agilent hlmp-fwxx 5mm extra bright flat top ingan white led lamps. data sheet description these high intensity white led lamps are based on ingan material technology. a blue led die is coated by phosphor to produce white. the typical resulting color is described by the coordinates x = 0.31, y = 0.31 using the 1931 cie chromaticity diagram. features ? ? ? ? ? high luminous white emission ? ? ? ? ? flat top ? ? ? ? ? standoff or non-standoff leads ? ? ? ? ? superior resistance to moisture applications ? ? ? ? ? electronic signs and signals ? ? ? ? ? small area illumination ? ? ? ? ? legend backlighting ? ? ? ? ? general purpose indicators benefit ? ? ? ? ? reduced power consumption, higher reliability, and increased optical/mechanical design flexibility compared to incandescent bulbs and other alternative white light sources. these flat top lamps are untinted, non-diffused, and incorporate precise optics which produce well-defined spatial radiation patterns at specific viewing cone angle. hlmp-fw66, hlmp-fw67 caution: devices are class 1 esd sensitive. please observe appropriate precautions during handling and processing. refer to application note an-1142 for additional details.
2 part numbering system package dimensions package dimension b notes: 1. all dimensions are in millimeters /inches. 2. epoxy meniscus may extend about 1mm (0.040") down the leads. 3. if heat-sinking application is required, the terminal for heat sink is anode. package dimension a mechanical option 00: bulk dd: ammo pack straight leads color bin options 0: full color bin distribution b: color bin 2 & 3 only maximum intensity bin 0: no maximum intensity bin limit others: refer to device selection guide minimum intensity bin refer to device selection guide viewing angle and standoff option 66: flat top without standoff 67: flat top with standoff h l m p - -xxxxxxx fw 5.000.20 [ 0.1970.008 ] 1.140.20 [ 0.0450.008 ] 7.000.20 [ 0.2780.008 ] 31.60 min. [ 1.244 ] 0.500.10 [ 0.0200.004 ] 5.720.20 [ 0.2250.008 ] 2.540.38 [ 0.1000.015 ] cathode flat 1.00 [ 0.038 ] cathode lead min. sq. typ. 5.000.20 [ 0.1970.008 ] 1.140.20 [ 0.0450.008 ] 11.020.25 [ 0.4340.010 ] 31.60 min. [ 1.244 ] 5.720.20 [ 0.2250.008 ] 2.540.38 [ 0.1000.015 ] cathode flat cathode lead 0.500.10 [ 0.0200.004 ] 1.00 [ 0.038 ] min. sq. typ.
3 device selection guide electrical/optical characteristics t a = 25 o c absolute maximum rating at t a = 25 o c notes: 1. derate linearly as shown in figure 2. 2. duty factor 10%, frequency 1khz 3. 1.59 mm (0.060 inch) below body notes: 1. the reverse voltage of the product is equivalent to the forward voltage of the protective chip at i r = 10 a 2. the chromaticity coordinates are derived from the cie 1931 chromaticity diagram and represent the perceived color of the devi ce. notes: 1. tolerance for luminous intensity measurement is 15% 2. the luminous intensity is measured on the mechanical axis of the lamp package. 3. the optical axis is closely aligned with the package mechanical axis. 4. 2 1/2 is the off-axis angle where the luminous intensity is ? the on axis intensity parameters value unit dc forward current [1] 30 ma peak pulsed forward current [2] 100 ma average forward current 30 ma power dissipation 105 mw led junction temperature 110 o c operating temperature range -40 to +85 o c storage temperature range -40 to +100 o c wave soldering temperature [3] 250 for 3 seconds o c parameters symbol min typ max units test condition forward voltage v f 3.2 4.0 v i f = 20 ma reverse voltage [1] v r 5.0 v i r = 10 a thermal resistance r j-pin 240 o c/w led junction to anode lead chromaticity coordinates [2] x y 0.31 0.31 i f = 20 ma capacitance c 70 v f =0, f=1mhz part number typical viewing angle, 2 ? (degree) intensity (mcd) at 20 ma standoff package dimension min. max. hlmp-fw66-lp0xx 85 400 1150 no a hlmp-fw66-mn0xx 85 520 880 no a hlmp-fw66-mnbxx 85 520 880 no a hlmp-fw67-lp0xx 85 400 1150 yes b hlmp-fw67-mn0xx 85 520 880 yes b hlmp-fw67-mnbxx 85 520 880 yes b
4 figure 2. forward current vs. ambient temperature. figure 1. relative intensity vs. wavelength figure 3. relative intensity versus dc forward current figure 5. forward current vs. forward voltage. figure 4. chromaticity shift vs. current *note: (x,y) values @ 20ma reference to (0,0) 0.0 0.2 0.4 0.6 0.8 1.0 380 480 580 680 780 wavelength - nm relative luminous intensity -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0.025 -0.005 0.000 0.005 0.010 0.015 x-coordinates y-coordinates 30ma 20ma 10ma 5ma 1ma 0 5 10 15 20 25 30 35 0 20 40 60 80 100 ambient temperature - ?c i f - forward current - ma r j-a = 585?c/w r j-a = 780?c/w 0 0.3 0.6 0.9 1.2 1.5 0102030 forward current - ma relative luminous intensity 0 5 10 15 20 25 30 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 v f - forward voltage - volts i f - forward current - ma
5 intensity bin limit table tolerance for each bin limit is 15% color bin limit table tolerance for each bin limit is 0.01 note: 1. bin categories are established for classification of products. products may not be available in all bin categories. please contact your agilent representative for information on currently available bins. figure 6. spatial radiation pattern bin intensity (mcd) at 20 ma min max l 400 520 m 520 680 n680 880 p 880 1150 color bin limits with respect to cie 1931 chromaticity diagram 0.0 0.5 1.0 -90 -60 -30 0 30 60 90 angular replacement - degree relative intensity 0.40 0.35 0.30 0.25 0.20 0.26 0.30 0.34 0.38 y-coordinate x-coordinate 3 2 4 1 black body curve rank limits (chromaticity coordinates) 1 x 0.330 0.330 0.356 0.361 y 0.360 0.318 0.351 0.385 2 x 0.287 0.296 0.330 0.330 y 0.295 0.276 0.318 0.339 3 x 0.264 0.280 0.296 0.283 y 0.267 0.248 0.276 0.305 4 x 0.283 0.287 0.330 0.330 y 0.305 0.295 0.339 0.360
www.agilent.com/ semiconductors for product information and a complete list of distributors, please go to our web site. for technical assistance call: americas/canada: +1 (800) 235-0312 or (408) 654-8675 europe: +49 (0) 6441 92460 china: 10800 650 0017 hong kong: (+65) 6756 2394 india, australia, new zealand: (+65) 6755 1939 japan: (+81 3) 3335-8152(domestic/inter- national), or 0120-61-1280(domestic only) korea: (+65) 6755 1989 singapore, malaysia, vietnam, thailand, philippines, indonesia: (+65) 6755 2044 taiwan: (+65) 6755 1843 data subject to change. copyright ? 2004 agilent technologies, inc. october 6, 2004 5989-1452en
|
