 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| APTML102UM09R004T3AG Linear MOSFET Power Module VDSS = 100V RDSon = 09m typ @ Tj = 25C ID = 154A* @ Tc = 25C Application * Electronic load dedicated to power supplies and battery discharge testing Features * * * * * Linear MOSFET Very low stray inductance Internal thermistor for temperature monitoring High level of integration AlN substrate for improved thermal performance Benefits 28 27 26 25 29 30 23 22 20 19 18 16 15 * * * * * * 31 32 2 3 4 7 8 10 11 12 14 13 Direct mounting to heatsink (isolated package) easy series and parallels combinations for power and voltage improvements Low junction to case thermal resistance Solderable terminals both for power and signal for easy PCB mounting Low profile RoHS Compliant Pins 13/14 ; 29/30 ; 31/32 must be shorted together Absolute maximum ratings (per leg) Symbol VDSS ID IDM VGS RDSon PD IAR EAR EAS Parameter Drain - Source Breakdown Voltage Continuous Drain Current Pulsed Drain current Gate - Source Voltage Drain - Source ON Resistance Maximum Power Dissipation Avalanche current (repetitive and non repetitive) Repetitive Avalanche Energy Single Pulse Avalanche Energy Tc = 25C Tc = 80C Max ratings 100 154* 115* 430 30 10 480 100 50 3000 Unit V A V m W A mJ November, 2009 1-3 APTML102UM09R004T3AG - Rev 0 Tc = 25C * Output current per leg must be limited to 67A @ TC=25C and 47A @ TC=80C to not exceed the shunt specification. In addition the current capability must be limited to 75A on pins 13/14 to not exceed current capability of the pins. In saturation mode These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com APTML102UM09R004T3AG All ratings @ Tj = 25C unless otherwise specified Electrical Characteristics (per leg) Symbol Characteristic IDSS RDS(on) VGS(th) IGSS Zero Gate Voltage Drain Current Drain - Source on Resistance Gate Threshold Voltage Gate - Source Leakage Current Test Conditions VGS = 0V,VDS = 100V VGS = 0V,VDS = 80V Min Tj = 25C Tj = 125C Typ VGS = 10V, ID = 69.5A VGS = VDS, ID = 2.5mA VGS = 30 V, VDS = 0V 9 2 Max 100 500 10 4 100 Unit A m V nA Dynamic Characteristics (per leg) Symbol Ciss Coss Crss Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Test Conditions VGS = 0V VDS = 25V f = 1MHz Min Typ 9875 3940 1470 Max Unit pF Shunt Electrical Characteristics (per leg) Symbol Characteristic Resistance value Rsh Tsh Tolerance Psh Ish Load capacity Current capacity TC=25C TC=80C TC=25C TC=80C Min Typ 4.4 2 Max Unit m % W A 20 10 67 47 Temperature sensor PTC Symbol R25 R100/R25 R-55/R25 B Characteristic Resistance @ 25C Resistance ratio Resistance ratio Temperature coefficient Tamb=100C & 25C Tamb=-55C & 25C Min 1980 1.676 0.48 Typ 1.696 0.49 7900 Max 2020 1.716 0.50 Unit ppm/K Thermal and package characteristics Symbol RthJC VISOL TJ TSTG TC Torque Wt Characteristic Junction to Case Thermal Resistance Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight Min MOSFET (per leg) 4000 -40 -40 -40 2.5 Typ Max 0.26 150 125 100 4.7 110 RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz C N.m g To heatsink M4 www.microsemi.com 2-3 APTML102UM09R004T3AG - Rev 0 November, 2009 Unit C/W V APTML102UM09R004T3AG SP3 Package outline (dimensions in mm) 1 See application note 1901 - Mounting Instructions for SP3 Power Modules on www.microsemi.com Typical Performance Curve (linear mode) (per leg) Drain Current vs Drain source voltage 100 TJ=125C Dissipated Power (W) Drain Current (A) 10 250 1 0 20 40 60 80 100 200 0 25 50 75 100 Drain Source Voltage (V) Drain Source Voltage (V) Microsemi reserves the right to change, without notice, the specifications and information contained herein Microsemi's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 6,939,743 7,352,045 5,283,201 5,801,417 5,648,283 7,196,634 6,664,594 7,157,886 6,939,743 7,342,262 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. www.microsemi.com 3-3 APTML102UM09R004T3AG - Rev 0 November, 2009 17 12 28 Power vs Drain source voltage 400 TJ=125C 350 300 |
Price & Availability of APTML102UM09R004T3AG
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |