![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr LC Combined Type Data Sheet 1 Block Type EMIFILr LC Combined Type BNX02* Series I Dimension 12.10.2 0 9.10.2 (1) (2) 20 Insertion Loss (dB) I Insertion Loss Characteristics (3) BNX022 (4) 1.050.2 1.60.3 3.10.2 40 (1) (3) 0.30.1 (2.45) www..com (3) (4) 7.00.2 1.550.2 1.30.2 (4) (2) 60 (4) 80 (2) (1) 4.20.3 0.30.1 : Electrode 2.50.2 1.550.2 (4) (in mm) 1.00.3 100 0.1 0.5 1 10 5 Frequency (MHz) 50 100 500 1000 I Equivalent Circuit I Packaging Code L K Packaging 180mm Embossed Tape 330mm Embossed Tape Bulk(Bag) Minimum Quantity 400 1500 100 L1 (1) B L2 (3) PSG C1 L3 C2 CB (2) B CG (4) (1)-(4): Terminal Number PSG: Power Supply Ground CG: Circuit Ground CB: Circuit+B I Rated Value (p: packaging code) Part Number BNX022-01p BNX023-01p Rated Voltage Withstand Voltage 50Vdc 100Vdc 125Vdc 250Vdc Rated Current 10A 15A Insulation Resistance(min.) 500M ohm 500M ohm Insertion Loss 1MHz to 1GHz:35dB min. (20 to 25 degrees C line impedance=50 ohm) 1MHz to 1GHz:35dB min. (20 to 25 degrees C line impedance=50 ohm) Operating Temperature Range: -40C to 125C In operating temperatures exceeding +85C, derating of current is necessary. Continued on the following page. o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2008.3.6 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr LC Combined Type Data Sheet Continued from the preceding page. 2 I Notice (Rating) In operating temperatures exceeding +85C, derating of current is necessary for BNX022 series. Please apply the derating curve shown in chart according to the operating temperature. Derating Derated Current (A) 10 1 0 www..com -40 85 125 Operating Temperature (C) I Notice (Rating) In operating temperatures exceeding +85C, derating of current is necessary for BNX023 series. Please apply the derating curve shown in chart according to the operating temperature. Derating 15 Derated Current (A) 1 0 -40 85 125 Operating Temperature (C) I !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2008.3.6 http://www.murata.com/ |
Price & Availability of BNX022-01X
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |