hv-at(0)-pj hv-at(3)-pj hv-at(6)-pj hv-at(10)-pj hv-at(20)-pj 0 0 +0.4 0 3 +0.6 0 6 +0.7 10 +0.3 20 +0.7 0 0 +0.5 0 3 +0.7 0 6 +0.8 10 +0.4 20 +0.9 0 0 +0.8 0 3 +0.9 0 6 +0.9 10 +0.6 20 +1.1 0 0 +1 0 3 +1.5 0 6 +1.5 10 +1.5 20 +1.3 1.35 1.4 1.4 1.4 1.4 1.4 1.55 1.55 1.6 0 1.6 0 1.6 0 rohs yes attenuation (db) 18~26.5ghz 26.5~40ghz 40~65ghz dc~18ghz 18~26.5ghz 26.5~40ghz 40~65ghz v.s.w.r. (max) dc~18ghz 1 dc to 65 ghz, hv connector attenuators hv-at series 2006.5 overview small, lightweight and low v.s.w.r makes it ideally suited for the widely used high frequency transmission applications. frequency bandwidth and high reliability is achieved by the use of resistance substrate on the extremely thin board, to form a suspended line. hrs unique resistance substrate design and center conductor connection assures consistent and stable performance in changing temperature environments. applications * optical transmission devices * network analyzers * berts (bit error ratio testing systems) * fwa (fixed wireless access) * measurement applications requiring transmission frequencies of up to 65 ghz. features 1. low v.s.w.r. 1.4 (typical dc to 65 ghz) 2. space-saving design overall dimensions: 9 mm dia. x 24.64 mm long. 3. lightweight total weight: 5.86 g. 4. mating compatibility will mate with corresponding v connector tm or 1.85mm connector. (note) 5. rohs compliant all components and materials comply with eu directive 2002/95/ec. note: v connectors is a registered trademark of anritsu corporation. specifications rating frequency range characteristic impedance power weight dc to 65ghz 50? 1w cw (at 65?) 5.86g operating temperature range operating relative humidity -10? to +65? 90% max. + 0 .0 C 0.4 C 0.3 C 0.7 C 0.3 + 0 .0 C 0.4 C 0.3 C 0.7 C 0.3 + 0 .0 C 0.4 C 0.3 C 0.7 C 0.3 + 0 .0 C0.4 C0.3 C0.7 C0.3 part no. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
2 item 1.vibration 2.shock 3.temperature cycle 4. high temperature exposure 5.low temperature exposure 6.corrosion resistance specification conditions no electrical discontinuity of 1s sec. max. no damage, cracks, or parts dislocation. no electrical discontinuity of 1s sec. max. no damage, cracks, or parts dislocation. no damage, cracks, or parts dislocation. no damage, cracks, or parts dislocation. no damage, cracks, or parts dislocation. no corrosion frequency 10 to 55 hz, single amplitude of 1.5mm, 3 axis, duration of 2 hours. acceleration of 490m/s 2 , sine half-wave waveform, 3 cycles in each of the 3 axis. temperature: -55? / 15? to 25? / 125? / 15? to 25? duration (minutes): 30 / 2 to 3 / 30 / 2 to 3 100 cycles 48 hours at 125? 48 hours at - 55? 5% salt water solution, 48 hours at 35? shell coupling insulator male contact female contact attenuation element stainless steel ptfe (polytetrafluoroethylene) brass berylium copper metal film passivated CCCCCCCC gold plated gold plated CCCCCCCC components material finish series name : hv series at : attenuator attenuation : 0 0 db connector type : pj plug jack w ? i 3 4 2 1 1 2 3 4 m70.75-6g 8hex (24.64) m70.75-6h (?9) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
3 typical data b usage precautions
?ph>?"# )
:qp?(%& "#
?ph>?"# )
:qp?(%& "#
?ph>?"# )
:qp?(%&
"#
?ph>?"# )
:qp?(%& "#
?ph>?"# )
:qp?(%& "# 2 8 , 9! 8 8 !- .. "! . , +8 ,-!- 8 , 32 2 "/! 1 2 , - ?> " . 1 , " 6,. 2!- 8 8 )2 . ! 1 2 ,3! 28,, -9 "! 18 8 ,, /5 2 2 +9 , ' 99/5 +! // "- 2 8 ,8 8 , 2 ,;"5! - /6 r 9; 2. ! 1 "-6, 68 .! ! h6 " "0 2 58 ; 8/ "3! 2 /82/ the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
