e-series surface mount mixer 935 - 960 mhz EMRS-5LX m/a-com, inc. north america: tel. (800) 366-2266 n asia/paci?: tel. +81 (03) 3226-1671 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +81 (03) 3226-1451 fax +44 (1344) 300 020 1 speci?ations subject to change without notice. v3.00 features lo power: +3 dbm up to -1 dbm rf surface mount speci?ations @ 25 ? frequency range rf 935 - 960 mhz lo 857 - 882 mhz if 80 mhz conversion loss (db) typical maximum 935 - 960 mhz 7.5 8.5 isolation (db) typical minimum lo to rf 857 - 882 mhz 25 20 lo to if 857 - 882 mhz 30 22 two tone third order input intercept ( dbm) typical minimum +10 +8 test conditions rf1: 935 mhz @ -10 dbm rf2: 936 mhz @ -10 dbm lo: 855 mhz @ +3 dbm rf1: 950 mhz @ -10 dbm rf2: 951 mhz @ -10 dbm lo: 870 mhz @ +3 dbm rf1: 960 mhz @ -10 dbm rf2: 961 mhz @ -10 dbm lo: 880 mhz @ +3 dbm operating characteristics impedance 50 ohms nominal rf input for 1db compression -1 dbm dc polarity negative ordering information part no. packaging EMRS-5LX tubes EMRS-5LXtr forward tape & reel sm-1 l l l s 0619 c dimensions in ( ) are in mm. unless otherwise noted: .x = ?.04 (1.00) .xx = ?.02 (0.50) .xxx = ?.010 (0.250) pin con?uration parameter absolute maximum rf power 50 mw peak if current 40 ma storage temperature -55? to 100? operating temperature -55? to 100? pin temperature (10 seconds) 260? function pin no. lo 1 rf 4 if 5 ground 2,3,6 absolute maximum ratings
|
