View PSA-12E_336922.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

* Choose model with 120V ac North American power cord, or with 220V ac Euro power cord * Includes pre-wired 9-pin D-sub connector for direct connection to LED lights * Tough ABS housing
PSA-12 Models
Models
PSA-12
Input
100-250V ac 50/60 Hz 1.1 A max @ 100V ac
Input Cord
North America (NEMA 5-15) Cont. Europe (Schuko CEE 7)
Output
Output Cable
Used with
Connections
Pin 1 = +V Pin 2 = dc common Pin 3 = dc common Pin 4 = +V Pin 5 = +V
PSA-12E
1.8 m (6') 12V dc 5% Terminated with with voltage 9-pin D-sub regulation of 1% connector 3.5 A max. (female pins)
Continuous LED lights
Environmental Rating Operating Conditions
IEC IP20; NEMA 1 Temperature: 0 to 50C (+32 to 122F) Maximum relative humidity: 95% at 40C (non-condensing)
86.4 mm (3.40")
149.1 mm (5.87")
1.8 m (6.0')
50.8 mm (2.00")
Accessory Extension Cables
Models
DB906 DB910 DB9Y
Length
1.8 m (6')
Configuration
Terminated both ends with 9-pin D-sub connector, for continuous lights 3.0 m (10') (one end male pins and opposite end female pins) 1.8 m (6') Y cable for powering 2 lights from one supply, for continuous lights
These models are not stocked and are non-returnable.
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied.
Printed in USA
05/01
P/N 67445
Banner Engineering Corp., 9714 Tenth Ave. No., Mpls., MN 55441 * Ph: 763.544.3164 * www.bannerengineering.com * Email: sensors@bannerengineering.com

▲Up To Search▲

Price & Availability of PSA-12E

	To Download PSA-12E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .