View MAX2560_426979.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

19-3368; Rev 0; 7/04
www..com
MAX2560/MAX2566/MAX2572 Evaluation Kits
General Description Features
On-Board PCS and Cellular VCOs WCDMA, GSM900, DCS1800, GSM1900 Modes (MAX2566/MAX2572 EV Kits) 50 SMA Connectors on All RF and Baseband Ports Low-Power Shutdown Mode EV-Kit Control Software Available at www.maxim-ic.com SPITM/QSPITM/MICROWIRETM Compatible
Evaluate: MAX2560/MAX2566/MAX2572
The MAX2560/MAX2566/MAX2572 evaluation kits (EV kits) simplify testing of the MAX2560/MAX2566/ MAX2572. The EV kits provide 50 SMA connectors for all RF inputs, baseband inputs, and RF outputs. Onboard VCOs are provided for the on-chip PLLs. The EV kits allow evaluation of the MAX2560/MAX2566/ MAX2572s' I/Q modulator, RF upconverter, IF and RF VGAs, IF and RF PLLs, 3-wire programmable interface, and power-management features. The MAX2560/MAX2566/MAX2572 support CDMA, TDMA, and EDGE modes for US PCS and cellular bands, as well as W-CDMA mode for UMTS band. The MAX2566/MAX2572 also support GSM-GPRS mode for all four bands.
Ordering Information
PART MAX2560EVKIT MAX2566EVKIT MAX2572EVKIT TEMP RANGE -40C to +85C -40C to +85C -40C to +85C IC PACKAGE 48 QFN-EP* 48 QFN-EP* 48 QFN-EP*
*EP = Exposed paddle.
Component Suppliers
SUPPLIER AVX Coilcraft Murata Taiyo Yuden TOKO PHONE 803-946-0690 847-639-6400 770-436-1300 408-573-4150 708-297-0070 FAX 803-626-3123 847-639-1469 770-436-3030 408-573-4159 708-699-1194 WEBSITE www.avxcorp.com www.coilcraft.com www.murata.com www.t-yuden.com www.toko.com
Note: Indicate that you are using the MAX2560/MAX2566/MAX2572 when contacting these component suppliers.
MAX2560 Component List
DESIGNATION QTY C1 C2, C4, C39 C3, C7, C116 C5 1 3 3 1 DESCRIPTION 4.7pF 0.1pF ceramic capacitor (0402) Murata GRP1555C1H4R7B 33pF 5% ceramic capacitors (0402) Murata GRP1555C1H330J 10F 10% ceramic capacitors (1206) Murata GRM31CR60J106K 6.8pF 0.1pF capacitor (0402) Murata GRP1555C1H6R8B DESIGNATION QTY C6, C8, C9, C11, C12, C14, C15, C17, C18, C20, C27, C28, C29, C34, C35, C47, C48, C50, C51, C53, C54, C56, C58, C59, C64, C66, C93, C94, C102-C106, C112-C115 C10 C13, C16, C31, C32, C41, C42, C55 DESCRIPTION
37
Open
1
3.3F 10% ceramic capacitor (0805) Murata GRM21BR60J335K 0.022F 10% ceramic capacitors (0402) Murata GRP155R71C223K
7
SPI and QSPI are trademarks of Motorola, Inc. Microwire is a trademark of National Semiconductor Corp.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.
www..com MAX2560/MAX2566/MAX2572 Evaluation Kits
Evaluate: MAX2560/MAX2566/MAX2572
MAX2560 Component List (continued)
DESIGNATION QTY C21, C36, C37, C90, C100 C22, C23, C30, C43, C44, C45, C57, C82, C83, C84, C97, C98 C24 C25 C26 C33, C85, C110, C111 C38 C40, C67, C68, C69 C46, C60, C63 C49 C52 C61 C62 C65 C70, C73, C75 C72 C74, C88, C89 C76, C77, C101, C109 5 DESCRIPTION 1.0F 10% ceramic capacitors (1206) Murata GRM31MR71E105K 1000pF 10% ceramic capacitors (0402) Murata GRP155R71H102K 10pF 0.1pF ceramic capacitor (0402) Murata GRP1555C1H100B 22pF 5% ceramic capacitor (0402) Murata GRP1555C1H220J 4700pF 10% ceramic capacitor (0402) Murata GRP155R71E472K 100pF 5% ceramic capacitors (0402) Murata GRP1555C1H101J 0.1F 10% ceramic capacitor (0603) Murata GRM188R71E104K 15pF 5% ceramic capacitors (0402) Murata GRP1555C1H150J 0.01F 10% ceramic capacitors (0402) Murata GRP155R71E103K 0.015F 10% ceramic capacitor (0402) Murata GRP155R71C153K 0.33F 10% ceramic capacitor (1206) Murata GRM319R71H334K 220pF 10% ceramic capacitor (0402) Murata GRP155R71H221K 2200pF 10% ceramic capacitor (0402) Murata GRP155R71H222K 0.47F 10% ceramic capacitor (0402) Murata GRP155R60J474K 1.0F 10% tantalum capacitors A case AVX TAJA105K016 1.0F 10% ceramic capacitor (0402) Murata GRP155R60J105K 0.1F 10% ceramic capacitors (0805) Murata GRM21BR71H104K 0.01F 10% ceramic capacitors (0805) Murata GRM216R71H103K DESIGNATION QTY C86 C87 C91, C92, C95 1 1 1 4 1 4 3 1 1 1 1 1 3 1 3 4 C96, C99 J1, J2, J7-J11, J15, J16, J17, J59 J3, J6, J33 J4, J5, J18-J22, J31, JU6-JU10, JU12, JU14, JU16-JU23, JU28-JU31 J24 1 1 3 2 DESCRIPTION 47pF 5% ceramic capacitor (0402) Murata GRP1555C1H470J 39pF 5% (0402) ceramic capacitor Murata GRP1555C1H390J 56pF 5% ceramic capacitors (0402) Murata GRP1555C1H560J 22F 10% ceramic capacitors (1206) Murata GRM31CR60J226K SMA edge mount connectors--round contacts Johnson 142-0701-801 Open
12
11 3
27
1 x 2, 2-pin in-line headers, 100-mil centers Sullins PTC36SAAN
1
2 x 10, dual in-line header, 100-mil centers Sullins PTC36DAAN 1 x 5, 5-pin header, 100-mil centers Sullins PTC36SAAN 1 x 3, 3-pin in-line headers, 100-mil centers Sullins PTC36SAAN
JU24 JU1-JU5, JU11, JU13, JU15 JU25, JU26, JU27, JU32, JU33, JU34 J12, J13, J14, TP1, TP2, TP3, TP5, TP6, TP7 L1 L2
1
8
6
Open
9
Test points Keystone 5000 3.9nH 0.3nH inductor (0402) Murata LQG15HN3N9S00 3.3nH 0.3nH inductor (0402) Murata LQG15HN3N3S00
1 1
2
_______________________________________________________________________________________
www..com
MAX2560/MAX2566/MAX2572 Evaluation Kits Evaluate: MAX2560/MAX2566/MAX2572
MAX2560 Component List (continued)
DESIGNATION QTY L3, L4, L12, L13, L14 L7, L8 L9, L10 L15 L16, L17 L18 L19 R1, R2, R3, R5, R7, R10-R13, R18, R20, R23, R25, R27, R28, R38, R46, R48, R49, R51-R54, R56, R57, R59 R4, R8, R9 R6 R14 R15, R16, R17, R22, R26, R55, R70, R76-R79 R19 R21 R24 R39 R40, R45, R96, R97, R98, R104, R107 R47 5 2 2 1 2 1 1 Open
DESCRIPTION
DESIGNATION QTY R50 R58 R61, R63-R68 R62 R99, R100, R101, R102 R103, R108 R105, R106 R109, R110 T3 T5, T6 U1 U2 U4 U5 1 1 7 1 4 2 2 2 1 2 1 1 1 1 1 3 1 2 1 1 1 1 1 1
DESCRIPTION 200 5% resistor (0402) 7.5k 5% resistor (0402) 5.1k 5% resistors (0402) 51 5% resistor (0402) 511 1% resistors (0402) 3.16k 1% resistors (0402) 22.1 1% resistors (0402) 1.2k 5% resistors (0402) Open Balun transformers B5F TOKO 458DB-1011 MAX2560 48-pin QFN MAX2560EGM Open Open Open Open SOT23 SOT23-5L MAX8867EUK28 VCO Fujitsu VC-2R8A50-2139 Low-voltage precision op amps MAX412CSA 19.2MHz VC TCXO Kinseki VC-TCXO-208C-19P2 36in socket connector ribbon cable--20 contacts INTF2300 interface board MAX2562/MAX2566/MAX2572 EV kit circuit board rev 3 MAX2560/MAX2566/MAX2572 data sheet MAX2560/MAX2566/MAX2572 EV kit data sheet
15nH 3% inductors (0402) Murata LQW15AN15NH00 8.2nH 5% inductors (0402) Coilcraft 0402CS-8N2XJB 33nH 5% inductor (0402) Murata LQG15HN33NJ00 12nH 2% inductors (0402) Murata LQP15MN12NG02 22nH 5% inductor (0402) Murata LQG15HN22NJ00 27nH 5% inductor (0402) Murata LQG15HN27NJ00
26
Open
U6 U7, U8, U9
3 1 1 11 1 1 1 1 7 1
3.3 5% resistors (0402) 10k 10% variable resistor Bournes 3296W-103 2.7k 5% resistor (0402)
U10 U11, U12 Y1
0 5% resistors (0402) None 20 1% resistor (0402) 6.8 5% resistor (0402) 100 5% resistor (0402) 13k 1% resistor (0402) None 1k 1% resistors (0402) None 220 5% resistor (0402) None None
_______________________________________________________________________________________
3
www..com MAX2560/MAX2566/MAX2572 Evaluation Kits
Evaluate: MAX2560/MAX2566/MAX2572
MAX2566 Component List
DESIGNATION C1 C2, C4, C39 C3, C7, C116 C5 C6, C91, C92 C8, C10, C11, C20, C27, C29, C34, C47, C48, C50, C51, C53-C59, C64, C93, C94, C95 C9, C13, C16, C17, C18, C22, C23, C30, C32, C43, C44, C45, C49, C82, C83, C84, C97, C98 C12 C14, C112-C115 C15, C62 C21, C36, C37, C90, C100 C24, C35 C25 C26, C55 C28 QTY 1 3 3 1 3 DESCRIPTION 4.7pF 0.1pF ceramic capacitor (0402) Murata GRP1555C1H4R7B 33pF 5% ceramic capacitors (0402) Murata GRP1555C1H330J 10F 10% ceramic capacitors (1206) Murata GRM31CR60J106K 6.8pF 0.1pF ceramic capacitor (0402) Murata GRP1555C1H6R8B 56pF 5% ceramic capacitors (0402) Murata GRP1555C1H560J DESIGNATION QTY C31 C33, C41, C42, C85, C105, C106, C110, C111 C38 C40, C67, C68, C69 C46, C60, C63 22 Open C52 C61 1000pF 10% ceramic capacitors (0402) Murata GRP155R71H102K 270pF 10% ceramic capacitor (0402) Murata GRP155R71H271K 680pF 10% ceramic capacitors (0402) Murata GRP155R71H681K 6800pF 10% ceramic capacitors (0402) Murata GRP155R71E682K 1.0F 10% ceramic capacitors (1206) Murata GRM31MR71E105K 10pF 0.1pF ceramic capacitors (0402) Murata GRP1555C1H100B 12pF 5% ceramic capacitor (0402) Murata GRP1555C1H120J 4700pF 10% ceramic capacitors (0402) Murata GRP155R71E472K 470pF 10% ceramic capacitor (0402) Murata GRP155R71H471K C65 C66 C70, C73, C75 C72 C74, C88, C89 C76, C77, C101, C109 C86, C87 C96, C99 C102 C103, C104 1 DESCRIPTION 0.022F 10% ceramic capacitor (0402) Murata GRP155R71C223K 100pF 5% ceramic capacitors (0402) Murata RP1555C1H101J 0.1F 10% ceramic capacitor (0603) Murata GRM188R71E104K 15pF 5% ceramic capacitors (0402) Murata GRP1555C1H150J 0.01F 10% ceramic capacitors (0402) Murata GRP155R71E103K 0.033F 5% film capacitor (1206) Panasonic ECHU1C333JX5 2200pF 10% ceramic capacitor (0402) Murata GRP155R71H222K 0.47F 10% ceramic capacitor (0402) Murata GRP155R60J474K 1.0pF 0.1pF ceramic capacitor (0402) Murata GRP1555C1H1R0B 1.0F 10% tantalum capacitors A Case AVX TAJA105K016 1.0F 10% ceramic capacitor (0402) Murata GRP155R60J105K 0.1F 10% ceramic capacitors (0805) Murata GRM21BR71H104K 0.01F 10% ceramic capacitors (0805) Murata GRM216R71H103K 8.0pF 0.1pF ceramic capacitors (0402) Murata GRP1555C1H8R0B 22F 10% ceramic capacitors (1206) Murata GRM31CR60J226K 27pF 5% ceramic capacitor (0402) Murata GRP1555C1H270J 2.2pF 0.1pF ceramic capacitors (0402) Murata GRP1555C1H2R2B
8
1 4 3 1 1 1 1 3 1 3 4 2 2 1 2
18
1 5 2 5 2 1 2 1
4
_______________________________________________________________________________________
www..com
MAX2560/MAX2566/MAX2572 Evaluation Kits
MAX2566 Component List (continued)
Evaluate: MAX2560/MAX2566/MAX2572
DESIGNATION QTY J1, J2, J3, J6-J11, J15, J16, J17, J33, J59
DESCRIPTION SMA edge-mount connectors--round contacts Johnson 142-0701-801 2 x 10, dual in-line header, 100-mil centers Sullins PTC36DAAN
DESIGNATION QTY L16 L17 L18 L19 1 1 1 1 2 2 3
DESCRIPTION 7.5nH 5% inductor (0402) Coilcraft 0402CS-7N5XJB 5.1nH 5% inductor (0402) Coilcraft 0402CS-5N1XJB 22nH 5% inductor (0402) Murata LQG15HN22NJ00 12nH 5% inductor (0402) Murata LQG15HN12NJ00 10k 10% variable resistors Bournes 3296W-1-103 150 5% resistors (0402) 3.3 5% resistors (0402)
14
J24 J4, J5, J18-J22, J31, JU6-JU10, JU12, JU14, JU16-JU23, JU28-JU31 JU24 JU1-JU5, JU11, JU13, JU15, JU25, JU26, JU27, JU32 JU33, JU34 J12, J13, J14, TP1, TP2, TP3, TP5, TP6, TP7 L1 L2 L3, L4 L7, L8 L9, L10, L13 L12 L14 L15
1
27
1 x 2, 2-pin in-line headers, 100-mil centers Sullins PTC36SAAN
R1, R6 R2, R3 R4, R8, R9 R5, R15, R16, R17, R19, R20, R23, R24, R25, R27, R28, R38, R46, R48, R49, R51-R57, R59 R7, R18, R22, R26, R76-R79 R10 R11 R13, R45, R96, R97, R98 R14 R21 R39 R40, R104, R107 R47 R50 R58 R61, R63-R68, R70 R62 R99, R100-R103, R108 R105, R106 R109, R110
1
1 x 5, 5-pin header, 100-mil centers Sullins PTC36SAAN 1 x 3, 3-pin in-line headers, 100-mil centers Sullins PTC36SAAN Open Test points Keystone 5000 3.3nH 0.2nH inductor (0402) Murata LQP15MN3N3C00 2.2nH 0.3nH inductor (0402) Murata LQG15HN2N2S00 100nH 5% inductors (0402) TOKO LLV1005-FBR10J 5.6nH 5% inductors (0402) Coilcraft 0402CS-5N6XJB 9nH 5% inductors (0402) Coilcraft 0402CS-9N0XJB 27pF 5% ceramic capacitor (0402) Murata GRP1555C1H270J 15nH 5% inductor (0402) Murata LQG15HN15NJ00 33nH 2% inductor (0402) Murata LQP15MN33NG00
23
Open
12
8 1 1 5 1 1 1 3 1 1 1 8 1 6 2 2
0 5% resistors (0402) 56 5% resistor (0402) 1M 5% resistor (0402) 100 1% resistors (0402) 2.7k 5% resistor (0402) 6.8 5% resistor (0402) 13k 1% resistor (0402) 1k 5% resistors (0402) 365 1% resistor (0402) 430 5% resistor (0402) 2.0k 5% resistor (0402) 5.1k 5% resistors (0402) 51 5% resistor (0402) 511 1% resistors (0402) 39 5% resistors (0402) 680 5% resistors (0402)
2 9
1 1 2 2 3 1 1 1
_______________________________________________________________________________________
5
www..com MAX2560/MAX2566/MAX2572 Evaluation Kits
Evaluate: MAX2560/MAX2566/MAX2572
MAX2566 Component List (continued)
DESIGNATION QTY T3, T5, T6 U1 U2 U4 U5 U6 U7, U8, U9 U10 U11, U12 3 1 1 1 1 1 3 1 2 DESCRIPTION Transformers B5F TOKO 458DB-1011 MAX2566 48-pin QFN MAX2566EGM GSM VCO Murata MQT1C1A897M Open Open Open SOT23 SOT23-5L MAX8867EUK28 Open Low-voltage, precision op amps MAX412CSA None 1 None 1 DESIGNATION QTY Y1 None None None 1 1 1 1 DESCRIPTION 13.0MHz VC TCXO Kinseki VC-TCXO-208C-13P0 36in socket connector ribbon cable--20 contacts INTF2300 interface board MAX2562/MAX2566/MAX2572 EV kit circuit board rev 3 MAX2560/MAX2566/MAX2572 data sheet MAX2560/MAX2566/MAX2572 EV kit data sheet
MAX2572 Component List
DESIGNATION QTY C1 C2, C4, C39 C3, C7, C116 C5 C6, C8, C91-C95 C9, C11, C13, C16, C17, C18, C22, C23, C30, C32, C43, C44, C45, C56-C59, C82, C83, C84, C97, C98 1 3 3 1 DESCRIPTION 4.7pF 0.1pF ceramic capacitor (0402) Murata GRP1555C1H4R7B 33pF 5% ceramic capacitors (0402) Murata GRP1555C1H330J 10F 10% ceramic capacitors (1206) Murata GRM31CR60J106K 6.8pF 0.1pF ceramic capacitor (0402) Murata GRP1555C1H6R8B 56pF 5% ceramic capacitors (0402) Murata GRP1555C1H560J DESIGNATION QTY C10, C20 C27, C34, C64 C12 C14, C48, C49, C50, C112-C115 C15, C62 C21, C36, C37, C90, C100 22 1000pF 10% ceramic capacitors (0402) Murata GRP155R71H102K C24, C35 C25 2 3 1 DESCRIPTION 3.3F 10% ceramic capacitors (0805) Murata GRM21BR60J335K Open 270pF 10% ceramic capacitor (0402) Murata GRP155R71H271K 680pF 10% ceramic capacitors (0402) Murata GRP155R71H681K 6800pF 10% ceramic capacitors (0402) Murata GRP155R71E682K 1.0F 10% ceramic capacitors (1206) Murata GRM31MR71E105K 10pF 0.1pF ceramic capacitors (0402) Murata GRP1555C1H100B 12pF 5% ceramic capacitor (0402) Murata GRP1555C1H120J
8
7
2 5 2 1
6
_______________________________________________________________________________________
www..com
MAX2560/MAX2566/MAX2572 Evaluation Kits
MAX2572 Component List (continued)
Evaluate: MAX2560/MAX2566/MAX2572
DESIGNATION QTY C26 C28, C29, C47 C31, C51 C33, C41, C42, C85, C105, C106, C110, C111 C38 C40, C67, C68, C69 C46, C60, C63 C52, C53 C54, C55 C61 C65 C66 C70, C73, C75 C72 C74, C88, C89 C76, C77, C101, C109 C86, C87 C96, C99 1 3 2
DESCRIPTION 4700pF 10% ceramic capacitor (0402) Murata GRP155R71E472K 470pF 10% ceramic capacitors (0402) Murata GRP155R71H471K 0.022F 10% ceramic capacitors (0402) Murata GRP155R71C223K 100pF 5% ceramic capacitors (0402) Murata GRP1555C1H101J 0.1F 10% ceramic capacitor (0603) Murata GRM188R71E104K 15pF 5% ceramic capacitors (0402) Murata GRP1555C1H150J 0.01F 10% ceramic capacitors (0402) Murata GRP155R71E103K 0.022F 5% film capacitors (1206) Panasonic ECHU1C223JX5 1500pF 10% ceramic capacitors (0402) Murata GRP155R71H152K 2200pF 10% ceramic capacitor (0402) Murata GRP155R71H222K 0.47F 10% ceramic capacitor (0402) Murata GRP155R60J474K 1.0pF 0.1pF ceramic capacitor (0402) Murata GRP1555C1H1R0B 1.0F 10% tantalum capacitors A case AVX TAJA105K016 1.0F 10% ceramic capacitor (0402) Murata GRP155R60J105K 0.1F 10% ceramic capacitors (0805) Murata GRM21BR71H104K 0.01F 10% ceramic capacitors (0805) Murata GRM216R71H103K 8.0pF 0.1pF ceramic capacitors (0402) Murata GRP1555C1H8R0B 22F 10% ceramic capacitors (1206) Murata GRM31CR60J226K
DESIGNATION QTY C102 C103, C104 J1, J2, J3, J6-J11, J15, J16, J17, J33, J59 1 2
DESCRIPTION 27pF 5% ceramic capacitor (0402) Murata GRP1555C1H270J 2.2pF 0.1pF ceramic capacitors (0402) Murata GRP1555C1H2R2B SMA edge-mount connectors--round contact Johnson 142-0701-801 2 x 10, dual in-line header, 100-mil centers Sullins PTC36DAAN
14
8
J24 1 4 3 2 2 1 1 1 3 1 3 4 2 2 J4, J5, J18-J22, J31, JU6-JU10, JU12, JU14, JU16-JU23, JU28-JU31 JU24
1
27
1 x 2, 2-pin in-line headers, 100-mil centers Sullins PTC36SAAN
1
1 x 5, 5-pin in-line header, 100-mil centers Sullins PTC36SAAN
JU1-JU5, JU11, JU13, JU15, JU25, JU26, JU27, JU32, JU33, JU34 J12, J13, J14, TP1, TP2, TP3, TP5, TP6, TP7 L1 L2 L3, L4 L7, L8 L9, L10, L13
14
1 x 3, 3-pin in-line headers, 100-mil centers Sullins PTC36SAAN
9
Test points Keystone 5000 3.3nH 0.2nH inductor (0402) Murata LQP15MN3N3C00 2.2nH 0.3nH inductor (0402) Murata LQG15HN2N2S00 100nH 5% inductors (0402) TOKO LLV1005-FBR10J 5.6nH 5% inductors (0402) Coilcraft 0402CS-5N6XJB 9nH 5% inductors (0402) Coilcraft 0402CS-9N0XJB
1 1 2 2 3
_______________________________________________________________________________________
7
www..com MAX2560/MAX2566/MAX2572 Evaluation Kits
Evaluate: MAX2560/MAX2566/MAX2572
MAX2572 Component List (continued)
DESIGNATION QTY L12 L14 L15 L16 L17 L18 L19 R1, R6 R2, R3 R4, R8, R9 R5, R7, R18, R22-R27, R76-R79 R10 R11 R12 R13, R14, R45, R96, R97, R98 R15, R16, R17, R38, R52, R53, R54, R56, R59 R19, R20 R21 R28 R39 R40, R104, R107 R46 R47, R48 R49, R50 1 1 1 1 1 1 1 2 2 3 13 1 1 1 6 DESCRIPTION 27pF 5% ceramic capacitor (0402) Murata GRP1555C1H270J 15nH 5% inductor (0402) Murata LQG15HN15NJ00 33nH 2% inductor (0402) Murata LQP15MN33NG00 7.5nH 5% inductor (0402) Coilcraft 0402CS-7N5XJB 5.1nH 5% inductor (0402) Coilcraft 0402CS-5N1XJB 22nH 5% inductor (0402) Murata LQG15HN22NJ00 12nH 5% inductor (0402) Murata LQG15HN12NJ00 10k 10% variable resistors Bournes 3296W-1-103 150 5% resistors (0402) 3.3 5% resistors (0402) 0 5% resistors (0402) 56 5% resistor (0402) 1M 5% resistor (0402) 33 5% resistor (0402) 100 1% resistors (0402)
U4 U5 U6 U7, U8, U9 U10 U11, U12 Y1 None None None None None 1 1 1 3 1 2 1 1 1 1 1 1 DESIGNATION QTY R51 R55, R57 R58 R61, R63-R68, R70 R62 R99-R103, R108 R105, R106 R109, R110 T3, T5, T6 U1 U2 1 2 1 8 1 6 2 2 3 1 1 DESCRIPTION 330 5% resistor (0402) 576 1% resistors (0402) 2.0k 5% resistor (0402) 5.1k 5% resistors (0402) 51 5% resistor (0402) 511 1% resistors (0402) 39 5% resistors (0402) 680 5% resistors (0402) Balun transformers B5F TOKO 458DB-1011 MAX2572 48-pin QFN GSM VCO Murata MQT1C1A897M UMTS VCO Murata MQK301-1528 VCO Murata MQE956A1G32 GSM/DCS VCO Murata MQW140A1G23 SOT23-5L MAX8867EUK28 Open Low-voltage precision op amps MAX412CSA 13.0MHz VC TCXO Kinseki VC-TCXO-208C-13P0 36in socket connector ribbon cable--20 contacts INTF2300 interface board MAX2560/MAX2566/MAX2572 EV kit circuit board rev 3 MAX2560/MAX2566/MAX2572 data sheet MAX2560/MAX2566/MAX2572 EV kit data sheet
9 2 1 1 1 3 1 2 2
Open 20 1% resistors (0402) 6.8 5% resistor (0402) 576 5% resistor (0402) 13k 1% resistor (0402) 1k 5% resistors (0402) 430 5% resistor (0402) 510 5% resistors (0402) 360 5% resistors (0402)
8
_______________________________________________________________________________________
www..com
MAX2560/MAX2566/MAX2572 Evaluation Kits
Quick Start
5) With MAX2560/MAX2566/MAX2572 control software active in the REG screen, set the SHDN box to 0 to place the IC in shutdown mode. 6) Turn on the power supplies. Cellular CDMA Mode Perform the following steps to evaluate the MAX2560 in the cellular CDMA mode: 1) Verify shunt JU24 is in the LOTDMA position. 2) With MAX2560/MAX2566/MAX2572 control software active in the REG screen, use Table 1 to set the operating mode to cellular CDMA. Also, change the reference frequency to 19.2MHz in the control software. 3) Connect the I and Q outputs of the arbitrary waveform generator to the I (J15) and Q (J16) ports. Set the generator to reverse-channel CDMA settings. Set the output voltage level to 400mVPK. 4) Connect RFL (J9) to the spectrum analyzer. Configure the spectrum analyzer to measure ACPR for the reverse-channel CDMA. Set the center frequency to 836MHz with 50MHz span and a +10dBm reference level. 5) Adjust the R6 (VGCIF) to obtain an output power of +8dBm after accounting for cable and connector loss. The ACPR in 30kHz bandwidth at 885kHz offset should be -54dBc, and the ACPR in 30kHz bandwidth at 1.98MHz offset should be -65dBc. PCS CDMA Mode Perform the following steps to evaluate the MAX2560 in the PCS CDMA mode: 1) Verify shunt JU24 is in the LOTDMA position. 2) With MAX2560/MAX2566/MAX2572 control software active in the REG screen, use Table 1 to set the operating mode to PCS CDMA. Also, change the reference frequency to 19.2MHz in the control software. 3) Connect the I and Q outputs of the arbitrary waveform generator to the I (J15) and Q (J16) ports. Set the generator to reverse-channel CDMA settings. Set the output voltage level to 400mVPK. 4) Connect RFH0 (J1) to the spectrum analyzer. Configure the spectrum analyzer to measure ACPR for the reverse-channel CDMA. Set the center frequency to 1880MHz with 50MHz span and a +10dBm reference level. 5) Adjust the R6 (VGCIF) to obtain an output power of +8dBm after accounting for cable and connector loss. The ACPR in 30kHz bandwidth at 1.25MHz offset should be -54dBc, and the ACPR in 30kHz bandwidth at 1.98MHz offset should be -65dBc.
9
Evaluate: MAX2560/MAX2566/MAX2572
The MAX2560/MAX2566/MAX2572 EV kits are fully assembled and factory tested. Follow the instructions in the Connections and Setup section.
Test Equipment Required
This section lists the recommended test equipment to verify the operation of the MAX2560/MAX2566/ MAX2572. It is intended as a guide only, and substitutions may be possible. * One RF signal generator capable of delivering -5dBm of output power in the 1GHz to 3GHz frequency range (HP8648 or equivalent) for the external RF LO * An RF spectrum analyzer with optional digital modulation personality (Rohde & Schwarz FSEA30 or equivalent) * A power supply capable of providing 200mA at +5V * A power supply capable of providing 50mA at 6.8V * A power supply capable of providing -50mA at -3.2V * I/Q arbitrary waveform generator (Agilent E4433B or equivalent) * PC (486DX33 or better) with WindowsTM95/98, 2000, NT 4.0 or later operating system and an available parallel port * INTF2300 interface board (supplied with EV kit)
Connections and Setup
This section provides step-by-step instructions for getting the EV kit up and running in CDMA, WCDMA, and GSM modes. 1) Verify shunts JU6-JU22 and JU28-JU31 are in place. 2) Connect the INTF2300 interface cable to the EV kit. Note: Pin 1 of the interface cable corresponds to the red wire. Pin 1 is designated in silkscreen on each of the PC boards. 3) With the power supply turned off, connect a +5.0V power supply to the header labeled V5.0 (J31). Connect the power-supply ground to the header labeled GND (J5). (The MAX2560 requires two additional power supplies. Connect the +6.8V power supply to JU28, and connect the -3.2V to TP2. Connect the grounds to GND (J5) or GND (J20), or both.) 4) Install and run the MAX2560/MAX2572 control software. The MAX2566 has its own control software. Software is available for download on the Maxim website at www.maxim-ic.com.
Windows is a trademark of Microsoft.
_______________________________________________________________________________________
www..com MAX2560/MAX2566/MAX2572 Evaluation Kits
Evaluate: MAX2560/MAX2566/MAX2572
WCDMA Mode Perform the following steps to evaluate the MAX2566/ MAX2572 in the WCDMA mode: 1) Verify shunt JU24 is in the LOUMTS position. 2) With MAX2560/MAX2566/MAX2572 control software active in the REG screen, use Tables 2 and 3 to set the operating mode to WCDMA. 3) Connect the I and Q outputs of the arbitrary waveform generator to the I (J15) and Q (J16) ports. Set the generator to WCDMA settings. Verify 300mV peak baseband signal on Q+/Q- (JU2) and I+/I(JU1), or 600mV peak-to-peak differential. 4) The MAX2566 EV kit requires an external LO input. Apply an external LO 1565MHz at -10dBm to the LOH port. 5) Connect RFH0 (J1) to the spectrum analyzer. Configure the spectrum analyzer to measure ACPR for the uplink WCDMA. Set the center frequency to 1950MHz with 50MHz span and a +10dBm reference level. 6) Adjust the R1 (VGCRF) and R6 (VGCIF) (only adjust VGCIF if VGS = 1) to obtain an output power of +8dBm after accounting for cable and connector loss. The ACPR in 3.84MHz bandwidth at 5MHz offset should be -49dBc, and the ACPR in 3.84MHz band-
width at 10MHz offset should be -62dBc. Note that C112-C115 are disconnected for this measurement. GSM 900 Mode Perform the following steps to evaluate the MAX2566/MAX2572 in the GSM 900 mode: 1) Verify shunts JU23-JU26 and JU33 positions with Table 4. 2) With MAX2560/MAX2566/MAX2572 control software active in the REG screen, use Tables 2 and 3 to set the operating mode to GSM 900 mode. 3) Connect the I and Q outputs of the arbitrary waveform generator to the I (J15) and Q (J16) ports. Set the generator to GSM settings. Verify 300mV peak baseband signal on Q+/Q- (JU2) and I+/I- (JU1), or 600mV peak-to-peak differential. 4) The MAX2566 EV kit requires an external LO input. Apply an external LO 1190MHz at -10dBm to the LOH port. 5) Connect GSM (J3) to the spectrum analyzer. Configure the spectrum analyzer to measure spectral mask for the GSM signal. Set the center frequency to 900MHz with 50MHz span and a +10dBm reference level.
Table 1. MAX2560 Register Settings
REGISTER (hex) FRAC_SYNTH FRAC IF_N IF_SYNTH OPCTRL CONFIG TEST CELLULAR CDMA 0B4FDF 020000 000497 00D830 09C01F 07A307 000025 PCS CDMA 0B4FDF 005555 000519 00D830 09F49F 07A307 000025
Table 2. MAX2566 Register Settings
REGISTER (hex) FRAC_SYNTH FRAC IF_N IF_SYNTH OPCTRL CONFIG TEST WCDMA 0B603B 03B13B 000302 00D80D 0DF77F 07A103 000025 GSM 900 0B602C 09D89E 000244 00D80D 0D876F 07BD007 000025 DCS 1800 0B602C 09D89E 000244 00D80D 0D876F 04BD0F 000025 GSM 1900 0B602C 09D89E 000244 00D80D 0D876F 04BD0F 000025
10
______________________________________________________________________________________
www..com
MAX2560/MAX2566/MAX2572 Evaluation Kits
3) Connect the I and Q outputs of the arbitrary waveform generator to the I (J15) and Q (J16) ports. Set the generator to GSM settings. Verify 300mV peak baseband signal on Q+/Q- (JU2) and I+/I- (JU1), or 600mV peak-to-peak differential. 4) The MAX2566 EV kit requires an external LO input. Apply an external LO 1610MHz at -10dBm to the LOH port. 5) Connect GSM (J33) to the spectrum analyzer. Configure the spectrum analyzer to measure spectral mask for the GSM signal. Set the center frequency to 1900MHz with a +10dBm reference level.
DCS 1800 Mode Perform the following steps to evaluate the MAX2566/MAX2572 in the DCS 1800 mode: 1) Verify shunts JU23-JU26 and JU33 positions with Table 4. 2) With MAX2560/MAX2566/MAX2572 control software active in the REG screen, use Tables 2 and 3 to set the operating mode to DCS 1800 mode. 3) Connect the I and Q outputs of the arbitrary waveform generator to the I (J15) and Q (J16) ports. Set the generator to GSM settings. Verify 300mV peak baseband signal on Q+/Q- (JU2) and I+/I- (JU1), or 600mV peak-to-peak differential. 4) The MAX2566 EV kit requires an external LO input. Apply an external LO 1510MHz at -10dBm to the LOH port. 5) Connect GSM (J33) to the spectrum analyzer. Configure the spectrum analyzer to measure spectral mask for the GSM signal. Set the center frequency to 1800MHz with 50MHz span and a +10dBm reference level. GSM 1900 Mode Perform the following steps to evaluate the MAX2566/MAX2572 in the GSM 1900 mode: 1) Verify shunts JU23-JU26 and JU33 positions with Table 4. 2) With MAX2560/MAX2566/MAX2572 control software active in the REG screen, use Tables 2 and 3 to set the operating mode to GSM 1900 mode.
Evaluate: MAX2560/MAX2566/MAX2572
Layout Considerations
The MAX2560/MAX2566/MAX2572 EV kits can serve as guides for board layout. Keep PC board trace lengths as short as possible to minimize parasitics. Also, keep decoupling capacitors as close to the IC as possible with a direct connection to the ground plane.
INTF2300 SPI Interface Board
The INTF2300 interface board is used to interface 3wire SPI protocol from a PC's parallel port to the EV kit. This board level translates 5V logic from the PC to VCC of the EV kit (typically, this is 2.85V logic). The INTF2300 also provides buffering and EMI filtering. Its absolute maximum supply voltage is 4.6V, limited by the breakdown of the buffer IC. The recommended operating supply voltage range is +2.7V to +3.6V.
Table 3. MAX2572 Register Settings
REGISTER (hex) FRAC_SYNTH FRAC IF_N IF_SYNTH OPCTRL CONFIG TEST WCDMA 070778 062763 000302 00D80D 0DF77F 07A103 000000 GSM 900 0B075B 089D8A 000244 00D80D 0D876F 07BD07 000000 DCS 1800 0B0774 027627 000244 00D80D 0D876F 04BD07 000000 GSM 1900 0B077B 0D89D9 000244 00D80D 0D876F 04BD0F 000000
Table 4. GSM Jumper Settings
MODE GSM 900 DCS 1800 GSM 1900 JU23 CLOSE CLOSE CLOSE JU24 LOGSM1 LOGSM1 LOGSM1 JU25 LOW LOW HIGH JU26 LOW HIGH HIGH JU33 LOW HIGH HIGH
______________________________________________________________________________________
11
www..com MAX2560/MAX2566/MAX2572 Evaluation Kits
Evaluate: MAX2560/MAX2566/MAX2572
Figure 1. MAX2560 EV Kit Schematic (Sheet 1 of 3) 12 ______________________________________________________________________________________
www..com
MAX2560/MAX2566/MAX2572 Evaluation Kits Evaluate: MAX2560/MAX2566/MAX2572
Figure 1. MAX2560 EV Kit Schematic (Sheet 2 of 3) ______________________________________________________________________________________ 13
www..com MAX2560/MAX2566/MAX2572 Evaluation Kits
Evaluate: MAX2560/MAX2566/MAX2572
Figure 1. MAX2560 EV Kit Schematic (Sheet 3 of 3) 14 ______________________________________________________________________________________
www..com
MAX2560/MAX2566/MAX2572 Evaluation Kits Evaluate: MAX2560/MAX2566/MAX2572
Figure 2. MAX2566 EV Kit Schematic (Sheet 1 of 3) ______________________________________________________________________________________ 15
www..com MAX2560/MAX2566/MAX2572 Evaluation Kits
Evaluate: MAX2560/MAX2566/MAX2572
Figure 2. MAX2566 EV Kit Schematic (Sheet 2 of 3) 16 ______________________________________________________________________________________
www..com
MAX2560/MAX2566/MAX2572 Evaluation Kits Evaluate: MAX2560/MAX2566/MAX2572
Figure 2. MAX2566 EV Kit Schematic (Sheet 3 of 3) ______________________________________________________________________________________ 17
www..com MAX2560/MAX2566/MAX2572 Evaluation Kits
Evaluate: MAX2560/MAX2566/MAX2572
Figure 3. MAX2572 EV Kit Schematic (Sheet 1 of 3) 18 ______________________________________________________________________________________
www..com
MAX2560/MAX2566/MAX2572 Evaluation Kits Evaluate: MAX2560/MAX2566/MAX2572
Figure 3. MAX2572 EV Kit Schematic (Sheet 2 of 3) ______________________________________________________________________________________ 19
www..com MAX2560/MAX2566/MAX2572 Evaluation Kits
Evaluate: MAX2560/MAX2566/MAX2572
Figure 3. MAX2572 EV Kit Schematic (Sheet 3 of 3) 20 ______________________________________________________________________________________
www..com
MAX2560/MAX2566/MAX2572 Evaluation Kits Evaluate: MAX2560/MAX2566/MAX2572
1.0"
1.0"
Figure 4. MAX256_/MAX257_ EV Kit Component Placement Guide--Component Side
Figure 5. MAX256_/MAX257_ EV Kit Component Placement Guide--Solder Side
1.0"
1.0"
Figure 6. MAX256_/MAX257_ EV Kit PC Board Layout-- Component Side
Figure 7. MAX256_/MAX257_ EV Kit PC Board Layout-- Ground Plane 21
______________________________________________________________________________________
www..com MAX2560/MAX2566/MAX2572 Evaluation Kits
Evaluate: MAX2560/MAX2566/MAX2572
1.0"
1.0"
Figure 8. MAX256_/MAX257_ EV Kit PC Board Layout--Inner Layer
Figure 9. MAX256_/MAX257_ EV Kit PC Board Layout--Solder Side
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
22 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2004 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.

▲Up To Search▲

Price & Availability of MAX2560

	To Download MAX2560 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .