View 117634-01_490602.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

5.7" (145mm) BLDC Bypass Blower
400 WATT, 240 VOLT
Part Number Blower Data
Stages Vacuum, Max. (Sealed Vacuum) Pressure, Max. (Sealed Pressure) Flow Rate, Max. (Open Flow) Inlet/Outlet Diameter Length (Dimension "I" above) Length (Dimension "L" above) in. H2O mBar n. H2O mBar CFM L/sec inches mm inches mm inches mm
Unit of Measure
Standard Flow
117634 M* 117640 E* 1 28 69 30 74 69 33 1.25 31.75 2.53 64.26 5.08 129.03 117633 M 117639 E 2 45 112 51 126 62 29 1.25 31.75 1.25 31.75 5.99 152.15 117632 M* 117638 E* 3 60 149 70 174 58 27 1.25 31.75 2.14 54.36 6.89 175.01 117637 M* 117643 E* 1 23 57 25 62 114 54 1.75 44.45 .47 11.94 5.22 132.59
High Flow
117636 M* 117642 E* 2 39 97 45 112 97 46 1.75 44.45 1.53 38.86 6.27 159.26 117635 M* 117641 E* 3 53 131 61 151 86 41 1.75 44.45 2.53 64.26 7.28 184.91
Typical Performance Points Air Flow
0 CFM 10 CFM 20 CFM 30 CFM 40 CFM 50 CFM 60 CFM 70 CFM 80 CFM 90 CFM 100 CFM 110 CFM in. H2O in. H2O in. H2O in. H2O in. H2O in. H2O in. H2O in. H2O in. H2O in. H2O in. H2O in. H2O 30.3 27.9 26.2 23.6 19.0 13.3 7.0 3.7 51.0 44.2 41.8 35.9 27.8 16.6 3.7
Pressure
69.9 59.9 52.8 44.1 32.1 18.1 24.8 23.6 22.6 21.5 19.5 17.9 16.1 13.8 12.0 8.7 6.7 0 44.6 41.0 39.8 35.8 32.0 28.0 23.9 17.9 12.1 0 61.5 55.8 51.5 46.0 40.1 34.2 28.2 19.6 8.1
*These part numbers are available through AMETEK Rotron distributors. See page 54 for distributor information. NOTES: Nominal input voltage: 240 Volts AC RMS +/- 10%, 50/60Hz Input current: 5 amps AC RMS maximum Temperature: Working Air: 0o C to 50C, Ambient Air: 0o C to 50C, Storage Air: -40o C to 85C Dielectric Testing: 1500 volts AC RMS 60Hz applied for one second between input pins and ground, 3mA leakage max. Speed Control: E (Electrical): Pulse Width Modulation or Analog input voltage (User Supplied), 0 to 10 Volts DC Nominal, 10mA Maximum, 3 to 15 volts DC Maximum. Access to sensitivity adjustment for 0-10 VDC speed control. (Ref. pin connection) M (Mechanical): A potentiometer is available for speed control of the blower. The potentiometer can be preset for a specific speed. Access to speed adjustment.
36
5.7/400BHV99
5.7" (145mm) BLDC Bypass Blower
400 WATT, 240 VOLT
Regulatory Agency Certification: T.U.V. Rheinland Bauart Certification* is qualified per EN60950 under License No. R0097184. Underwriters Laboratories, Inc. Qualified per UL507 under File E-94403. Canadian Standards Association Qualified per C22.2#113 under File LR 43448. Miscellaneous: Intake & exhaust tubes, all cooling ducts and vents must not be obstructed. Intake and exhaust are free of grease, oil, or foreign particles. Amp housing #1-480763-0 (to be supplied by customer), mates with post header assembly. *IEC 801 testing has been completed, and specific data can be provided upon request.
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions, data is corrected to 0.075 lb./ft3 air density (29.92" Hg @ 70 F.). Actual performance will vary depending on the operating environment and application. AMETEK Rotron products are not designed for use with volatile, hazardous or corrosive gases. Blower housings are not sealed, slight air/gas leakage will occur. AMETEK Rotron products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to revise its products without notification.
37
5.7/400BHV99

▲Up To Search▲

Price & Availability of 117634-01

	To Download 117634-01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .