 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VX-501 Voltage Controlled Crystal Oscillator VX-501 Features * * * * * * * * * * * * * AT-Cut Crystal Surface Mount FR4 based package Reflow Process Compatible Low Phase Noise Tight Stabilities Frequency Range 1 - 800MHz Standard Frequencies 2.048; 10; 16,384; 30,72; 32,768; 38,88; 44.8; 52; 61.44; 68.736; 76.8; 77.76; 81.92; 92.16; 100; 112; 122.88; 125; 134.4; 153.6; 155.52; 160; 179.2; 184.32; 245.76; 312.5; 320; 368.64; 400; 448; 471.8592; 491.52; 622.08; 672; 737.28; 800MHz Previous Model Number: C5310 * * * * Applications Base Stations Test Equipment Synthesizers Switching Performance Specifications Frequency Stabilities1 Parameter vs. operating temperature range (referenced to +25C) Initial tolerance vs. supply voltage change vs. load change vs. aging / 1 Year vs. aging (following years) vs. operating temperature range (referenced to +25C) Min -15 -10 -3 -1 -3 -1 -30 -15 -3 -2 -3 -1 Typical Max +15 +10 +3 +1 +3 +1 +30 +15 +3 +2 +3 +1 Units ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm Condition -20 to +70C @Vc=Vs/2 VS 5% Load 10% -40 to +85C @Vc=Vs/2 VS 5% Load 10% www..com Initial tolerance vs. supply voltage change vs. load change vs. aging / 1 Year vs. aging (following years) Page 1 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Performance Specifications Supply Voltage (Vs) Parameter Supply voltage (standard) Current consumption Current consumption Supply voltage Current consumption Current consumption Signal Load Rise and Fall time Duty cycle Signal Load Rise and Fall time Duty cycle Signal Load Rise and Fall time Duty cycle Signal Load Output Power Tuning Range Linearity Tuning Slope Control Voltage Range Frequency Control Input Impedance Phase Noise 0 0.5 10 1.65 2.5 -3 50 0 3 40 Sinewave dBm 100 1 60 45 LVDS ns % 10 to 90% 50 1 55 40 PECL % Options with Vs = 3.3V with Vs = 5V @52MHz HCMOS 3.3V @ 155.52 MHz PECL 3.3V @ 155.52 MHz LVDS 3.3V @ 622.08 MHz PECL 3.3V ns 20 to 80% 15 5 60 HCMOS pF ns % @ 15 pF 10 to 90% @ Vs / 2 4.75 5 Min 3.135 Typical 3.3 Max 3.465 40 90 5.25 30 80 Units VDC mA mA VDC mA mA Condition @ HCMOS, Sinewave @ PECL, LVDS @ HCMOS, Sinewave @ PECL, LVDS Options RF Output Frequency Tuning (EFC) 75.0 90 200.0 10 % Positive 3.3 4.5 VDC VDC k Additional Parameters -85 -115 -138 -153 -155 0.2 -80 -105 -135 -143 -145 0.6 -80 -112 -130 -150 -155 0.2 -55 -85 -115 -140 -150 0.1 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz @ 12kHz .. 20MHz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz @ 12kHz .. 20MHz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz @ 12kHz .. 20MHz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz @ 12kHz .. 20MHz Jitter Phase Noise Jitter Phase Noise www..com Jitter Phase Noise Jitter Page 2 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Performance Specifications Additional Parameters Subharmonics Weight Processing & Packing Supply voltage (Vs) Operable Temperature Range Storage Temperature Range -40 -55 -40 2.0 g Handling & Processing Note dBc For > 160 MHz only Absolute Maximum Ratings 6.0 +85 +125 V C C Cross Reference List Cross Reference List Typical Phase Noise and Jitter Phase Noise VX-501 @ 52 MHz HCMOS Phase Noise VX-501 @ 155.52 MHz LVPECL Phase Noise VX-501 @ 155.52 MHz LVDS Phase Noise VX-501 @ 622.08 MHz LVPECL www..com Page 3 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Enclosure Package Codes Type G223B Height "H" 5.9 Pin Length "L" NA Type G218B Package Codes Height "H" 5.9 Pin Connections 1 2 3 4 Control Voltage (Vc) Ground RF Output Supply Voltage Input (Vs) 1 2 3 4 5 6 Pin Connections Control Voltage (Vc) N.C. / Enable (Option) Ground RF Output RF Output complementary (PECL / LVDS) N.C. (CMOS) Supply Voltage Input (Vs) Marking VX-501-xxxx Frequency AYYWW Pin 2 High Open Low Enable true table (optional) HCMOS Pin 4 Data Data High Tristate Pin 5 N.C. N.C. N.C. LVPECL / LVDS Pin 4 No Data Data Data Pin 5 No Data Compl. Data Compl. Data www..com Page 4 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Standard Shipping Method Lage im Gurt Position in tape Pin 1 A X B K P Enclosure Type G218B/G223B *bei W 24 mm nur untere Lochreihe by W 24 mm only lower hole line Abwickelrichtun Unwinding direc Gurtunterseite Tape buttom side Gurtoberseite Tape upper side Tape Width W (mm) 24 Quantity per meter 83.3 Quantity per reel 850 Dimension P 12 Recommended Reflow Profile Profile Feature Average ramp-up rate (TL to TP) Preheat -Temperature Min TSmin -Temperature Min TSmax -Time (min to max) tS Pb-Free Assembly/ Sn-Pb Assembly 3C/second max. 150C 200C 60-180 seconds 3C/second max 217C 60-150 seconds max 260C Profile Feature Time 25C to Peak Temperature Time maintained above -Temperature (TL) -Time (tL) Pb-Free Assembly/ Sn-Pb Assembly 8 minutes max. 217C 60-150 seconds TSmax to TL -Ramp-up Rate Time maintained above -Temperature (TL) -Time (tL) Peak Temperature (TP) Time within 5C of actual Peak Temperature (tP) Ramp-down Rate 20-40 seconds 6C/ second max Note: All temperatures refer to topside of the package, measured on the package body surface. www..com Page 5 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Ordering Information VX-501 0 - E A J - 105 0 - 52M0000000 Model Code Enable 0: No Enable 1: Enable Height 0: 5.9 mm (G223B) 1: 5.9 mm (G218B) Supply Voltage D: 5V E: 3.3V RF Output Code A: HCMOS C: PECL D: LVDS E: Sinewave Temperature Range E: -40C to +85C J: -20C to +70C Frequency Stability Code E-305: 30ppm J-105: 15ppm Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 www..com Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 7268-801-0 Fax: +49 (0) 7268-801-281 Asia: Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 8/2008 Page 6 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com |
Price & Availability of VX-501
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |