|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
T6 Vishay Sfernice 1/4" Multiturn Fully Sealed Container Cermet Trimmers FEATURES * * * * * * * * * * * * Military and professional grade 0.25 Watt at 85C CECC 41 101-005 (A, B, C, D) MIL-R-22097 (RJ26) GAM T1 Space saving Excellent stability Low contact resistance variation 1% typical Fully sealed Excellent setting accuracy Wide range of ohmic values Tape and reel available Due to their square shape and small size (6.8 x 6.8 x 5mm), the multiturn trimmers of the T6 series are ideally suited for PCB use, enabling high density board mounting with reduced space requirement between cards. Four versions are available differing by the top or side position of the adjustment screw and by PC pins configuration. The use of cermet for the resistive track ensures an excellent stability of nominal specifications throughout life. DIMENSIONS in millimeters T6XA (PM 84) C screwdriver slot 0.5 x 0.5 O 0.45 2.54 2.54 2.3 0.2 6.8 0.2 4 min. 5 max. a b c TERMINAL SPACING ON A 2,54 PCB a b c 6.8 0.2 0.25 0.7 O 1.8 5.7 0.1 1 0.1 T6XB (PM 84) A 1.2 0,3 2.54 6.8 0.2 4 min. 5 max. a b c a b c 2.54 2.54 screwdriver slot 0.5 x 0.5 6.8 0.2 0.25 0,7 O 1.8 5.7 0.1 1 0.1 T6YA (PM 84) D O 0.45 2.54 2.54 2.3 0.2 7,8 max. 6.8 0.2 4 min. 5 max. 1 0.1 1.3 0.1 a b c O 1.8 6.8 0.2 a b c 0.25 T6YB (PM 84) B 1.2 0.3 2.54 2.54 2.54 6.8 0.2 4 min. 5 max. 1 0.1 1.3 0.1 a b c O 1.8 6.8 0.2 a b c 0.25 T6ZA 6.8 0.2 O 1.8 6.8 0.2 c b a 3.7 2.54 2.54 1.3 0.1 c b a T6ZB 6.8 0.2 O 1.8 6.8 0.2 1 0.1 c b a 2.54 2.54 5 max. 4 min. c b a 2.54 3.7 CIRCUIT DIAGRAM a (1) c (3) b (2) cw Undergoes European Quality Insurance System (CECC) Document Number: 51023 Revision 04-Mar-02 For technical questions, contact sfer@vishay.com www.vishay.com 55 T6 Vishay Sfernice 1/4" Multiturn Fully Sealed Container Cermet Trimmers cermet 13 turns 2 10 to 2.2M 1 - 2.2 - 4.7 and 1 - 2 - 5. 10% 5% 0.25 W at + 85C See Standard Resistance Element Data Linear Law 250 V 2% Rn or 2 1 1000 V Standard On Request Power Rating Linear Temperature Coefficient Limiting Element Voltage Contact Resistance Variation End Resistance (Typical) Dielectric Strength (RMS) ELECTRICAL SPECIFICATIONS Resistive Element Electrical Travel Resistance Range Standard Series E3 and Series Tolerance Insulation Resistance (500 VDC) 106M MECHANICAL SPECIFICATIONS Mechanical Travel Operating Torque (max. Ncm) End Stop Torque Unit Weight (max. g) 15 turns 1 clutch action 0.5 POWER RATING CHART 0.25 RATED POWER IN WATT ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing - 55C + 155C 55/125/56 fully sealed container IP67 0 0 50 85 100 155 AMBIENT TEMPERATURE IN DEGREES CELSIUS PERFORMANCE CECC 41100 TESTS CONDITIONS Phase A dry heat 125C Phase B damp heat Phase C cold - 55C Phase D damp heat 5 cycles 56 days 200 cycles 1000 h at rated power 90'/30' - ambient temp. 85C 5 cycles -55C to +125C 50 g 11 ms 3 successive shocks in 3 directions 10-55 Hz 0,75 mm or 10 g during 6 hours RT (%) RT R1-2 TYPICAL VALUES AND DRIFTS REQUIREMENTS R1-2(%) RT (%) RT R1-2 (%) R1-2 Climatic Sequence 2% 3% 0.5% 1% Long Term Damp Heat Rotational Life Load Life Rapid Temperature Change Shocks 2% 3% 0.5% 1% Dielectric strength : 250 V Dielectric strength : 1000 V4 Insulation resistance : > 100 M Insulation resistance : > 10 M 2% Contact res. variat.: < 3% Rn 2% Contact res. variat.: < 1% Rn 2% 4% 1% 2% Contact res. variat.: < 3% Rn Contact res. variat.: < 1% Rn V1-2 V1-2 1.5% 1% 0.5% 1% V1-3 V1-3 1% V1-2 V1-3 2% 0.1% V1-2 V1-3 0.2% 0.2% Vibrations 1% 2% 0.1% www.vishay.com 56 For technical questions, contact sfer@vishay.com Document Number: 51023 Revision 04-Mar-02 T6 1/4" Multiturn Fully Sealed Container Cermet Trimmers STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES 10 22 47 100 220 470 1k 2.2k 4.7k 10k 22k 47k 100k 220k 470k 1M 2.2M LINEAR LAW Vishay Sfernice MARKING Printed : VISHAY trademark, series, style, ohmic value (in , k, M), tolerance (in %), manufacturing date, marking of terminal c. MAX. POWER AT 85C W 0.25 MAX. CUR. MAX. WORKING THROUGH VOLTAGE ELEMENT V 1.58 2.34 3.53 5 7.42 10.8 15.8 23.4 34.3 50 74.2 108.4 158 234 250 250 250 mA 158 107 73 50 34 23 15.8 10.7 7.3 5 3.37 2.31 1.58 0.97 0.53 0.25 0.11 T.C. - 55C + 125C ppm/C 0 + 200 100 0.25 0.13 0.06 0.028 PACKAGING - In magazine pack (tube) by 50 pieces code "TU50". ORDERING INFORMATION T6 SERIES XA VERSION 470k OHMIC VALUE 10 % TOLERANCE TU50 PACKAGING TU50 : Tube N.B.: On delivery the wiper is positioned at mid-travel. Document Number: 51023 Revision 04-Mar-02 For technical questions, contact sfer@vishay.com www.vishay.com 57 |
Price & Availability of T6 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |