 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VX-189 Hi-Reliability Voltage Controlled Crystal Oscillator VX-189 Features * * * * Hybrid Sinewave design Processed in accordance with MIL-PRF-55310D, Class S Frequency Range: 201 MHZ to 500 MHZ Previous Model: 487Y(HHHH) * Applications Performance Speci cations Parameter vs. operating temperature range (referenced to +25C) Initial Tolerance vs. supply voltage change vs. load change vs. aging / 1 year vs. aging / year (following years) Min -25 -2.25 -2.0 -0.5 -3 -2 Typ Max +25 +2.25 +2.0 +0.5 +3 +2 Units 1 Condition -20... +70C at +25C VS 5% Load 10% Frequency Stabilities ppm ppm ppm ppm ppm ppm Supply Voltage (Vs) Supply voltage Power consumption 14.25 15.0 15.75 50 RF Output Signal Output Power www..com Output Power Harmonics Sub-Harmonics Spurious Short Term Stability 0 +7 -20 -30 -80 0.01 0.1 1.0 10 Sinewave dBm dBm dBc dBc dBc ppb ppb ppb ppb 1 ms 10 ms 100 ms 1 sec 50 Ohm load 50 Ohm load VDC mA Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Performance Speci cations Parameter Tuning Range Linearity Tuning Slope Control Voltage Range 0.0 2.5 Min -60 Typ Max +60 10 Positive 5.0 Units ppm % Condition Frequency Tuning (EFC) VDC Additional Parameters Crystal: Components: Rework: Class "S" screened: 100% PIND testing: Group A & B: Salt Spray: Standard shock and vibration (survive; met by design, not tested): Swept quartz, AT, 3 point mount Class "S" Microelectronic element evaluation per Appendix B of MIL-PRF-55310D In accordance with MIL-PRF-55310D, Class S In accordance with MIL-PRF-55310D, Table III, including internal visual inspection per MIL-STD-883, Method 2017, and PIND testing In accordance with MIL-STD-883, Method 2020, Condition B. We may use a VI approved material as a "getter" in our manufacturing process to help pass PIND. 100% Group A and 100% Group B testing Salt spray/salt atmosphere not included in this speci cation. Shock: 100G, 6 ms per MIL-STD-202, Method 213, Condition C Vibration: Sine: 20G to 2 kHz per MIL-STD-202, Method 204, Condition D Random: 20 Grms overall to 2 kHz per MIL-STD-202, Method 214, Condition I-F 1. Notes: Active parts are of bi-polar technology and, therefore, are inherently radiation tolerant. If required, VI will provide a parts list and schematic (NDA required) for review and approval of radiation hardness. Engineering models are t, form and function representative of Flight Models and of commercial construction using commercial parts of same generic type as Flight Models. Completed oscillators are not screened, will not contain swept quartz, and are not suitable for ight, DPA, or RGA. Engineering models will not be processed to pass PIND. 2. www..com Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Outline Drawing / Enclosure Type C Code 0 Height "H" 0.30" Pin Length NA Pin Connections 1 12 13 VCXO input Ground (Case) RF Output Supply Do Not Use (may be used internally) www..com 24 others Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Ordering Information VX - 189 0 - A E J - M X S X - 10M0000000 Frequency Product Family VX: VCXO Package 25 x 36 mm Height 0: C0.30" Supply Voltage A: 15 Vdc Platform Code Output Power 0: 0 dBm 1: +7 dBm Screening Option S: "S" Level Screening Enable: X: No Enable RF Output Code E: Sinewave Pullability Code M: 60ppm Temperature Range J: -20... +70C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modi cation. 5. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road Hudson, NH 03051 www..com Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 1/27/2009 daf Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com |
Price & Availability of VX-189
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |