 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EeRom-8U User's Guide Electronic Engineering Tools, Inc. 549 Weddell Drive Sunnyvale, CA 94089, USA www.eetools.com support@eetools.com Tel: (408) 734-8184 Fax:: (408) 734-8185 Copyright (c) 1992-2002 by E. E. Tools, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from E. E. Tools, Inc. DISCLAIMER E. E. Tools, Inc. MAKES NO REPRESENTATION OR WARRANTIES WITH RESPECT TO THE CONTENTS HEREOF AND SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MECHANTIBILLY OR FITNESS FOR ANY PARTICULAR PURPOSE. Further, E. E. Tools, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of E. E. Tools, Inc. to notify any person of such revision or changes. EEROM-8U and the E. E. Tools logo are trademarks of E. E. Tools, Inc. INTEL is a trademark of Intel Corporation. Motorola is a trademark of Motorola Inc. Microsoft is a registered trademark, and Windows, Windows98, Windows Me, Windows NT, and Windows2000 Professional are trademarks of Microsoft Corporation. All other trademarks or registered trademarks are property of their respective companies. www.eetools.com -2- EeRom-8U User's Guide CONTENTS DISCLAIMER ..................................................................................................................................................2 CONTENTS ....................................................................................................................................................3 CHAPTER........................................................................................................................................................5 I. INTRODUCTION ...................................................................................................................................6 II. SYSTEM REQUIREMENTS ..................................................................................................................7 CHAPTER........................................................................................................................................................9 I. USB DRIVER SETUP AND SOFTWARE INSTALLATION .............................................................10 1. To Install USB Driver........................................................................................ 10 2. To Install EeRom-8U Software ......................................................................... 10 II. HARDWARE SETUP AND INSTALLATION ...................................................................................12 1. EeRom-8U Features ........................................................................................ 12 2. To install Hardware ......................................................................................... 13 CHAPTER......................................................................................................................................................15 I. SOFTWARE ...........................................................................................................................................16 1. Toolbar Icons ................................................................................................. 16 2. Operation menu.............................................................................................. 19 1). Files ............................................................................................................................................................. 19 2). Buffer........................................................................................................................................................... 19 3). Transfer...................................................................................................................................................... 19 4). Target.......................................................................................................................................................... 20 5). Help ............................................................................................................................................................. 20 3. Structure......................................................................................................... 20 1). EEROM Control......................................................................................................................................... 20 2). Project Control......................................................................................................................................... 21 3). Option......................................................................................................................................................... 23 II. KEY PERFORMING EXAMPLE..........................................................................................................24 1. Program performs for the first time................................................................. 24 2. Data Split Mode............................................................................................... 24 CHAPTER......................................................................................................................................................26 I. TROUBLESHOOTING .........................................................................................................................27 Regardless of the symptom, verify the following: ................................................ 27 -3www.eetools.com EeRom-8U User's Guide Verifies, but target does not run ......................................................................... 27 Common problems and solutions........................................................................ 28 II. TECHNICAL SUPPORT .....................................................................................................................30 1. Calling Customer Support ............................................................................... 30 2. Service Information ......................................................................................... 30 3. Limited One-Year Warranty ............................................................................. 31 CHAPTER......................................................................................................................................................33 PIN ARRAY OF EEROM-8U ...................................................................................................................34 OPTION BOARD .....................................................................................................................................34 www.eetools.com -4- EeRom-8U User's Guide Chapter 1 INTRODUTION AND REQUIREMENT -5- www.eetools.com EeRom-8U User's Guide I. INTRODUCTION EeRom-8U ROM Emulator is aimed at developers who focus on making ROM based programs and data including embedded systems, BIOS, video games, robotics, printer drivers, graphic controller, postscript interpreters, character font libraries, and other ROM based application. In general, the emulator is used during program and data developing period to eliminate the frustration of repeated EPROM burn-erase cycles. EeRom-8U ROM Emulator easily plugs in place of the ROM through the emulator's target adapter. Other ROM Emulators can emulate only EPROM. But EeRom-8U ROM Emulator can emulate many types of memories (EPROM, Flash-ROM, EEPROM, NVRAM) currently used. So EeRom-8U ROM Emulator can be called a "memory emulator". Also EeRom-8U can properly operate with user's board using 8bit/16bit/32bit data bus. EeRom-8U ROM Emulator adopts USB interface. This helps the user to have faster communication speed than the parallel port. From this, the user can enormously reduce the developing time and adopt high speed SRAM(12ns) for matching well with high speed RISC and CISC CPU. Therefore both professional and novice program developers will find that EeRom-8U ROM Emulator can be an exceptional valuable tool. < The Characteristics of EeRom-8U > High speed USB interface (Supports Plug & Play) 1M Byte (8M bit) / sec download speed Supports 8bit data bus by itself Uses 1MB high speed memory for proper emulation : 12ns high speed SRAM Supports EeRom-8U without outside electric power supply Convenient software environment: supports Windows /98/ME/2000/XP Supports hex (Intel/Motorola type), binary file format Safety circuit against inverse insertion www.eetools.com -6- EeRom-8U User's Guide II. SYSTEM REQUIREMENTS The requirements to use the Windows graphical application are: Processor: IMB PC or compatible, Pentium / 100 MHz or better RAM: 5 MB DISK: 5 MB Port : USB Floppy drive for installation (unless obtained on the Internet, www.eetools.com OS: Windows 98/ME/2000/XP TARGET SYSTEMS Your target board requires the following memory type for proper emulation with EeRom-8U. The basic EeRom-8U unit supports 8Mbits with 45NS memory. EeRom-8U For supporting EEU100s needed EPROM DATA : 8BIT 27C64 27C128 27C256 27C512 27C010 27C020 27C040 27C080 EEPROM DATA : 8BIT FLASH ROM DATA : 8BIT 2864 28512 29512 29010 29020 29040 Software Setting for Target Memory ( Memory Type ) EPROM (2764) EPROM (27128) EPROM (27256) EPROM (27512) EPROM (27010) EPROM (27020) EPROM (27040) EPROM (27080) EEPROM (2864) EEPROM (28256) FLASH (29512) FLASH (29010) FLASH (29020) FLASH (29040) 8K 16K 32K 64K 128K 256K 512K 1M 8K 32K 64K 128K 256K 512K -7- www.eetools.com EeRom-8U User's Guide Supported PLCC Socket PLCC 32 Pin; ADP28:32PLCC-TO-28DIP, ADP32:32PLCCTO-32DIP) Memory Type 2764 27128 27256 27512 27010 27020 27040 27080 2864 28256 29512 29010 29020 29040 29080 8K Size (Bytes) Supported Memory 2764/A, 27C64, 27HC64 27128/A/B/D/DI, 27C128 27256, 27C256, 27H256, 27BV256, 27LV256 27512/AS, 27C512, 27LV512 27C010, 27H010, 27HB010, 27LV010/A/L 27C020, 27BV020, 27LV020, 27LC020, 27SF020, 27E020 27040, 27C040/Q, 27BV040, 27LV040 27C080, 27LV080 2864A/AE/B/BE, 28C64/A/AX, 28HC64/B, 28PC64/E, 28BV64, 28LV64/B 28C256, 28HC256 29C512, 29EE512/A, 29SF512 29010/L/V, 29C010A, 29F010/A/B, 29EE010/A,29SF010 29C020, 29EE020/A 29040/A/L/AL/V, 29F040/B Special port is required. 16K 32K 64K 128K 256K 512K 1M 8K 32K 64K 128K 256K 512K 1M www.eetools.com -8- EeRom-8U User's Guide Chapter 2 SETUP AND INSTALLATION -9- www.eetools.com EeRom-8U User's Guide I. USB DRIVER SETUP AND SOFTWARE INSTALLATION 1. To Install USB Driver If you are the first time user, when you connect EeRom-8U and USB Cable, PC will install Hardware Wizard by Plug and Play function in order to find the corresponding drive. As following the Hardware Wizard, choose ERUSB.INF provided with the instrument and install the driver. Afterwards, the program is saved to your PC so that whenever you connect EeRom-8U, the PC automatically finds the corresponding driver and installs it. 2. To Install EeRom-8U Software 1). Run the SETUP.EXE file located on the provided install version program, then a startup screen appears as shown below. Picture 1. Welcome message. 2). Follow the on-screen instruction, and choose a directory that you desire to install the program. www.eetools.com - 10 - EeRom-8U User's Guide Picture 2. Choosing the directory for installation 3). Click "Program" from the "Start" menu, and select program folder. Picture 3. Selecting program folder 4). After this is done, go back to Program Folder that you typed and run the program. - 11 - www.eetools.com EeRom-8U User's Guide II. HARDWARE SETUP AND INSTALLATION 1. EeRom-8U Features 1). EeRom-8U is a very high speed Memory Emulator made upon USB 1.1 Spec. 2). Up to 8 instruments can be connected, and the Software supports 16bit Split Mode and 32bit Split Mode as well. 3). USB Since EeRom-8U uses 5V power from USB Cable, no additional Target power or power adaptor is required. 4). Convenient Reset Control by the Software is provided. Picture 4-1. EeRom-8U 32pin Cable Socket Reset Out port Power LED(RED) and Status LED(2 color-Green / Red) Target Voltage Select(3V / 5V) USB Cable Socket Picture 4-2. EeRom-8U www.eetools.com - 12 - EeRom-8U User's Guide 2. To install Hardware All items composing EeRom-8U Supported Type Both Installation Disk USB Cable ( AB Type) Reset Clip Cable User's Manual EeRom-8U Emulator Main 1). Connect EeRom-8U and PC using USB Cable. 2). Check that a red light of Power LED is on. 3). Select EeRom-8U switch to either 3.3V or 5V depending upon Target power, and plug it in Target 4). Plug Cable's socket in where Target memory is placed after checking the pin number. 5). Turn on Target and download desired files using EeRom-8U. After downloading the files, EeRom-8U Software automatically resets and starts Target. * Reset : A user can select current Reset function of EeRom-8U with options. Choose Reset type (Reset High-Active High, Reset Low-Active Low) and Reset signal time (millisecond) from Software option. Click Target Run, and Target starts with Reset. 6). Turn off Target and remove EeRom-8U from the Target. Item Quantity 1 1 1 1 1 - 13 - www.eetools.com EeRom-8U User's Guide Picture 5. EeRom-8U Driver showed in Device Manager www.eetools.com - 14 - EeRom-8U User's Guide Chapter 3 EeRom-8U QUICK-START TUTORIAL - 15 - www.eetools.com EeRom-8U User's Guide I. SOFTWARE Picture 6. EeRom-8U Software. 1. Toolbar Icons . Project Open : Opening existing project or making new project. The file type is *.erp. Picture 7. Project Open Dialogue Box www.eetools.com - 16 - EeRom-8U User's Guide Project Save : Saving new project or changes made to project. File Add : Adding new file to project. Picture 8. Add File Dialogue Box File Remove : Removing file from project. Buffer Editor : Showing the data of added files to project in order. Picture 9. Buffer Editor - 17 - www.eetools.com EeRom-8U User's Guide Hide Program : Hiding program in Tray Icon Box. Tray Icon Box is where the bottom right of Window screen. Hide Popup Menu : The Menu appears when you place your mouse's pointer to the icon in Tray Icon Box and click once the right button of your mouse. Picture 10. Tray Icon and Popup Menu Exit Program : Exiting program. Show S/W : Returning program to Window screen. Quick download and Run : Performing Target Reset and Target Run with downloading under the circumstance that program is hidden. Double clicking icon in Tray Icon Box results in the same. Download : Loading each file to Buffer and download it to EeRom-8U that is assigned from Project Control Page. Upload : Sending the data that is downloaded to EeRom-8U device to PC Buffer and showing in Buffer Editor. Verify : Comparing file that is loaded in Buffer and data that is downloaded in EeRom-8U and showing errors if any occurs. Target Run : Performing Reset to start Target and letting EeRom-8U perform. Target Stop : Stopping EeRom-8U at Target. www.eetools.com - 18 - EeRom-8U User's Guide 2. Operation menu Picture 11. Main Menu 1). Files Add File : Adding new file to project. Remove File : Removing file from project. Load or Create Project : Opening existing project or making new project. Reopen : Reopening selected project from a list of created projects after opening program. Save Project : Saving any changes made to project. Save Project As... : Saving project as different name. Hide : Hiding Window screen in Tray Icon Box. Exit Program : Exiting program. 2). Buffer Edit Buffer : Showing added files to project in order. 3). Transfer File Download : Loading each file to Buffer and downloading it to EeRom-8U that is assigned from Project Control Page. File Upload : Sending data that is downloaded to EeRom-8U device to PC Buffer - 19 - www.eetools.com EeRom-8U User's Guide Verify : Comparing file that is loaded in Buffer and data that is downloaded in EeRom-8U and showing errors if any occurs. 4). Target Target Run : Performing Reset to start Target and letting EeRom-8U perform. Target Stop : Stopping EeRom-8U at Target. 5). Help 3. Structure Hardware and Project Control Tab is at the right of the main screen. 1). EEROM Control Working on this page before starting any project is recommended. Picture 12. `EEROM Control' Section Items : Up to 8 EeRom-8U can be connected. Serial /Ver. : Serial number and Hardware version of the connected EeRom8U appear, and "Not Connected" appears when EeRom-8U is not connected. Mem Type : Selecting Memory Type that is applied to the corresponding EeRom-8U. www.eetools.com - 20 - EeRom-8U User's Guide "Find EeRom-8U" Button : While using program, if additional EeRom-8U is connected or if Serial number and Hardware version of the connected EeRom-8U do not appear, click this button to find currently connected EeRom-8U and to rearrange Serial number in order. At this moment, order of EeRom-8U may change. 2). Project Control When you select file from project that is placed at the left of the main screen, this page automatically appears. In order to make any changes to this page, you have to choose file. EEROM Select : Choose an EeRom form the daisy-chained EeRoms. Your data will be downloaded to the selected EeRom unit. EEROM Start : This box indicates the beginning EeRom unit for downloading data. EEROM End : This box indicates the ending EeRom unit for the Data Split Select operation. Configured Size of Memory : Showing Memory Type of the selected EeRom8U at "EEROM Control" section. Picture 13. `Project Control' Section - 21 - www.eetools.com EeRom-8U User's Guide Data Split Select : There is no influence to original file, but when data is sent to Buffer, the data is split. 8bit : Data is sent without splitting. 16bit : Splitting data into Even and Odd. Even is assigned to EEROM Start that is selected from EEROM Select of Project Control, and Odd is assigned to EEROM End. 32bit : Splitting file as Word0, Word1, Word2, and Word0 is sent to EEROM Start, the rest are sent to EEROM End in order. Load as a Hexa file : If there is any file of project that its type is Hexa Format, and if the check box is selected, the selected file is read as Hexa Format. Otherwise, it is read as Binary Format. Address Information : This section explains the way in which EeRom unit is connected and the location in which EeRom will load files into. The total buffer memory size depends on the number of EeRom(s) and size of each unit selected in "EEROM Control" section. Buffer Start : This value indicates the buffer offset of the first byte to be loaded. The default value is 0. followed by "Editor Starts at". Buffer End : This value indicates the last address of the defined emulated ROM. It is only for user reference and may not able to change by user. In the total editor memory, the end address for the EeRom that you select in "EEROM Select" section is followed by "Editor Ends at". File Offset : This number indicates the start address of the file to be loaded. In the total editor memory, the start address for the EeRom that you select in "EEROM Select" section is www.eetools.com - 22 - EeRom-8U User's Guide 3). Option Picture 14. `Option' Section Reset Option : Selecting Reset that is performed when clicking Target Run. Target Reset Type : Selecting Target Type. (Reset High or Reset Low). Reset Duration : Selecting how long Reset signal is maintained. (millisecond). Operating Option : Selecting option for when clicking Download or Target Run button of program. This option is not saved to project and is applied whenever program performs. Verify after data file writing into EeRom-8U : After downloading file, performing Verify. Verify after data file reading from EeRom-8U : After uploading file, performing Verify. Default Buffer Value : Filling out empty portion of Buffer Editor with inputted data. - 23 - www.eetools.com EeRom-8U User's Guide II. KEY PERFORMING EXAMPLE 1. Program performs for the first time. The basic project name of this program is erusb.erp. When program performs for the first time and if project is created, you need to change another project name to different name. If the different name cannot be selected, project is not saved. The rest of all project need to be selected as different name, not erusb.erp. 1). Select desired Memory type to EeRom-8U connected to "EEROM Control" page. 2). Add file that you will work on to project. 3). Selecting that which file you download to which connected EeRom-8U device at "EEROM Select" menu of menu. 5). Selecting that starting Buffer address of downloaded file and file offset from "Address Information" menu. 6). "Selecting that Reset option that is applied when performing Target Run at "Option" page. 7). Starting downloading. *8). If project name is still erusb.erp, whether you want to save project as different name is asked when exiting program. If you click Cancel button, project is not saved; therefore, saving as different name is recommended. "Project Control" page. 4). "Selecting that whether you split the selected file at the left side of "Data Split" 2. Data Split Mode This program basically performs with 8bit(Byte) mode and supports splitting data of 16bit(Even, Odd) and 32bit(Word0, Word1, Word2, Word3). After loading file, this program performs within Buffer, and there is no effect to original file. 1). If downloading file with splitting to 16bit, 2 EeRom-8U instruments, and if it is 32bit, 4 instruments are required to be connected. 2). Selecting EeRom-8U instrument from Split Mode www.eetools.com - 24 - EeRom-8U User's Guide After connecting EeRom-8U instrument and reading Serial Number by program, EeRom-8U Software arranges Serial Number in order. In other words, EeRom-8U that has the lowest Serial Number becomes number 0. Afterwards, whenever you select Split mode, assigning Serial Number is started from the EeRom-8U that is selected from "EEROM Start" by program. - 8bit : Byte. - 16bit : Even, Odd. - 32bit : Word0, Word1, Word2, Word3. - 25 - www.eetools.com EeRom-8U User's Guide Chapter 4 TROUBLESHOOTING & TECHNICAL SUPPORT www.eetools.com - 26 - EeRom-8U User's Guide I. TROUBLESHOOTING Regardless of the symptom, verify the following: 1. 2. 3. There are no "dongles", security keys, switch boxes or other devices between the EeRom-8U download cable and the USB port. The target is powered up. All download, daisy-chain and target interface cables are tight and fully inserted. Verifies, but target does not run Target not being reset If the wrong reset output is being used or it is connected to the wrong spot on the target, it may not be resetting the target during the download. We would get a good download, but the target was fetching garbage during the transfer. Some processors In either will HALT, others will simply execute the random garbage they received. event, the processor will not "know" to start over and execute the new code. Try removing the reset line, turning off the target power for 10 seconds and then turning the power back on. If the target now comes up and runs, the reset signal connection was wrong. While you could do this after each load, we highly recommend correcting the reset problem to make resets automatic and to prevent the target from running garbage during the download. Emulator device size set wrong. The device SIZE configuration affects only the TARGET'S view of the emulator. The file will download and verify correctly as long as the emulator is large enough to hold the file. If the size is set too small, the target will not be able to access the entire file For example, if the file is 60,000 bytes long, it would load into an EeRom-8U However if the emulator is configured to emulate a 27256, the image. and verify properly. space. target would see only the first 32Kbytes mirrored into both halves of the 64KByte This is exactly what would happen if you burned the first 32Kbytes into a 27256 and plugged it into the same socket. - 27 - www.eetools.com EeRom-8U User's Guide Wrong PLCC or other adapters used. Any adapter used between the target cable and the target socket itself has the potential of introducing errors. model and manufacturer. In particular, PLCC footprints vary by EPROM size, Most FLASH chips are pinned out like In general, In general, small EPROMs (<1Mbit) generally have one pin out and larger EPROMs have a different pin out. large EPROMs. However, SOME small FLASH are wired like SMALL EPROMs. large devices (>=1Mbit) use a 32 pin DIP to 32 pin PLCC adapter. Smaller devices usually need a 28 pin DIP to 32 pin PLCC adapter but MIGHT need the 32 pin version. Give us a call if you are not sure. Common problems and solutions 1). Software doesn't recognize EeRom-8U device - Check that red Power LED of EeRom-8U is on. - Check that USB Cable is connected correctly. - Click "Setting" -> "Hardware Profile" -> "Device Manager"-> "Universal Bus Controller" and check that the corresponding driver is loaded correctly. - If you have any further questions, please contact with our technical assistances. 2). After downloading and Target Run, Target doesn't seem to be performing correctly. - Check that green light of Status LED is on when downloading. - Check that the selected Target power and EeRom-8U power are correct. - Check that the Cable and the socket are connected properly to Target. - If you have any further questions, please contact with our technical assistances. 3). Software is down and stops performing. - Unplug USB Cable and shut down Software. - After a while, connect the Cable again and start Software. - If matter seems not to be better, please contact with our technical assistances. 4). Reset doesn't start. - Check that Reset Cable is connected properly to Reset pin that is placed in the side of EeRom-8U. - Check that Reset Cable is connected to the right Reset terminal of Target. - Check that the selected Reset Type is correct from Option of Software and the www.eetools.com - 28 - EeRom-8U User's Guide Reset Duration is selected correctly. (For example, `0' is selected as a default value for Reset Duration.) Reset Duration is the time period that Reset Signal is maintained. If you have any further questions, please contact with our technical assistances. - 29 - www.eetools.com EeRom-8U User's Guide II. TECHNICAL SUPPORT 1. Calling Customer Support E.E. Tools provides telephone technical assistance during normal business hours (9:00 AM to 5:00 PM, Pacific time). Please call our Technical Support Department or your local E.E. Tools' distributor while you are at your computer and be prepared to repeat the sequence of steps leading up to the problem Have the following information ready when you call: - The invoice number for the user who bought the TopMax from E.E. Tools. - The distributor's name and the purchased date. - The model & serial number found in the posterior side of the programming module. - Your hardware software revision number from the option info screen. - Description of problem with error message. - The exact part number you are working with. 2. Service Information Before sending a unit in for service, call us at 408-734-8184 to obtain a Return Authorization Number (RMA). We will not repair your unit unless an RMA was issued. Warranty Service: Please return the product in the original package with proof of purchase to the below address. Clearly state in writing the performance problem and send any leads, connectors and accessories that you are using with the device. Non-Warranty Service: Return the product in the original packaging to the below address. Clearly state in writing the performance problem and return any leads, connectors and accessories that you are using with the device. Customers not on open account must include payment in the form of a money order or credit card. For the most current repair charges contact the factory before shipping the product. www.eetools.com - 30 - EeRom-8U User's Guide Return all merchandise to E.E. Tools, Inc., with pre-paid shipping. The flat-fee repair charge includes return ground shipping to addresses in North America only. For overnight shipments and non-North America shipping fees contact .E. Tools, Inc. 549 Weddell Drive Sunnyvale, CA 94089, USA TEL: (408) 734-8184 FAX: (408) 734-8185 Email: support@eetools.com Include with the instrument your complete return shipping address, contact name, phone number, and description of problem. 3. Limited One-Year Warranty E.E. Tools, Inc., warrants to the original purchaser that its product and the component parts thereof, will be free from defects in workmanship and materials for a period of one year from the date of purchase. E.E. Tools, Inc., will, without charge, repair or replace, at its option, defective products or component parts. Returned products must be accompanied by proof of the purchase date in the form of a sales receipt. To obtain warranty coverage in the U.S.A., this product must be registered by completing and mailing the enclosed warranty card to: E.E. Tools, Inc., 549 Weddell Drive Sunnyvale, CA 94089, USA within fifteen (15) days from proof of purchase. - 31 www.eetools.com EeRom-8U User's Guide Exclusions: This warranty does not apply in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs. It is void if the serial number is alternated, defeated, or removed. E.E. Tools, Inc., shall not be liable for any consequential damages, including without limitations to damages resulting from loss of use. Some states do not allow limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights and you may have other rights, which vary from state-to-state. Model Number:___________________ Date Purchased:______________ www.eetools.com - 32 - EeRom-8U User's Guide Chapter 5 APPENDIX - 33 - www.eetools.com EeRom-8U User's Guide PIN ARRAY OF EeRom-8U When using EeRom-8U for supporting 8bit data bus OPTION BOARD 1.ADP32: Conversion Adaptor from 32-PLCC to 32-DIP 2.ADP32: Conversion Adaptor from 32-PLCC to 28-DIP www.eetools.com - 34 - Electronic Engineering Tools, Inc. 549 Weddell Drive Sunnyvale, CA 94089, USA Tel: (408) 734-8184 Fax: (408) 734-8185 www.eetools.com |
Price & Availability of ADP32
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |