 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Back Subminiature Basic Switch Economical, Subminiature Basic Switch Offers Long Life (30 x 106 Operations) Incorporating simple and stable two split springs which ensures a long service life (30,000,000 operations). A variety of models with low operating force to high operating force are available. Solder, quick-connect (#110) and PCB terminals are available. Models with a switching current of 10.1 A incorporate special contacts made of silver alloy that are tough and highly conductive. SS RC 221 S+E Ordering Information Consult OMRON for standard approvals of models. Rating Actuator OF max. 25 g 50 g 150 g 8g 16 g 50 g S u a ed Simulated hinge lever ge e e 8g 16 g 50 g Hinge roller lever ge o e e e 8g 16 g 50 g 5 A (standard (s a da d rivet contact) it t t) Pin p u ge plunger Hinge lever ge e e Simulated hinge lever 50 g 150 g 16 g 50 g 16 g 50 g Hinge roller lever 16 g 50 g 10.1 A (standard rivet contact) Pin plunger Hinge lever Simulated hinge lever Hinge roller lever 150 g 50 g 50 g 50 g Soldering terminal SS-01-E SS-01-F SS-01 SS-01GL-E SS-01GL-F SS-01GL SS-01GL13-E SS-01GL13-F SS-01GL13 SS-01GL2-E SS-01GL2-F SS-01GL2 SS-5-F (see note) SS-5 (see note) SS-5GL-F (see note) SS-5GL (see note) SS-5GL13-F (see note) SS-5GL13 (see note) SS-5GL2-F (see note) SS-5GL2 (see note) SS-10 (see note) SS-10GL (see note) SS-10GL13 (see note) SS-10GL2 (see note) Quick-connect terminal (#110) SS-01-ET SS-01-FT SS-01-T SS-01GL-ET SS-01GL-FT SS-01GLT SS-01GL13-ET SS-01GL13-FT SS-01GL13T SS-01GL2-ET SS-01GL2-FT SS-01GL2T SS-5-FT SS-5T SS-5GL-FT SS-5GLT SS-5GL13-FT SS-5GL13T SS-5GL2-FT SS-5GL2T SS-10T SS-10GLT SS-10GL13T SS-10GL2T PCB terminal SS-01-ED SS-01-FD SS-01D SS-01GL-ED SS-01GL-FD SS-01GLD SS-01GL13-ED SS-01GK13-FD SS-01GL13D SS-01GL2-ED SS-01GL2-FD SS-01GL2D SS-5-FD (see note) SS-5D (see note) SS-5GL-FD (see note) SS-5GLD (see note) SS-5GL13-FD (see note) SS-5GL13D (see note) SS-5GL2-FD (see note) SS-5GL2D (see note) SS-10D (see note) SS-10GLD (see note) SS-10GL13D (see note) SS-10GL2D (see note) 0 0.1 A (b u ca ed Pin plunger (bifurcated p u ge crossbar b contacts for microvoltage/cur rent load) Hinge lever ge e e Note: EN61058-1 (IEC1058-1) approved by TUV Rheinland. 89 SS Model Number Legend SS-jjjj 1 2 3 4 SS 1. Ratings 01: 0.1 A 5: 5 A 10: 10 A Actuator None: Pin plunger GL: Hinge lever GL13: Simulated hinge lever GL2: Hinge roller lever 3. OF Max. (at Pin Plunger) None: 150 gf -F: 50 gf -E: 25 gf Terminals None: Solder T: Quick-connect (#110) D: PCB 2. 4. Specifications Ratings Type Rated voltage Non-inductive load Resistive load NC Ge e a Generalpurpose 125 VAC 250 VAC 8 VDC 14 VDC 30 VDC 125 VDC 250 VDC Note: 2. 3. 4. 5. 5 (10.1) A 3 (10.1) A 5 (10.1) A 5 (10.1) A 4A 0.4 A 0.2 A NO Lamp load NC 1.5 A 1A 2A 2A 2A 0.05 A 0.03 A NO 0.7 A 0.5 A SS-10, SS-5 Inductive load Inductive load NC 3A 2A 5A 4A 3A 0.4 A 0.2 A 4A 4A 3A 0.4 A 0.2 A NO Motor load NC 2.5 A 1.5 A 3A 3A 3A 0.05 A 0.03 A NO 1.3 A 0.8 A ------0.1 A ----SS-01 Non-inductive load Resistive load NC 0.1 A NO 1. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC). Lamp load has an inrush current of 10 times the steady-state current. Motor load has an inrush current of 6 times the steady-state current. Data in parentheses apply to the SS-10 series only. If the switch is used in a DC circuit and is subjected to a surge, connect a surge suppressor across the switch. Contact Form The normally open (SPST-NO) and normally closed (SPST-NC) types are not listed under Ordering Information. Consult OMRON directly. SPDT SPST-NC SPST-NO COM NO NC COM NC COM NO Approved Standards UL (File No. E32667)/CSA (File No. LR21642) SS-10 series: 10.1 A at 250 VAC SS-5 series: 5 A at 125 VAC, 3 A at 250 VAC SS-01 series: 0.1 A at 125 VAC, 0.1 A at 30 VDC SEMKO (File No. 8614026)/VDE (File No. 221) SS-5 series: 5 A at 250 VAC SEMKO (File No. 8916091)/VDE (File No. 221) SS-10 series: 10 A at 250 VAC SEV (File No. 93, 5, 51936, 01) SS-5 series: 5 A at 250 VAC EN61058-1 (IEC1058-1) (TUV Rheinland, File No. T9451450) SS-5: 5 A at 250 VAC, 5(1) A at 250 VAC SS-10: 10 A at 250 VAC 90 SS Characteristics Operating speed Operating frequency Insulation resistance Contact resistance (initial value) 0.1 mm to 1 m/s (at pin plunger) Mechanical: 400 operations/min Electrical: 60 operations/min 100 M min. (at 500 VDC) OF 150 gf: SS-01 series: 50 m max. SS-5, SS-10 series: 30 m max. OF 50 gf: OF 25 gf: Inrush current Dielectric strength SS-01 series: 100 m max. SS-5 series: 50 m max. SS-01 series: 150 m max. SS NC: 20 A max. for SS-10 and SS-5, 1 A max. for SS-01 NO: 15 A max. for SS-10, 10 A max. for SS-5, 1 A max. for SS-01 1,000 VAC (600 VAC for crossbar contact model), 50/60 Hz for 1 min between the same polarities 1,500 VAC, 50/60 Hz for 1 min between current-carrying metal part and ground, and between each terminal and non-current-carrying metal part Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Mechanical: OF 150 gf: OF 25/50 gf: Malfunction: OF 150 gf: OF 25/50 gf: Note: 1,000 m/s2 (approx. 100G min.) 500 m/s2 (approx. 50G min.) 300 m/s2 (approx. 30G min.) 200 m/s2 min. (approx. 20G min.) Vibration resistance Shock resistance Lever-type model: Operating limit position (with a contact separation time of 1 ms max.) Life expectancy Mechanical: 30,000,000 operations min. (OT: rated value) 10,000,000 operations min. for SS-10 series Electrical: 200,000 operations min. (OT: full) 50,000 operations min. for SS-10 series Operating: -25C to 85C (with no icing) Operating: 85% max. Type: Rivet for SS-10 and SS-5, crossbar for SS-01 Material: Silver alloy for SS-10, silver for SS-5, PGS alloy for SS-01 Approx. 1.6 g (pin plunger) Ambient temperature Ambient humidity Contact Weight Characteristics Approved by TUV Rheinland for EN61058-1 Enclosure rating Degree of protection against electrical shock Ambient temperature Operating cycles Proof Tracking Index (PTI) Switch category IP00 Class 1 0C to 85C (with no icing) 50,000 175 V D Operating Characteristics Model OF max. RF min. PT max. OT min. MD max. OP Model OF max. RF min. OT min. MD max. FP max. OP Note: SS-01-E 0.25 N (25 gf) 0.02 N (2 gf) 0.5 mm 0.5 mm 0.1 mm 8.40.5 mm SS-01GL-E 0.08 N (8 gf) (0.01 N (1 gf)) 1.2 mm 0.8 mm 13.6 mm 8.80.8 mm Values in brackets are possible when the switch is mounted so that the weight of the lever will not be imposed on the plunger. SS-01GL-F, SS-5GL-F 0.16 N (16 gf) 0.02 N (2 gf) 1.2 mm 0.8 mm SS-01GL, SS-5GL 0.49 N (50 gf) 0.06 N (6 gf) 1.2 mm 0.8 mm SS-10GL 0.49 N (50 gf) 0.06 N (6 gf) 1.0 mm 1.0 mm SS-01-F, SS-5-F 0.49 N (50 gf) 0.04 N (4 gf) 0.5 mm 0.5 mm 0.1 mm SS-01, SS-5 1.47 N (150 gf) 0.25 N (25 gf) 0.5 mm 0.5 mm 0.1 mm SS-10 1.47 N (150 gf) 0.25 N (25 gf) 0.6 mm 0.4 mm 0.12 mm 91 SS Model OF max. RF min. OT min. MD max. FP max. OP Model OF max. RF min. OT min. MD max. FP max. OP Note: SS-01GL13-E 0.08 N (8 gf) (0.01 N (1 gf)) 1.2 mm 0.8 mm 15.5 mm 10.70.8 mm SS-01GL2-E 0.08 N (8 gf) (0.01 N (1 gf)) 1.2 mm 0.8 mm 19.3 mm 14.50.8 mm Values in brackets are possible when the switch is mounted so that the weight of the lever will not be imposed on the plunger. SS-01GL2-F, SS-5GL2-F 0.16 N (16 gf) 0.02 N (2 gf) 1.2 mm 0.8 mm SS-01GL2, SS-5GL2 0.49 N (50 gf) 0.06 N (6 gf) 1.2 mm 0.8 mm SS-10GL2 0.49 N (50 gf) 0.06 N (6 gf) 1.0 mm 1.0 mm SS-01GL13-F, SS-5GL13-F 0.16 N (16 gf) 0.02 N (2 gf) 1.2 mm 0.8 mm SS-01GL13, SS-5GL13 0.49 N (50 gf) 0.06 N (6 gf) 1.2 mm 0.8 mm SS-10GL13 0.49 N (50 gf) 0.06 N (6 gf) 1.0 mm 1.0 mm SS Engineering Data Mechanical Life Expectancy SS-5, SS-01 Series Number of operations (x10 3) Without load Operating frequency: 60 operations/min 40,000 Electrical Life Expectancy SS-5 Series 5,000 Number of operations (x10 3) Operating frequency: 30 operations/min cos = 1 3,000 30,000 1,000 500 300 100 50 30 10 250 VAC 125 VAC 20,000 10,000 5,000 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 1 2 3 4 5 6 7 Overtravel (mm) Switching current (A) 92 SS SS Dimensions Note: 1. All units are in millimeters unless otherwise indicated. 2. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. 3. The following illustration and drawing are for solder terminal models. Refer to page 94 for details on models with quick-connect terminals (#110) or PCB terminals. Pin Plunger SS-01(-E, -F) SS-5(-F) SS-10 6.4 PT 2 OP 2.9 2.35 -0.05 2.5 +0.075 7.5 3.2 9.5 10.2 6.4 2.35 +0.075 dia. holes -0.05 8.8 7.3 5.1 9.50.1 19.8 14.5 (see note 2) 3.2 6.4 Three, 1.6 dia. 2.50.07 dia. 1.6 Hinge Lever SS-01GL(-E, -F) SS-5GL(-F) SS-10GL 2.9 t = 0.3 (see note 1) 2.35 -0.05 2.5 2.50.07 dia. +0.075 4 OP 9.5 10.2 FP 6.4 +0.075 2.35 -0.05 dia. holes 8.8 7.3 5.1 9.50.1 19.8 Note: 1. Stainless steel lever 3.2 6.4 Three, 1.6 dia. 2. Besides the SS-jGL-series models with a hinge lever length of 14.5, the SS-jGL11-series models with a hinge lever length of 18.5, the SS-jGL111-series models with a hinge lever length of 22.6, and the SS-jGL1111-series models with a hinge lever length of 37.8 are available. Contact your OMRON representative for these models Simulated Hinge Lever SS-01GL13(-E, -F) SS-5GL13(-F) SS-10GL13 2.9 2.5 t = 0.3 (see note) 15.8 1.3R 4 2.35 +0.075 -0.05 OP 9.5 10.2 FP 6.4 2.35 -0.05 dia. holes 8.8 5.1 9.50.1 19.8 7.3 +0.075 2.50.07 dia. 3.2 6.4 Three, 1.6 dia. Note: Stainless steel spring lever Hinge Lever SS-01GL2(-E, -F) SS-5GL2(-F) SS-10GL2 t = 0.3 (see note 1) 14.5 4.8 x 3.2 dia. (see note 2) OP 2.35 -0.05 dia. 2.9 2.5 2.50.07 dia. 1.6 8.8 5.1 9.50.1 19.8 7.3 +0.075 FP 9.5 10.2 6.4 2.35 -0.05 dia. holes +0.075 3.2 6.4 Three, 1.6 dia. Note: 1. Stainless steel spring lever 2. Polyacetal resin roller 93 SS Terminals Solder Terminal Quick-connect Terminal (#110) SS 2.9 3.2 8.8 COM terminal 9.50.1 19.8 NO terminal NC terminal 6.4 7.3 6.4 2.9 7.1 10.6 1.6 1.6 Three, 1.6 dia. holes COM terminal 8.8 9.50.1 19.8 NO terminal NC terminal 7.3 3.2 2.8 Three, 1.2 dia. PCB Terminal PCB Mounting Dimensions (Reference) 5.25 9.50.1 3.25 7.0 2.9 1.6 8.8 COM terminal 9.50.1 19.8 NO terminal 7.3 3.3 0.5 0.6 1.2 3.2 t = 0.5 Three, 1.35 to 1.5 dia. NC terminal (1.6) +0.15 8.8 -0.05 16.10.1 Precautions Mounting Use two M2.3 mounting screws with spring washers to mount the switch. Tighten the screws to a torque of 0.23 to 0.27 N S m (2.3 to 2.7 kgf S cm). Mounting Holes Two, 2.4 dia. mounting holes or M2.3 screw holes Spacing Switch does not have a ground terminal. The minimum thickness of insulation according to IEC1058-1 is 1.1 mm, and the minimum clearance between live terminals and mounting plate is 1.6 mm. If the proper insulation for the terminator cannot be obtained, add insulation such as a separator or insulation cover on the switch. Soldering When soldering switch terminals, apply a soldering iron rated at 60 W max. and finish soldering quickly within 5 seconds. During soldering and 1 minute after soldering, do not apply external force to the terminals. Solder terminals are provided with a hole for the mechanical mounting of a conductor. Conductors for the soldering terminal should be flexible and its cross-section should be 0.5 to 0.75 mm2 for the SS-5 series and 0.75 mm2 for the SS-10 series. 9.5 0.1 Actuating For the secure operation, 60% to 90% of rated overtravel should be maintained. Others If a surge current or inrush current is involved in a DC circuit, it is recommended to use a cancellation circuit. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. B14-E1-6 94 |
Price & Availability of SS5
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |