View HEX-AW-DRLC-A_455848.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Bussmann(R)
TRON(R) In-Line Fuseholders
Double-Pole for Class CC and TM 1TM Fuses
Catalog and Specification Data
Conductor Terminals Conductor Data Size
HEX & HEY Series
HEX Series Catalog Symbol: HEX-AA(1) (2), HEX-AB, HEX-AC, HEX-AD, HEX-AE, HEX-AY, HEX-BB, HEX-CC, HEX-JJ, HEX-JK, and HEX-KK. In-Line Fuseholders, Double Pole Water-Resistant For breakaway holders, see page 2 Agency Information: (1)UL Recognized, Guide IZLT2, File E14853 (2)CSA Certified, Class 6225-01, File 47235 HEX -- For any TM 1TM fuse. Fuseholder rated 30A, 600V (CSA Listed 15A max.). Typical fuse types: BAF, FNM, FNQ, and KTK ( - 30A).
Copper Crimp
#12 to #8 #12 #10 #6 #4 #8 #4 #6 #2 #4
1 2 2 1 1 2 1 2 1 2
* * * * * * -- * -- *
Stranded * * * * * * * * * *
No. Per Terminal
Terminal Type
Catalog Symbol
Solid
A B C D E
Copper Set-Screw
#12 to #3
1
*
*
J
#12 to #3
2
*
*
K
Aluminum Set-Screw #12 to #2 1 * * L
#12 to #2
2
*
*
Y
HEY Series Catalog Symbol: HEY-AA, HEY-AB, HEY-AC, HEY-AD, HEY-AE, HEY-AL, HEY-BB, and HEY-JJ. In-Line Fuseholders, Double-Pole Water-Resistant For breakaway holders, see page 2 HEY -- Optional breakaway receptacle, water-resistant, polarized, and accepting Class CC branch circuit fuses (Buss Type KTK-R, FNQ-R, & LP-CC; 600V or less, 200,000A interrupting rating.) Particularly applicable in street lighting circuits. Example: A double-pole, in-line holder for Class CC fuses. A single #12 stranded copper wire, copper crimp, on the load side. A single #4 stranded, copper wire, copper crimp on the line side. Insulating boots are required. 1. Choose HEY- Series. 2. Choose "A" for load side. 3. Choose "C" for line side. 4. Choose 2A0660 insulating boots from page 2. Complete Catalog Number: HEY-AC, 2A0660; 4 insulating boots required per holder
Catalog Data -- Insulating Boots
Catalog Numbers 2A0660 2A0661 Type Single Conductor Two Conductor
General Information: * Insulating boots are not included with non-breakaway parts and must be ordered separately. They come standard with the breakaway series. The HEX-AW does not have the boots. This catalog item does not have a breakaway receptacle. * When boots are utilized, extra heat retention requires that fuses are sized at a minimum of 200% of the RMS load current. Ordering Information:
HEX HEY Load Terminal Line Terminal
Recommended Torque on Coupling Nut: 10-20 in-lb.
7-16-03
N03082
Form No. HEX & HEY Series Page 1 of 2 Data Sheet: 2126
Bussmann(R)
TRON(R) In-Line Fuseholders
Double-Pole for Class CC and TM 1TM Fuses
Breakaway Holders HEX Series Catalog Symbol: HEX-AW, HEX-AW-DRLC-A, HEX-AW-DRYC, and HEX-JW-DRYC. HEY Series Catalog Symbol: HEY-AW-DRLC-A, HEY-AW-DRYC, and HEY-AW-DRLC-B. In-Line Fuseholders, Double Pole Example: A double-pole, in-line, breakaway holder for TM 1TM fuses, a single #12 solid copper wire, copper crimp, on the load side. A single #10 stranded copper wire, copper crimp on the line side. Insulating boots are required. 1. Choose HEY- Series. 2. Choose "A" from 1st page for load side. 3. Choose "W" for breakaway requirement. 4. Choose "DRLC-A" for two-pole breakaway receptacle on line side. Complete Catalog Number: HEY-AW-DRLC-A Insulating boots come with this catalog number.
#12 to #3
HEX & HEY Series
Catalog and Specification Data
Breakaway Receptacles Stranded *No. Per Terminal Conductor Data Size Terminal Type Solid Catalog Symbol *Double Pole -DRLC-A -DRLC-B
Copper Crimp
#12 to #8 #6
1 1
* *
* *
Copper Set-Screw
#12 to #3
1
*
*
-DRLC-J
2
*
*
-DRYC
*Terminal illustration shows the end views of single-pole receptacle and one pole only of the double pole receptacles. Thus, for example, in the case of a double-pole, set-screw type receptacle with terminals that accept two conductors, a total of four conductors could be connected to the receptacle.
Ordering Information:
HEX HEY Load Terminal W Line Terminal
Recommended Torque on Coupling Nut: 10-20 in-lb.
The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
7-16-03
N03082
Form No. HEX & HEY Series Page 2 of 2 Data Sheet: 2126

▲Up To Search▲

Price & Availability of HEX-AW-DRLC-A

	To Download HEX-AW-DRLC-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .