View 6MBI150UB-120_926634.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

h04-004-07 fuji electric co.,ltd. matsumoto factory specification device name : type name : spec. no. : igbt module 6MBI150UB-120 ms5f 5315 1 13 ms5f 5315 nov. 08 ?02 s.yoshiwatari t.miyasaka k.yamada t.fujihira a nov. 08 ?02 b
h04-004-06 r e v i s e d r e c o r d s date classi- fication ind. content applied date drawn checked approved enactment issued date ms5f 5315 2 13 t.miyasaka k.yamada t.fujihira t.fujihira a y.kobayashi revision k.yamada t.miyasaka jan.-31-?03 a revised characteristics ic rating,vce(sat),vf,turn-off time,rth added packing, reliability and warning b revision t.fujihira y.kobayashi k.yamada t.miyasaka b feb.-14-?03 revised cies,vf, eon,err (p4/13,10/13,11/13) nov..-08-?02
h04-004-03 13 ms5f 5315 3 6MBI150UB-120 2. equivalent circuit 1. outline drawing ( unit : mm ) section a-a uv w 1 2 3 4 5 6 7 8 9 10 11 12 13,14,15 16,17,18 21,22,23 24,25,26 19 20 27,28,29 30,31,32 33,34,35 a b
h04-004-03 13 ms5f 5315 4 a b 3.absolute maximum ratings ( at tc= 25 unless otherwise specified tc=25 tc=80 tc=25 tc=80 (*1) all terminals should be connected together when isolation test will be done. (*2) two thermistor terminals should be connected together, each other terminals should be connected together and shorted to base plate when isolation test will be done. (*3) recommendable value : 2.5~3.5 nm (m5) 4. electrical characteristics ( at tj= 25 unless otherwise specified) b (*)biggest internal terminal resistance among arm. vce = 1200v - b value t = 25/50 vce(sat) (chip) tj= 25 tj=125 tj= 25 tj=125 - k thermistor resistance r t = 25 b 3305 3375 3450 495 input capacitance cies vce=10v,vge=0v,f=1mhz - b 17 -nf -0.03 - a 0.37 - a 0.07 0.30 -2.50 2.00 - 4.5 6.5 units -1.75 a 2.1 maximum ratings - 2.25 2.60 na 1.0 ma v - 8.5 v ic = 150ma 200 vce = 20v items symbols vge=20v vce = 0v -- - tstg mounting *3 3.5 conditions between terminal and copper base *1 between thermistor and others *2 storage temperature isolation voltage viso -40 +125 units max. typ. screw torque - min. characteristics 150 gate-emitter voltage collector current junction temperature collector power dissipation -ic 150 300 a 740 1ms 2500 vac n ? m -ic pluse pc tj a w 1 device ac : 1min. continuous v 20 v items symbols conditions vces collector-emitter voltage vges vcc = 600v ic = 150a vge=15v 1200 ic icp a 200 150 a 400 300 1.20 0.60 - -0.36 -0.21 s forward on voltage vf (terminal) tj= 25 - b 2.10 3.05 v b 1.70 1.00 - reverse recovery time - vf (chip) tj= 25 - tj=125 if = 150a - b 1.60 a 2.55 tj=125 s if = 150a - 5000 - -0.35 t =100 465 520 turn-on time turn-off time gate-emitter leakage current gate-emitter threshold voltage vge=0v vce(sat) ( terminal) - - b 2.20 vge=15v ic = 150a vge = 0v toff tf rg = 2.2 vge(th) inverter iges zero gate voltage collector current ices ton tr tr (i) collector-emitter saturation voltage 3.4 - m lead resistance, terminal-chip * r lead -
h04-004-03 13 ms5f 5315 5. thermal resistance characteristics this is the value which is defined mounting on the additional cooling fin with thermal compo und. 6. indication on module 7.applicable category this specification is applied to igbt module named 6MBI150UB-120 . 8.storage and transportation notes ? the module should be stored at a standard temperature of 5 to 35 and humidity of 45 to 75% . ? store modules in a place with few temperature changes in order to avoid condensation on the module surface. ? avoid exposure to corrosive gases and dust. ? avoid excessive external force on the module. ? store modules with unprocessed terminals. ? do not drop or otherwise shock the modules when transporting. 9. definitions of switching time 10. packing and labeling display on the packing box - logo of production - type name - lot no - products quantity in a packing box lot.no. place of manufacturin g (code ) items symbols conditions characteristics units min. typ. max. - thermal resistance(1device) contact thermal resistance rth(j-c) rth(c-f) with thermal compound ( ) - -0.05 /w 150a 1200v 6MBI150UB-120 - a 0.17 -- a 0.28 igbt fwd l vcc ic v ce r g v ge v ge v ce ic 0v 0a 0v 1 0% 90% 1 0% 1 0% 90% 90% 0v ic v ce on on on on t t t t r r r r t t t t r(i) r(i) r(i) r(i) t t t t off off off off t t t t f f f f t t t t rr rr rr rr i i i i rr rr rr rr t t t t 5 a a b
h04-004-03 13 ms5f 5315 11. reliability test results 6 reliabilit y test items test cate- gories test items test methods and conditions reference norms eiaj ed-4701 number of sample accept- ance number 1 terminal strength pull force : 20n a - 111 5 ( 1 : 0 ) (pull test) test time : 101 sec. method 1 2 mounting strengt h screw torque : 2.5 ~ 3.5 n ? m (m5) a - 112 5 ( 1 : 0 ) test time method 2 : 101 sec. 3 vibration range of frequency : 10 ~ 500hz a - 121 5 ( 1 : 0 ) sweeping time : 15 min. acceleration : 10g sweeping direction : each x,y,z axis test time : 6 hr. (2hr./direction) 4 shock maximum accelerati o : 1000g a - 122 5 ( 1 : 0 ) pulse width : 0.5msec. direction : each x,y,z axis test time : 3 times/direction 5 solderabitlity solder temp. : 2355 a - 131 5 ( 1 : 0 ) immersion time : 51sec. test time : 1 time each terminal should be immersed in solder within 1~1.5mm from the body. 6 resistance to solder temp. : 2605 a - 132 5 ( 1 : 0 ) soldering heat immersion time : 101sec. test time : 1 time each terminal should be immersed in solder within 1~1.5mm from the body. 1 high temperature storage temp. : 1255 b - 111 5 ( 1 : 0 ) storage test duration : 1000hr. 2 low temperature storage temp. : -405 b - 112 5 ( 1 : 0 ) storage test duration : 1000hr. 3 temperature storage temp. : 853 b - 121 5 ( 1 : 0 ) humidity relative humidity : 855% storage test duration : 1000hr. 4 unsaturated test temp. : 121 b - 123 5 ( 1 : 0 ) pressure cooker atmos p heric p ressure : 2.0310 5 pa (reference value) test duration : 20hr. 5 temperature +3 b - 131 5 ( 1 : 0 ) cycle test temp. : low temp. -40 - 5 +5 high temp. 125 - 5 rt 5 ~ 35 dwell time : high ~ rt ~ low ~ rt 1hr. 0.5hr. 1hr. 0.5hr. number of cycles : 100 cycles 6 thermal shock +0 b - 141 5 ( 1 : 0 ) test temp. : high temp. 100 - 5 +5 low temp. 0 - 0 used liquid : water with ice and boiling water dipping time : 5 min. par each temp. transfer time : 10 sec. number of cycles : 10 cycles mechanical tests environment tests a a b
h04-004-03 13 ms5f 5315 7 reliabilit y test items test cate- gories test items test methods and conditions reference norms eiaj ed-4701 number of sample accept- ance number 1 high temperature +0 d - 313 5 ( 1 : 0 ) reverse bias test temp. : ta = 125 - 5 ( t j Q 150 ) bias voltage : vc = 0.8vces bias method : applied dc voltage to c-e vge = 0v test duration : 1000hr. 2 high temperature +0 d - 323 5 ( 1 : 0 ) bias test temp. : ta = 125 - 5 ( t j Q 150 ) bias voltage : vc = vge = +20v or -20v bias method : applied dc voltage to g-e vce = 0v test duration : 1000hr. 3 temperature b - 121 5 ( 1 : 0 ) humidity bias test temp. : 85 +-3 o c relative humidity : 85 +-5% bias voltage : vc = 0.8vces bias method : applied dc voltage to c-e vge = 0v test duration : 1000hr. 4 intermitted on time : 2 sec. d - 322 5 ( 1 : 0 ) operating life off time : 18 sec. (power cycle) test temp. : ? t j =1005 de g ( for igbt ) t j Q 150 , ta=255 number of cycles : 15000 cycles endurance tests endurance tests failure criteria item characteristic symbol failure criteria unit note lower limit upper limit electrical leakage current ices - usl2 ma characteristic iges - usl2 a gate threshold voltage vge(th) lsl0.8 usl1.2 ma saturation voltage vce(sat) - usl1.2 v forward voltage vf - usl1.2 v thermal igbt ? vge - usl1.2 mv resistance or ? vce fwd ? vf - usl1.2 mv isolation voltage viso broken insulation - visual visual inspection inspection peeling - the visual sample - plating and the others lsl : lower specified limit. usl : upper specified limit. note : each parameter measurement read-outs shall be made after stab ilizing the com ponents at room ambient for 2 hours minimum, 24 hours maximum after removal from the tests. and in case of the wetting tests, for example, moisture resistance tests, each component shall be made wipe or dry completely before the measurement. each parameter measurement read-outs shall be made after stab ilizing the com ponents at room ambient for 2 hours minimum, 24 hours maximum after removal from the tests. and in case of the wetting tests, for example, moisture resistance tests, each component shall be made wipe or dry completely before the measurement. a b
h04-004-03 13 ms5f 5315 8 reliability test results test cate- gorie s test items reference norms eiaj ed- 4701 number of test sample number of failure sample 1 terminal strength a - 111 5 0 (pull test) method 1 2 mounting strength a - 112 5 0 method 2 3 vibration a - 121 5 0 4 shock a - 122 5 0 5 solderabitlity a - 131 5 0 6 resistance to soldering heat a - 132 5 0 1 high temperature storage b - 111 5 0 2 low temperature storage b - 112 5 0 3 temperature humidity b - 121 5 0 storage 4 unsaturated b - 123 5 0 pressure cooker 5 temperature cycle b - 131 5 0 6 thermal shock b - 141 5 0 1 high temperature reverse bias d - 313 5 0 2 high temperature bias d - 323 5 0 ( for gate ) 3 temperature humidity bias b - 121 5 0 4 intermitted operating life d - 322 5 0 (power cycling) ( for igbt ) mechanical tests environment tests endurance tests mechanical tests environment tests endurance tests a b
h04-004-03 13 ms5f 5315 9 a b vge=0v, f=1mhz, tj=25 vcc=600v ic=150a tj= 25 collector current vs. collector-emitter voltage tj= 125 / chip capacitance vs. collector-emitter voltage (typ.) dynamic gate charge (typ.) collector current vs. collector-emitter voltage tj= 25 / chip collector-emitter voltage vs. gate-emitter voltage collector current vs. collector-emitter voltage vge=15v (typ.) / chip tj=25 ? c / chip 0 100 200 300 400 0.0 1.0 2.0 3.0 4.0 5.0 collector current : ic [a] collector-emitter voltage : vce [v] vge=20v 15v 12v 10v 8v 0 100 200 300 400 0.0 1.0 2.0 3.0 4.0 5.0 collector current : ic [a] collector-emitter voltage : vce [v] vge=20v 15v 12v 10v 8v 0 100 200 300 400 0.0 1.0 2.0 3.0 4.0 collector current : ic [a] collector-emitter voltage : vce [v] tj=125 tj=25 0 2 4 6 8 10 5.0 10.0 15.0 20.0 25.0 collector - emitter voltage : vce [ v ] gate - emitter voltage : vge [ v ] ic=300a ic=150a ic= 75a 0.1 1.0 10.0 100.0 0.0 10.0 20.0 30.0 capacitance : cies, coes, cres [ nf ] collector-emitter voltage : vce [v] cies coes cres 0 200 400 600 800 collector-emitter voltage : vce [ 200v/div ] gate - emitter voltage : vge [ 5v/div ] gate charge : qg [ nc ] 0 vge vce
h04-004-03 13 ms5f 5315 vcc=600v, ic=150a, vge=15v, tj= 125 reverse bias safe operating area switching time vs. collector current (typ.) vcc=600v, vge=15v, rg=2.2 , tj= 25 vcc=600v, ic=150a, vge=15v, tj= 25 switching time vs. collector current (typ.) vcc=600v, vge=15v, rg=2.2 , tj=125 switching time vs. gate resistance (typ.) +vge=15v,-vge Q 15v, rg R 2.2 ,tj Q 125 switching loss vs. collector current (typ.) vcc=600v, vge=15v, rg=2.2 switching loss vs. gate resistance (typ.) 10 100 1000 10000 0 50 100 150 200 250 300 switching time : ton, tr, toff, tf [ nsec ] collector current : ic [ a ] ton toff tr tf 10 100 1000 10000 0 50 100 150 200 250 300 switching time : ton, tr, toff, tf [ nsec ] collector current : ic [ a ] toff ton tr tf 10 100 1000 10000 0.1 1.0 10.0 100.0 1000.0 switching time : ton, tr, toff, tf [ nsec ] gate resistance : rg [ ? ] tr tf toff ton 0.0 5.0 10.0 15.0 20.0 25.0 30.0 0 100 200 300 switching loss : eon, eoff, err [ mj/pulse ] collector current : ic [ a ] eon(125 ) eon(25 ) eoff(125 ) err(125 ) err(25 ) eoff(25 ) 0.0 25.0 50.0 75.0 100.0 125.0 0.1 1.0 10.0 100.0 1000.0 switching loss : eon, eoff, err [ mj/pulse ] gate resistance : rg [ ? ] eoff err eon 0 100 200 300 400 0 400 800 1200 collector current : ic [ a ] collector - emitter voltage : vce [ v ] 10 a a a a b b b
h04-004-03 13 ms5f 5315 11 a a b transient thermal resistance reverse recovery characteristics (typ.) vcc=600v, vge=15v, rg=2.2 forward current vs. forward on voltage (typ.) chip temperature characteristic (typ.) 0.1 1 10 100 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 temperature [ ] resistance : r [ k ] 0 50 100 150 200 250 300 350 400 0.00 1.00 2.00 3.00 4.00 forward current : if [ a ] forward on voltage : vf [ v ] tj=125 tj=25 10 100 1000 0 100 200 300 r everse recovery curren t : i rr [ a ] reverse recover y time : trr [ nsec ] forward current : if [ a ] trr (125 ) irr (125 ) irr (25 ) trr (25 ) 0.001 0.010 0.100 1.000 0.001 0.010 0.100 1.000 thermal resistanse : rth(j-c) [ /w ] pulse width : pw [ sec ] fwd igbt b
h04-004-03 13 ms5f 5315 12 warnings warnings warnings warnings - this product shall be used within its absolute maximum rating (voltage, current, and temperature). this product may be broken in case of using beyond the ratings. u?~???R????? ~??????????? - connect adequate fuse or protector of circuit between three-phase line and this product to prevent the equipment from causing secondary destruction. ?]1??????]??u?gm?` ???``???? - use this product after realizing enough working on environment and considering of product's reliab ility life. this product may be broken before target life of the system in case of using beyond the product's reliab ility life. u??h????u?m????u?m? u?m????????????? - if the product had been used in the environment with acid, organic matter, and corrosive gas ( hydrogen sulfide, sulfurous acid gas), the product's performance and appearance can not be ensured easily. ?C?????????h????u?C?Q??^ ?? - use this product within the power cycle curve (technical rep.no. : mt5f12959) u???``? ( gY no.: mt5f 1 2959) - never add mechanical stress to deform the main or control terminal. the deformed terminal may cause poor contact problem. ??????????????? ? - according to the outline drawing, select proper length of screw for main terminal. longer screws may break the case. u?????L???x ?L?`?p?? - use this product with keeping the cooling fin's flatness between screw holes within 100um at 100mm and the roughness within 10um. also keep the tightening torque within the limits of this specification. improper handling may cause isolation breakdown and this may lead to a critical accident. ??????g??? 100mm 100um ?? 10um ?`??Q ???~F????1??k??? - it shall be confirmed that igbt's operating locus of the turn-off voltage and current are within the rbsoa specification. this product may be broken if the locus is out of the rbsoa. `???R???E rbsoa ?????_J rbsoa ???????? - if excessive static electricity is applied to the control terminals, the devices may be broken. implement some countermeasures against static electricity. ?^??????????? ?Qr????g? - b never add the excessive mechanical stress to the main or control terminals when the product is applied to equipments. the module structure ma y be broken. ????g?H???^??? ????? - b in case of insufficient -vge, erroneous turn-on of igbt may occur. -vge shall be set enou g h value to prevent this malfunction. ( recommended value : -vge = -15v ) `?R -vge ??`????? `???? -vge ???O?X : -vge = - 1 5v) a b
h04-004-03 13 ms5f 5315 13 cautions cautions cautions cautions - fuji electric is constantly making every endeavor to improve the product quality and reliab ility. however, semiconductor products may rarely happen to fail or malfunction. to prevent accidents causing injury or death, damage to property like by fire, and other social damage resulted from a failure or malfunction of the fuji electric semiconductor products, take some measures to keep safety such as redundant design, spread-fire-preventive design, and malfunction-protective design. ??C?~u??|m??????u???k? `????Cu?u???`Y?1? ???b?p??p????LO????O??`?O? ???_?v - the application examples described in this specification only explain typical ones that used the fuji electric products. this specification never ensure to enforce the industrial property and other rights, nor license the enforcement rights. ??d????Cu?????h??? ???I??g??????g??SZ??? - the product described in this specification is not designed nor made for being applied to the equipment or systems used under life-threatening situations. when you consider applying the product of this specification to particular used, such as vehicle-mounted units, shipboard equipment, aerospace equipment, medical devices, atomic control systems and submarine relaying equipment or systems, please apply after confirmation of this product to be satisfied about system construction and required reliab ility. ??d?u?????r??C?????? ???O??u????????u??IC?C? @C??????????H?????| ?????_J? if there is any unclear matter in this specification, please contact fuji electric co.,ltd. a b

▲Up To Search▲

Price & Availability of 6MBI150UB-120

	To Download 6MBI150UB-120 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .