View PS9611_362765.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PHOTOCOUPLER
PS9611,PS9611L
HIGH NOISE REDUCTION, HIGH-SPEED 10 Mbps TOTEM POLE OUTPUT TYPE -NEPOC 8-PIN DIP PHOTOCOUPLER
Series-
DESCRIPTION
The PS9611 and PS9611L are optically coupled high-speed, totem pole output isolators containing a GaAlAs LED on the input side and a photodiode and a signal processing circuit on the output side on one chip. The PS9611 is in a plastic DIP (Dual In-line Package) and the PS9611L is lead bending type (Gull-wing) for surface mounting.
FEATURES
* High common mode transient immunity (CMH, CML = 10 kV/s TYP.) * High-speed response (tPHL = 30 ns TYP., tPLH = 35 ns TYP.) * Pulse width distortion (tPHL - tPLH = 5 ns TYP.) * Totem pole output (No pull-up resistor required) * Ordering number of tape product: PS9611L-E3, E4: 1 000 pcs/reel * Safety standards * UL approved: File No. E72422 (S) * VDE0884 approved (Option) : No.91877
APPLICATIONS
* Computer and peripheral manufactures * Measurement equipment * PDP
Document No. PN10072EJ02V0DS (2nd edition) Date Published February 2003 CP(K)
The mark
shows major revised points.
PS9611,PS9611L
PACKAGE DIMENSIONS (UNIT: mm) DIP Type
PS9611
9.250.25
8 7
TOP VIEW
6 5
1
2
3
7.62
4
1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC
6.50.5
2.8 MIN. 4.150.3
0.65
3.50.3
0.880.1
0.50.1
0 to 15
0.25 M
2.54
0.840.43
1.250.15
Lead Bending Type
PS9611L
9.250.25
TOP VIEW
8 7 6 5
1
2
3
4
1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC
6.50.5
3.50.3
0.25 +0.1 -0.05
0.880.1
0.90.25 9.600.4
1.250.15 0.25 M
2.54
2
Data Sheet PN10072EJ02V0DS
0.1 +0.1 -0.05
PS9611,PS9611L
INTERNAL OUTPUT CIRCUIT
VCC (8)
Vo (6)
GND (5) LED ON OFF Output L H
MARKING EXAMPLE
No. 1 pin Mark
PS9611 M003
Country Assembled Type Number Assembly Lot
M 0 03
Week Assembled Year Assembled (Last 1 Digit) Rank Code
Data Sheet PN10072EJ02V0DS
3
PS9611,PS9611L
ORDERING INFORMATION (Solder Contains Lead)
Part Number PS9611 PS9611L PS9611L-E3 PS9611L-E4 PS9611-V PS9611L-V PS9611L-V-E3 PS9611L-V-E4 Embossed Tape 1 000 pcs/reel Magazine case 50 pcs VDE0884 approved (Option) PS9611 PS9611L Embossed Tape 1 000 pcs/reel Package 8-pin DIP Packing Style Magazine case 50 pcs Safety Standards Approval Approved products other than VDE Application Part *1 Number PS9611 PS9611L
*1 For the application of the Safety Standard, following part number should be used.
ORDERING INFORMATION (Pb-Free)
Part Number PS9611-A PS9611L-A PS9611L-E3-A PS9611L-E4-A PS9611-V-A PS9611L-V-A PS9611L-V-E3-A PS9611L-V-E4-A Embossed Tape 1 000 pcs/reel Magazine case 50 pcs VDE0884 approved (Option) PS9611 PS9611L Embossed Tape 1 000 pcs/reel Package 8-pin DIP Packing Style Magazine case 50 pcs Safety Standards Approval Approved products other than VDE Application Part *1 Number PS9611 PS9611L
*1 For the application of the Safety Standard, following part number should be used.
4
Data Sheet PN10072EJ02V0DS
PS9611,PS9611L
ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified)
Parameter Diode Forward Current Reverse Voltage
Detector
Symbol IF VR VCC VO
*1 *1
Ratings 30 3.0 7 7 -5 25 150 3 750 -40 to +85 -55 to +125
Unit mA V V V mA mA mW Vr.m.s. C C
Supply Voltage Output Voltage High Level Output Current
IOH IOL PC BV TA Tstg
Low Level Output Current Power Dissipation Isolation Voltage
*3 *1, 2
Operating Ambient Temperature Storage Temperature
*1 TA = -40 to +85C *2 Applies to output pin VO and power supply pin VCC. *3 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output.
RECOMMENDED OPERATING CONDITIONS
Parameter High Level Input Current Low Level Input Current Supply Voltage TTL (loads) Symbol IFH IFL VCC N MIN. 7.5 0 4.5 5.0 TYP. MAX. 12.5 250 5.5 5 Unit mA
A
V
Data Sheet PN10072EJ02V0DS
5
PS9611,PS9611L
ELECTRICAL CHARACTERISTICS (TA = -40 to +85C, unless otherwise specified)
Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Detector High Level Output Current High Level Output Voltage Low Level Output Voltage High Level Supply Current Low Level Supply Current High Level Output Short Circuit Current Low Level Output Short Circuit Current Coupled Threshold Input Current (H L) Threshold Input Current (L H) Isolation Resistance RI-O VI-O = 1 kVDC, RH = 40 to 60%, TA = 25C Isolation Capacitance Propagation Delay Time (H L)
*2
Symbol VF IR Ct IOH VOH VOL ICCH ICCL IOSH
Conditions IF = 10 mA, TA = 25C VR = 3 V, TA = 25C V = 0 V, f = 1 MHz, TA = 25C VCC = VO = 5.5 V, IF = 250 A VCC = 4.5 V, IF = 250 A, IOH = -2 mA VCC = 4.5 V, IF = 7 mA, IOL = 8 mA VCC = 5.5 V, IF = 0 mA VCC = 5.5 V, IF = 10 mA VCC = 5.5 V, VO = GND, IF = 0 mA, 10 ms or less
MIN. 1.4
TYP.
*1
MAX. 1.9 10
Unit V
1.65
A
pF
30 1 2.4 3.0 0.38 11 12 -26 0.6 17 18 200
A
V V mA mA mA
IOSL
VCC = VO = 5.5 V, IF = 8 mA, 10 ms or less
34
mA
IFHL
VCC = 5 V
TA = 25C
2.7
5 6
mA
IFLH
VCC = 5 V
TA = 25C
0.5 0.35 10
11
mA
CI-O tPHL
V = 0 V, f = 1 MHz, TA = 25C TA = 25C VCC = 5 V, IF = 7.5 mA 15 10 15 10
0.9 30 65 85 35 65 85 5 35
pF ns
Propagation Delay Time (L H)
*2
tPLH
TA = 25C VCC = 5 V, IF = 7.5 mA
ns
Pulse Width Distortion (PWD)
*2
tPHL-tPLH VCC = 5 V, IF = 7.5 mA
ns
Common Mode Transient Immunity at High Level Output
*3
CMH
VCC = 5 V, TA = 25C, IF = 0 mA, VO (MIN.) = 2 V, VCM = 100 V
1
10
kV/s
Common Mode Transient Immunity at Low Level Output
*3
CML
VCC = 5 V, TA = 25C, IF = 7.5 mA, VO (MAX.) = 0.8 V, VCM = 100 V
1
10
kV/s
6
Data Sheet PN10072EJ02V0DS
PS9611,PS9611L
*1 Typical values at TA = 25C *2 Test circuit for propagation delay time
VCC = 5 V VO (monitor) Pulse input (IF) (PW = 500 ns, Duty cycle = 1/2) Input (monitor) CL = 15 pF 47 GND VCC 0.1 F CL = 30 pF VCC = 5 V 1.3 k
Input
IF (ON) 50% IF (ON)
VOH
2.5 k
Output 1.5 V VOL
tPHL
tPLH
CL includes probe and stray wiring capacitance.
*3 Test circuit for common mode transient immunity
VCC = 5 V SW IF VCC 0.1 F VO (monitor) CL = 15 pF GND
VCM 90% 10%
tr
tf
1 kV 0V
VO (IF = 0 mA) VO (IF = 7.5 mA)
VOH 2V 0.8 V VOL
CL includes probe and stray wiring capacitance.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of more than 0.1 F is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity.
Data Sheet PN10072EJ02V0DS
7
PS9611,PS9611L
TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE
40
Detector Power Dissipation PC (mW) Maximum Forward Current IF (mA)
DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE
200
30
150
20
100
10
50
0
20
40
60
80 85
100
0
20
40
60
80 85
100
Ambient Temperature TA (C)
Ambient Temperature TA (C)
FORWARD CURRENT vs. FORWARD VOLTAGE
100
High Level Supply Current ICCH (mA), Low Level Supply Current ICCL (mA)
SUPPLY CURRENT vs. AMBIENT TEMPERATURE
20 18 16 14 12 10 8 6 4 2 0 -50 -25 0 25 50 75 100
ICCH
Forward Current IF (mA)
VCC = 5.5 V, ICCH : IF = 0 mA, ICCL : IF = 10 mA ICCL
10
TA = +85C +50C +25C 0C -25C
1
0.1
0.01 1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
Forward Voltage VF (V)
Ambient Temperature TA (C)
HIGH LEVEL OUTPUT VOLTAGE vs. HIGH LEVEL OUTPUT CURRENT
5
High Level Output Voltage VOH (V) High Level Output Voltage VOH (V)
HIGH LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE
5
VCC = 4.5 V, IF = 250 A, IOH = -2 mA
VCC = 4.5 V, IF = 250 A
4
TA = +85C +25C -40C
4
3
3
2
2
1
1
0
-1
-2
-3
-4
-5
-6
0 -50
-25
0
25
50
75
100
High Level Output Current IOH (mA)
Ambient Temperature TA (C)
8
Data Sheet PN10072EJ02V0DS
PS9611,PS9611L
LOW LEVEL OUTPUT VOLTAGE vs. LOW LEVEL OUTPUT CURRENT
3
LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE
1.0
Low Level Output Voltage VOL (V)
Low Level Output Voltage VOL (V)
VCC = 4.5 V, IF = 7 mA
0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 -50 -25 0
VCC = 4.5 V, IF = 7 mA, IO = 8mA
2 TA = +85C +25C -40C 1
0
5
10
15
20
25
30
25
50
75
100
Low Level Output Current IOL (mA)
Ambient Temperature TA (C)
PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. FORWARD CURRENT
Propagation Delay Time tPHL, tPLH (ns), Pulse Width Distortion tPHL - tPLH (ns) Propagation Delay Time tPHL, tPLH (ns), Pulse Width Distortion tPHL - tPLH (ns)
60 50 40
tPLH
PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE
70 60 50 40 30
tPLH tPHL VCC = 5 V, IF = 7.5 mA
VCC = 5 V
30 20 10 0 -10 -20 0 5 10 15 20 25
PWD tPHL
20 10 0 -50 -25 0 25 50
PWD
75
100
Forward Current IF (mA)
Ambient Temperature TA (C)
THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE
Threshold Input Current IFHL, IFLH (mA)
10 9 8 7 6 5 4 3 2 1 0 -50 -25 0 25 50 75 100
IFHL IFLH VCC = 5 V
Ambient Temperature TA (C)
Remark The graphs indicate nominal characteristics.
Data Sheet PN10072EJ02V0DS
9
PS9611,PS9611L
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Tape)
2.00.1 4.00.1
1.750.1
1.5 +0.1 -0
4.5 MAX.
16.00.3
7.50.1
10.30.1
1.550.1
12.00.1
10.40.1
0.3
4.00.1
Tape Direction
PS9611L-E3 PS9611L-E4
Outline and Dimensions (Reel)
2.00.5
2.00.5 13.00.2
3302.0
R 1.0
21.00.8
1001.0
17.51.0
21.51.0
Packing: 1 000 pcs/reel
15.9 to 19.4 Outer edge of flange
10
Data Sheet PN10072EJ02V0DS
PS9611,PS9611L
NOTES ON HANDLING 1. Recommended soldering conditions
(1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
Package Surface Temperature T (C)
(heating) to 10 s
260C MAX. 220C
to 60 s
180C
120C
12030 s (preheating)
Time (s)
(2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings.
Data Sheet PN10072EJ02V0DS
11
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of PS9611

	To Download PS9611 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .