GP2S60 GP2S60 absolute maximum ratings outline dimensions (unit : mm) detector center emitter center (0.7) (0.65) 1.7 1.1 0.4 (0.57) (0.57) 2 ? 0.65 (0.63) (0.7) 2.7 3.2 (1.8) 2 ? 1 (0.55) 1 1 4 2 3 3 2 4 3 1 4 2 anode collector emitter cathode plating area pattern wiring is not allowed on portion not to cause short-circuit. internal connection diagram ? unspecified tolerance : 0.15mm ? ( ) : reference dimensions ? tolerance : 0.1mm 2 ? 1 2 ? 1.7 recommended pattern 2 ? 0.65 2 ? 0.45 parameter symbol rating unit input forward current 50 ma 6 v output 75 75 mw mw 100 mw 35 6 v v 20 ma ? 25 to + 85 ?c storage temperature ? 40 to + 100 ?c 260 ?c operating temperature reverse voltage power dissipation collector-emitter voltage emitter-collector voltage collector current collector power dissipation i f v r p d v ceo v eco i c p c t stg t opr p tot (t a = 25?c) soldering temperature t sol * * for max. 5s total power dissipation 1. audio equipment 2. vcr 3. camcoders 4. printers 5. cd-rom drives features applications subminiature, reflective type photointerrupter for automatic mounting 1. subminiature, leadless type. (dimensions : 3.2 1.7 1.1mm) 2. soldering reflow. (peak temperature : 240?c, 10s or less) 3. taped model. (2 000 pcs/reel) 4. visible light cut-off type. notice in the absence of confirmation by device specification sheets, sharp takes no responsibility for any defects that may occ ur in equipment using any sharp devices shown in catalogs, data books, etc. contact sharp in order to obtain the latest device specification sheets before usin g any sharp device. internet internet address for electronic components group http://sharp-world.com/ecg/
GP2S60 electro-optical characteristics parameter symbol unit input forward voltage v f v v r = 6v a na i r i ceo na a reverse current collector dark current collector current leak current output i c i leak s s i f = 20ma v ce = 20v v ce = 2v, i f = 4ma v ce = 2v, i f = 4ma min. ? ? ? ? ? ? 10 100 130 500 max. 100 100 1.4 conditions v ce = 2v, i c = 100 a r l = 1 000 ? , d = 1mm typ. ? 85 ? 40 ? 20 20 1.2 1 (ta = 25 ? c) rise time t r fall time t f transfer charac- teristics response time *1 *2 *1 refer to fig.11 *2 no reflective object rank table model no. ic( a) conditions rank mark GP2S60a GP2S60 GP2S60b a a or b 40 to 80 40 to 130 65 to 130 b i f = 4ma v ce = 2v ta = 25 ? c fig.2 power dissipation vs. ambient temperature forward current i f (ma) 0 10 20 30 40 50 60 ? 25 0 100 75 50 85 25 ambient temperature t a ( c) fig.1 forward current vs. ambient temperature power dissipation p (mw) ambient temperature t a ( c) 0 20 40 60 80 100 120 p tot ? 25 0 100 75 50 85 25 p,p c
GP2S60 fig.5 collector current vs. collector- emitter voltage fig.7 collector dark current vs. ambient temperature fig.6 relative collector current vs. ambient temperature fig.3 forward current vs. forward voltage fig.4 collector current vs. forward current forward current i f (ma) 500 200 100 50 20 10 5 2 0 0.5 1 1.5 2 2.5 3 forward voltage v f (v) t a = 75 c 50 c 25 c 0 c ? 25 c 1 0 100 200 300 400 500 600 700 0 5 10 15 20 forward current i f (ma) collector current i c ( a) v ce = 2v t a = 25 c ? 25 v ce = 2v i f = 4ma 0 20 40 60 80 100 120 0 255075 relative collector current (%) ambient temperature t a ( c) collector current i c ( a) 0 100 200 300 400 500 600 0246810 collector-emitter voltage v ce (v) i f = 15ma 10ma 7ma 4ma 2ma t a = 25 c collector dark current i ceo (a) 10 ? 10 10 ? 6 10 ? 7 2 5 2 5 2 5 2 5 10 ? 8 10 ? 9 0 255075100 ambient temperature t a ( c) v ce = 20v
GP2S60 fig.9 test circuit for response time fig.10 relative collector current vs. distance between sensor and aluminum evaporation glass fig.11 measuring configulation of collector current fig.12 spectral sensitivity l al evaporation glass 10 20 30 40 50 60 70 80 90 100 1 4.5 2345 3.5 2.5 1.5 0.5 v ce = 2v i f = 4ma ta = 25 ? c relative collector current (%) distance between sensor and aluminum evaporation glass l (mm) relative sensitivity (%) 0 100 80 60 40 20 600 700 800 900 1000 1100 1200 wavelength (nm) t a = 25 c 10% input output input output 90% t s t d v cc r d r l t f t r d = 1mm glass plate aluminum evaporation glass fig.8 response time vs. load resistance response time ( s) 1 10 100 1000 0.1 1 1000 10 100 load resistance r l (k ? ) v ce = 2v i c = 100 a t a = 25 c t f t s t d t r
GP2S60 fig.13 relative collector current vs.oms card moving distance fig.14 relative collector current vs.oms card moving distance 20 40 60 80 100 6 4 2 035 1 ? 3 ? 1 ? 2 relative collector current (%) oms card moving distance (mm) v ce = 2v i f = 4ma d = 1mm 1mm d 0 oms test card sensor +? fig.15 reflow soldering max.120s max.90s max.60s max.10s max. 165 c only one time soldering is available within the temperature profile shown below. 200 c 25 c max. 240 c 1 to 4?c/s 1 to 4?c/s 1 to 4?c/s sensor 20 40 60 80 100 6 4 2 035 1 ? 3 ? 1 ? 2 relative collector current (%) oms card moving distance (mm) v ce = 2v i f = 4ma d = 1mm 1mm d 0 oms test card +? other precautions an infrared lamp used to heat up for soldering may cause a localized temperature rise in the resin. so keep the package temperature within that specified in item 1. also avoid immersing the resin part in the solder. even if within the temperature profile above, there is the possibility that the gold wire in package is broken in case that the deformation of pcw gives the affection to lead pins. please use after confirmation the conditions fully by actual solder reflow machine.
notice the circuit application examples in this publication are provided to explain representative applications of sharp devices and are not intended to guarantee any circuit design or license any intellectual property rights. sharp takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of sharp's devices. contact sharp in order to obtain the latest device specification sheets before using any sharp device. sharp reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. manufacturing locations are also subject to change without notice. observe the following points when using any devices in this publication. sharp takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) the devices in this publication are designed for use in general electronic equipment designs such as: - - - personal computers - - - office automation equipment - - - telecommunication equipment [terminal] - - - test and measurement equipment - - - industrial control - - - audio visual equipment - - - consumer electronics (ii) measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when sharp devices are used for or in connection with equipment that requires higher reliability such as: - - - transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) - - - traffic signals - - - gas leakage sensor breakers - - - alarm equipment - - - various safety devices, etc. (iii)sharp devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: - - - space applications - - - telecommunication equipment [trunk lines] - - - nuclear power control equipment - - - medical and other life support equipment (e.g., scuba). contact a sharp representative in advance when intending to use sharp devices for any "specific" applications other than those recommended by sharp or when it is unclear which category mentioned above controls the intended use. if the sharp devices listed in this publication fall within the scope of strategic products described in the foreign exchange and foreign trade control law of japan, it is necessary to obtain approval to export such sharp devices. this publication is the proprietary product of sharp and is copyrighted, with all rights reserved. under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of sharp. express written permission is also required before any use of this publication may be made by a third party. contact and consult with a sharp representative if there are any questions about the contents of this publication.
|
