View IP4284CZ10-TBR_1419959.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1. product profile 1.1 general description the devices are designed to protect high-s peed interfaces such as high-definition multimedia interface (hdmi), displayport, supe rspeed usb, external serial advanced technology attachment (esata) and low volt age differential signaling (lvds) interfaces against electrostatic discharge (esd). the devices include high-level esd protection di odes for ultra high-speed signal lines and are available in two package variants: xson10 and tssop10. all signal lines are protected by a special diode configuration offering ultra low line capacitance of only 0.5 pf. these diodes pr ovide protection to downstream components from esd voltages up to 8 kv contact according to iec 61000-4-2, level 4. 1.2 features and benefits ? pb-free, restriction of hazardous substanc es (rohs) compliant and free of halogen and antimony (dark green compliant) ? system esd protection for usb 2.0 an d usb superspeed 3.0, hdmi 1.3 and hdmi 1.4, displayport, esata and lvds ? all signal lines with integrated rail- to-rail clamping diodes for downstream esd protection of 8 kv according to iec 61000-4-2, level 4 ? matched 0.5 mm trace spacing ? signal lines with 0.05 pf matching capacitance between signal pairs ? line capacitance of only 0.5 pf for each channel ? 4-channel, xson10 or tssop10 pb-free package ? design-friendly ?pass-thru? signal routing 1.3 applications the devices are designed for high-speed re ceiver and transmitter port protection: ? tvs, monitors ? dvd recorders and players ? notebooks, mother boards, graphic cards and ports ? set-top boxes and game consoles IP4284CZ10-TBR; ip4284cz10-tt esd protection for ultra high-speed interfaces rev. 3 ? 19 may 2011 product data sheet
IP4284CZ10-TBR_tt all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 3 ? 19 may 2011 2 of 17 nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces 2. pinning information 3. ordering information 4. marking table 1. pinning pin symbol description simplified outline graphic symbol IP4284CZ10-TBR (sot1176-1) 1 ch1 channel 1 esd protection xson10 2 ch2 channel 2 esd protection 3 gnd ground 4 ch3 channel 3 esd protection 5 ch4 channel 4 esd protection 6 n.c. not connected 7 n.c. not connected 8 gnd ground 9 n.c. not connected 10 n.c. not connected ip4284cz10-tt (sot552-1) 1 ch1 channel 1 esd protection tssop10 2 ch2 channel 2 esd protection 3 gnd ground 4 ch3 channel 3 esd protection 5 ch4 channel 4 esd protection 6 n.c. not connected 7 n.c. not connected 8 gnd ground 9 n.c. not connected 10 n.c. not connected transparent top view 109876 12345 24 3, 8 018aaa0 01 1 5 15 10 6 24 3, 8 018aaa0 01 1 5 table 2. ordering information type number package name description version IP4284CZ10-TBR xson10 plastic extremely thin small outline package; no leads; 10 terminals; body 1 2.5 0.5 mm sot1176-1 ip4284cz10-tt tssop10 plastic thin shrink small outline package; 10 leads; body width 3 mm sot552-1 table 3. marking codes type number marking code IP4284CZ10-TBR 84 ip4284cz10-tt 4284
IP4284CZ10-TBR_tt all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 3 ? 19 may 2011 3 of 17 nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces 5. limiting values [1] all pins to ground. 6. characteristics [1] this parameter is guaranteed by design. [2] between signal pin and pin n.c. [3] according to iec 61000-4-5 and iec 61000-4-9. [4] human body model (hbm) according to jesd22-a-j114d. table 4. limiting values in accordance with the absolute maximum rating system (iec 60134). symbol parameter conditions min max unit v i input voltage ? 0.5 +5.5 v v esd electrostatic discharge voltage iec 61000-4-2, level 4 [1] contact discharge - 8kv air discharge - 15 kv t amb ambient temperature ? 40 +85 c t stg storage temperature ? 55 +125 c table 5. characteristics t amb =25 c unless otherwise specified. symbol parameter conditions min typ max unit v brzd zener diode breakdown voltage i test =1ma 6- 9v i lrzd zener diode reverse leakage current per tmds channel; v i =3.0v --1 a v f forward voltage - 0.7 - v c ch(tmds) tmds channel capacitance f=1mhz; v bias =2.5v [1] 0.40.50.7pf c ch(tmds) tmds channel capacitance difference f=1mhz; v bias =2.5v [1] -0.05-pf c ch(mutual) mutual channel capacitance f=1mhz; v bias =2.5v [1] [2] -0.07-pf r dyn dynamic resistance i = 1 a [3] positive transient - 1 - negative transient - 1 - v cl(ch)trt(pos) positive transient channel clamping voltage v esd =8kv [4] -8-v
IP4284CZ10-TBR_tt all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 3 ? 19 may 2011 4 of 17 nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces (1) sdd21 (2) scc21 normalized to 100 ; differential pairs at ch1/ch2 or at ch3/ch4 sdd21 normalized to 100 ; differential pairs ch1/ch2 versus ch3/ch4 fig 1. mixed-mode differential and common-mode insertion loss; typical values fig 2. mixed-mode differential next crosstalk; typical values 018aaa002 ? 9 ? 3 3 sdd21; scc21 (db) ? 15 f (hz) 10 6 10 10 10 9 10 7 10 8 (1) (2) 018aaa003 ? 60 ? 30 0 sdd21; next (db) ? 90 f (hz) 10 8 10 10 10 9
IP4284CZ10-TBR_tt all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 3 ? 19 may 2011 5 of 17 nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces 5 gbit/s; usb 3.0 cp0 pattern 5 gbit/s; usb 3.0 cp0 pattern fig 3. eye diagram using reference pcb fig 4. typical eye diagram for ip4284cz10 (1) pin 2 (2) pin 1 deviation from typical capacitance normalized at v bias =2.5v fig 5. line capacitance as a function of bias voltage; typical values 018aaa004 018aaa005 018aaa006 v bias (v) ? 0.5 5.5 3.5 1.5 0.0 ? 0.2 0.2 0.4 c d (pf) ? 0.4 (1) (2)
IP4284CZ10-TBR_tt all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 3 ? 19 may 2011 6 of 17 nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces iec 61000-4-5; t p =8/20 s; positive pulse iec 61000-4-5; t p =8/20 s; negative pulse fig 6. dynamic resistance with positive clamping fig 7. dynamic resistance with negative clamping t p = 100 ns; transmission line pulse (tlp) t p = 100 ns; transmission line pulse (tlp) fig 8. dynamic resistance with positive clamping fig 9. dynamic resistance with negative clamping i (a) 0.5 2.5 2.0 1.0 1.5 018aaa008 7.5 8.0 8.5 v cl (v) 7.0 i (a) 0.5 2.5 2.0 1.0 1.5 018aaa007 2.5 2.0 3.0 3.5 v cl (v) 1.5 i (a) 0 4 8 12 14 10 6 2 018aaa009 6 12 18 v cl (v) 0 i (a) ? 16 0 ? 4 ? 12 ? 8 018aaa010 ? 8 ? 12 ? 4 0 v cl (v) ? 16
IP4284CZ10-TBR_tt all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 3 ? 19 may 2011 7 of 17 nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces 7. application information the devices are designed to provide high-l evel esd protection for high-speed serial data buses such as hdmi, displayport, esata and lvds data lines. when designing the printed-circu it board (pcb), careful consideration should be given to basic high-speed routing guidelines, impedance matching, and signal coupling. basic application diagrams for the esd protec tion of an hdmi interface are shown in figure 10 and figure 11 . fig 10. application diagram of hdmi esd protection using IP4284CZ10-TBR 018aaa115 n.c. cec tmds_d2+ gnd tmds_gnd tmds_d1+ tmds_gnd tmds_d0+ tmds_gnd tmds_clk+ tmds_gnd tmds_clk- ddc_clk ddc_dat gnd +5 v IP4284CZ10-TBR ip4221cz6 tmds_d1C tmds_d2C tmds_ch2+ tmds_ch1+ tmds_ch1C tmds_ch2C tmds_ch2+ tmds_ch1+ tmds_ch1C tmds_ch2C gnd tmds_d0C hdmi connector IP4284CZ10-TBR 5 4 2 1 3 8 8 5 4 2 1 3 654 100 nf 123 hot plug detection
IP4284CZ10-TBR_tt all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 3 ? 19 may 2011 8 of 17 nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces fig 11. application diagram of hdmi esd protection using ip4284cz10-tt 018aaa012 n.c. cec tmds_d2+ tmds_gnd tmds_d1+ tmds_gnd tmds_d0+ tmds_gnd tmds_clk+ tmds_gnd tmds_clkC ddc_clk ddc_dat gnd +5 v hot plug detection ip4284cz10-tt ip4220cz6 tmds_d1C tmds_d2C tmds_d2+ tmds_d1+ tmds_d1C tmds_d2C tmds_d0+ tmds_clk+ tmds_clk1C tmds_d0C tmds_d0C hdmi connector ip4284cz10-tt 100 nf
IP4284CZ10-TBR_tt all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 3 ? 19 may 2011 9 of 17 nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces 8. package outline fig 12. package outline sot1176-1 (xson10) references outline version european projection issue date iec jedec jeita sot1176-1 - - - - - - - - - sot1176-1_po 10-06-21 10-06-22 unit (1) mm max nom min 0.5 0.05 0.00 0.25 0.20 0.15 2.6 2.5 2.4 1.1 1.0 0.9 0.5 0.2 0.40 0.35 0.30 0.1 a dimensions note 1. plastic or metal protrusions of 0.075 mm maximum per side are not included. x son10: plastic extremely thin small outline package; no leads; 1 0 terminals; body 1 x 2.5 x 0.5 mm sot1176- 1 a 1 a 3 0.127 bdeee 1 2 kll 1 0.45 0.40 0.35 vw 0.05 y 0.05 y 1 0.05 0 1 2 mm scale x c y c y 1 terminal 1 index area b a d e detail x a 1 a a 3 b k l l 1 terminal 1 index area e 1 e a c b v c w 10 6 5 1
IP4284CZ10-TBR_tt all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 3 ? 19 may 2011 10 of 17 nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces fig 13. package outline sot552-1 (tssop10) unit a 1 a max. a 2 a 3 b p l h e l p wy v ce d (1) e (2) z (1) references outline version european projection issue date iec jedec jeita mm 0.15 0.05 0.95 0.80 0.30 0.15 0.23 0.15 3.1 2.9 3.1 2.9 0.5 5.0 4.8 0.67 0.34 6 0 0.1 0.1 0.1 0.95 dimensions (mm are the original dimensions) notes 1. plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. plastic or metal protrusions of 0.25 mm maximum per side are not included. 0.7 0.4 sot552-1 99-07-29 03-02-18 w m b p d z e 0.25 15 10 6 a a 2 a 1 l p (a 3 ) detail x l h e e c v m a x a y 2.5 5 mm 0 scale tssop10: plastic thin shrink small outline package; 10 leads; body width 3 mm sot552 -1 1.1 pin 1 index
IP4284CZ10-TBR_tt all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 3 ? 19 may 2011 11 of 17 nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces 9. soldering reflow soldering is the only recommended soldering method. fig 14. reflow soldering footprint sot1176-1 (xson10) sot1176-1 remark: stencil of 75 m is recommended. a stencil of 75 m gives an aspect ratio of 0.77 with a stencil of 100 m one will obtain an aspect ratio of 0.58 footprint information for reflow soldering of xson10 package solder land plus solder paste occupied area solder land solder paste deposit solder resist hx by hy 0.05 c p d 0.05 ay dimensions in mm ay by c d hy 1.25 0.3 0.475 0.2 p 0.5 1.5 hx 2.45 generic footprint pattern refer to the package outline drawing for actual layout sot1176-1_fr
IP4284CZ10-TBR_tt all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 3 ? 19 may 2011 12 of 17 nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces reflow soldering is the only recommended soldering method. fig 15. reflow soldering footprint sot552-1 (tssop10) dimensions in mm ay by d1 d2 gy hy p1 c gx sot552-1_fr hx sot552-1 solder land occupied area footprint information for reflow soldering of tssop10 package ay by gy c hy hx gx p1 generic footprint pattern refer to the package outline drawing for actual layout p2 (0.125) (0.125) d1 d2 (4x) p2 5.400 3.200 1.100 0.300 0.400 2.750 3.900 5.650 3.700 0.500 0.550
IP4284CZ10-TBR_tt all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 3 ? 19 may 2011 13 of 17 nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces 10. abbreviations table 6. abbreviations acronym description dvd digital versatile disc esata external serial advanced technology attachment esd electrostatic discharge hbm human body model hdmi high-definition multimedia interface lvds low voltage differential signaling next near end crosstalk rohs restriction of hazardous substances tlp transmission line pulse tmds transition minimized differential signaling utlp ultra thin leadless package
IP4284CZ10-TBR_tt all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 3 ? 19 may 2011 14 of 17 nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces 11. revision history table 7. revision history document id release date data sheet status change notice supersedes IP4284CZ10-TBR_tt v.3 20110519 product data sheet - ip4284cz10-tb_tt v.2 modifications: ? deleted type number ip4284cz10-tb. ? added type number IP4284CZ10-TBR. ? section 4 ? marking ? : added. ? table 4 ? limiting values ? : updated v esd values. ? section 9 ? soldering ? : added. ? section 12 ? legal information ? : updated. ip4284cz10-tb_tt v.2 20100401 product data sheet - ip4284cz10-tb_tt v.1 ip4284cz10-tb_tt v.1 20100304 preliminary data sheet - -
IP4284CZ10-TBR_tt all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 3 ? 19 may 2011 15 of 17 nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces 12. legal information 12.1 data sheet status [1] please consult the most recently issued document before initiating or completing a design. [2] the term ?short data sheet? is explained in section ?definitions?. [3] the product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple device s. the latest product status information is available on the internet at url http://www.nxp.com . 12.2 definitions draft ? the document is a draft versi on only. the content is still under internal review and subject to formal approval, which may result in modifications or additions. nxp semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall hav e no liability for the consequences of use of such information. short data sheet ? a short data sheet is an extract from a full data sheet with the same product type number(s) and title. a short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. for detailed and full information see the relevant full data sheet, which is available on request vi a the local nxp semiconductors sales office. in case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. product specification ? the information and data provided in a product data sheet shall define the specification of the product as agreed between nxp semiconductors and its customer , unless nxp semiconductors and customer have explicitly agreed otherwis e in writing. in no event however, shall an agreement be valid in which the nxp semiconductors product is deemed to offer functions and qualities beyond those described in the product data sheet. 12.3 disclaimers limited warranty and liability ? information in this document is believed to be accurate and reliable. however, nxp semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. in no event shall nxp semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interrupt ion, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. notwithstanding any damages that customer might incur for any reason whatsoever, nxp semiconductors? aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the terms and conditions of commercial sale of nxp semiconductors. right to make changes ? nxp semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. this document supersedes and replaces all information supplied prior to the publication hereof. suitability for use ? nxp semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an nxp semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. nxp semiconductors accepts no liability for inclusion and/or use of nxp semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer?s own risk. applications ? applications that are described herein for any of these products are for illustrative purpos es only. nxp semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. customers are responsible for the design and operation of their applications and products using nxp semiconductors products, and nxp semiconductors accepts no liability for any assistance with applications or customer product design. it is customer?s sole responsibility to determine whether the nxp semiconductors product is suitable and fit for the customer?s applications and products planned, as well as fo r the planned application and use of customer?s third party customer(s). customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. nxp semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer?s applications or products, or the application or use by customer?s third party customer(s). customer is responsible for doing all necessary testing for the customer?s applic ations and products using nxp semiconductors products in order to av oid a default of the applications and the products or of the application or use by customer?s third party customer(s). nxp does not accept any liability in this respect. limiting values ? stress above one or more limiting values (as defined in the absolute maximum ratings system of iec 60134) will cause permanent damage to the device. limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the recommended operating conditions section (if present) or the characteristics sections of this document is not warranted. constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. terms and conditions of commercial sale ? nxp semiconductors products are sold subject to the gener al terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , unless otherwise agreed in a valid written individual agreement. in case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. nxp semiconductors hereby expressly objects to applying the customer?s general terms and conditions with regard to the purchase of nxp semiconducto rs products by customer. no offer to sell or license ? nothing in this document may be interpreted or construed as an offer to sell products t hat is open for acceptance or the grant, conveyance or implication of any lic ense under any copyrights, patents or other industrial or intellectual property rights. export control ? this document as well as the item(s) described herein may be subject to export control regulations. export might require a prior authorization from national authorities. document status [1] [2] product status [3] definition objective [short] data sheet development this document contains data from the objecti ve specification for product development. preliminary [short] data sheet qualification this document contains data from the preliminary specification. product [short] data sheet production this docu ment contains the product specification.
IP4284CZ10-TBR_tt all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2011. all rights reserved . product data sheet rev. 3 ? 19 may 2011 16 of 17 nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces quick reference data ? the quick reference data is an extract of the product data given in the limiting values and characteristics sections of this document, and as such is not comple te, exhaustive or legally binding. non-automotive qualified products ? unless this data sheet expressly states that this specific nxp semicon ductors product is automotive qualified, the product is not suitable for automotive use. it is neither qualified nor tested in accordance with automotive testing or application requirements. nxp semiconductors accepts no liabili ty for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. in the event that customer uses t he product for design-in and use in automotive applications to automotive s pecifications and standards, customer (a) shall use the product without nxp semiconductors? warranty of the product for such automotive applicat ions, use and specifications, and (b) whenever customer uses the product for automotive applications beyond nxp semiconductors? specifications such use shall be solely at customer?s own risk, and (c) customer fully indemnifies nxp semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive app lications beyond nxp semiconductors? standard warranty and nxp semiconduct ors? product specifications. 12.4 trademarks notice: all referenced brands, produc t names, service names and trademarks are the property of their respective owners. 13. contact information for more information, please visit: http://www.nxp.com for sales office addresses, please send an email to: salesaddresses@nxp.com
nxp semiconductors IP4284CZ10-TBR/tt esd protection for ultra high-speed interfaces ? nxp b.v. 2011. all rights reserved. for more information, please visit: http://www.nxp.com for sales office addresses, please se nd an email to: salesaddresses@nxp.com date of release: 19 may 2011 document identifier: IP4284CZ10-TBR_tt please be aware that important notices concerning this document and the product(s) described herein, have been included in section ?legal information?. 14. contents 1 product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 general description . . . . . . . . . . . . . . . . . . . . . 1 1.2 features and benefits . . . . . . . . . . . . . . . . . . . . 1 1.3 applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 pinning information . . . . . . . . . . . . . . . . . . . . . . 2 3 ordering information . . . . . . . . . . . . . . . . . . . . . 2 4 marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 6 characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3 7 application information. . . . . . . . . . . . . . . . . . . 7 8 package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9 9 soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 10 abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 13 11 revision history . . . . . . . . . . . . . . . . . . . . . . . . 14 12 legal information. . . . . . . . . . . . . . . . . . . . . . . 15 12.1 data sheet status . . . . . . . . . . . . . . . . . . . . . . 15 12.2 definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 12.3 disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 12.4 trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 16 13 contact information. . . . . . . . . . . . . . . . . . . . . 16 14 contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

▲Up To Search▲

Price & Availability of IP4284CZ10-TBR

	To Download IP4284CZ10-TBR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .