12-17-98 sb98107 rev. a light ballast protection c517 5mm x 15mm ceramic fuse form no. c517 page 1 of 2 bif doc #2025 bussmann dimensional data time in seconds 1 .1 .1 1 10 100 current in amperes .01 100 10 ampere rating 3a markings: manufacturer? symbol, product symbol, voltage, ampere, testing agency mark (optional) dimensions are in millimeters (mm) 15.0 0.5mm 5.0mm (typ.) 0.6mm dia. (typ) 5.2 0.3mm time-current characteristic curves?verage melt (full size curves available) c517 axial leaded fast-acting fuse. limits for pre-arcing time/ul listed fuses. 135% 110% 200% amp ratings max min max 3a 1 hr. 4 hr. 2 sec. time-current characteristics: (at 25? ambient) current % of rating opening time 3.30 100% 4 hours min. 4.05a 135% 400 sec. typ. 6.00a 200% 0.550 sec. typ. 9.00a 300% 0.100 sec. typ. 12.0a 400% 0.046 sec. typ. 15.0a 500% 0.027 sec. typ. 24.0a 800% 0.007 sec. typ. 30.0a 1000% 0.004 sec. typ. agency file numbers: ul listing. file e75865, guide # jdyx. csa certification. file lr65063, class 1422-01. ul recognized. file e75865, guide # jdyx2. product symbol: c517 physical fuse size: 5 x 15mm mechanical characteristics: materials: endcaps are silver-plated brass; leads are tin-plated copper and tube is glass. optional sleeve is flexible fluoropolymer (ul flammability rating vw-1). the tube will self extinguish within one minute. 25% maximum flag burn per astm flammability test astm d2671 procedure c. lead pull: leads will withstand a seven pound pull applied axially to the lead for five seconds. lead bend: leads will be bent 90 degrees in one direction, back to original direction, then 90 degrees in the opposite direction and return to the cycle. leads will withstand two cycles. the bending is to be done with a two pound weight attached to the end of the lead. temp. range: -55? to +85? with proper derating. weight: 1000 = 1.33kg. ce logo denotes compliance with european union low voltage directive (50-1000v ac, 75-1500v dc). refer to bif document #8002 or contact bussmann application engineering at 314-527-1270 for more information.
light ballast protection c517 5mm x 15mm ceramic fuse form no. c517 page 2 of 2 bif doc #2025 bussmann 12-17-98 sb98107 rev. a the only controlled copy of this bif document is the electronic read-only version located on the bussmann network drive. all ot her copies of this bif document are by definition uncontrolled. this bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applicatio ns. bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. bussmann also reserves the right to change or update, withou t notice, any technical information contained in this bulletin. once a product has been select- ed, it should be tested by the user in all possible applications. max. rated typical typical voltage ampere voltage interrupting pre-arcing drop at 100% rating ac rating i 2 t (a 2 s) rated current (mv) 100a/350vac p.f. = 1.0 3a 350v 100a/250vac 5.2 160 p.f. = 0.7 - 0.8 10ka/125vac p.f. = 0.7 - 0.8 marking: endcaps will bear the following markings: manufacturer s symbol, product symbol, ampere rating, agency approval symbols and vol tage rating (250v). note: parts can not be marked 350v since there is no provision within the csa standards for a 350v certification of a product in this case size. smallest packages will bear 125v, 250v and 350v rating information. packaging & ordering information: product ampere symbol rating blank - standard s - transparent sleeve for package code sealed fuses. bk/ bulk package (100 pcs) tr/ tape & reel (500 pcs) tr1/ tape & reel (1,000 pcs) tr2/ tape & reel (1,500 pcs) note: tape & reel packaging per eia 296-e (10.2mm component pitch and 52.4mm tape-to-tape spacing) 3a c517 u.l. u.r. csa electrical characteristics:
|
