0.3 nm/C 1.6 nm/W 105 m 0.22 125 m 250 m 1m
820 nm 6 nm 1100 mA 6.3 A 2.1 V 35C 0.24 -
2495-L4 SERIES
4
Absolute Maximum Ratings
Parameter Operating current Reverse voltage Case operating temperature1 Storage temperature2 Lead soldering temperature, 10 s max Relative humidity, non-condensing, ambient < 45C Electrostatic discharge (ESD)3 Fiber bend radius (long term deployment)4 Fiber axial pull force, 15 s Fiber side pull force, 15 s
Symbol Iop Vrvs Top Tstg Tls RH Vesd
Minimum 15C -30C 30 mm -
Typical -
Maximum 6.5 A 2.0 V 40C 70C 300C 85% 500 V 5N 2.5 N
1. Non-condensing, maximum 2. Non-condensing, 2000 hours 3. C = 100 pF, R = 1.5 k,, human body model, shown to be not damaging to its LI characteristics or its reliability, I-V curves may change in this ESD environment 4. Minimum bend radius of 30 mm is for long term mechanical fiber reliability
Configurations
Product Code L4-2495-001 L4-2495-002
Wavelength Range 804 - 820 nm 805 - 811 nm
Fiber NA 0.22 0.22
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide, or via e-mail at customer.service@jdsu.com.
Sample: L4-2495-001
2495-L4 SERIES
User Safety
Safety and Operating Considerations The laser light emitted from this diode laser is invisible and may be harmful to the human eye. Avoid looking directly into the diode laser or into the collimated beam along its optical axis when the device is in operation. CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. Operating the diode laser outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with the component must be employed such that the maximum peak optical power cannot be exceeded. CW diode lasers may be damaged by excessive drive current or switching transients. When power supplies are used, the diode laser should be connected with the main power on and the output voltage at zero. The current should be increased slowly while the diode laser output power and the drive current are monitored. Device degradation accelerates with increased temperature, and therefore careful attention to minimizing the case temperature is advised. For example, life expectancy will decrease by a factor of four if the case is operated at 50 C rather than 25 C. A proper heatsink for the diode laser on a thermal radiator will greatly enhance laser life. Firmly mount the laser on a radiator with a thermal impedance of less than 0.5 C/W for increased reliability. ESD PROTECTION--Electrostatic discharge is the primary cause of unexpected diode laser failure. Take extreme precaution to prevent ESD. Use wrist straps, grounded work surfaces, and rigorous antistatic techniques when handling diode lasers.
Labeling
21 CFR 1040.10 Compliance Because of the small size of these devices, each of the labels shown is attached to the individual shipping container. They are illustrated here to comply with 21 CFR 1040.10 as applicable under the Radiation Control for Health and Safety Act of 1968.
Serial Number Identification Label
L4-ABC123
Model:
L4-2495-001 JDSU 3 Hongmian Road Futian Free Trade Zone Shenzhen 518038 Made in: China
Output Power Danger Label
DANGER
INVISIBLE LASER RADIATION*
AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION
GaAlAs Diode CW 10 W max. CLASS IV LASER PRODUCT *SEE MANUAL
3110
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com 2495L4.DS.CL.AE November 2008
Product specifications and descriptions in this document subject to change without notice. (c) 2008 JDS Uniphase Corporation 30162569 000 1108
12/05/07
Serial:
L4-ABC123


▲Up To Search▲   

 
Price & Availability of L4-2495-002

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X