aluminum electrolytic 160v to 450v nevh, nehh series 5 nte electronics, inc. voice (800) 631 - 1250 (973) 748 - 5089 fax (973) 748 - 6224 http://www.nteinc.com subminiature high voltage (nevh: radial lead, nehh: axial leads) the nevh and nehh series subminiature aluminum electrolytic capacitors are ideal for polarized capacitor applications requiring small size, high capacitance, high voltage, low cost, and depend- ability over broad temperature ranges. ratings capacitance range: 1.0 f to 470 f tolerance: - 10%, +75% voltage range: 160v to 450v performance specifications operating temperature range: ? for 160v and 250v: -40 c to +85 c ( - 40 f to +185 f) ? for 350v and 450v: -25 c to +85 c ( - 13 f to +185 f) leakage current: i 0.02cv + 100 a (measured after 3 minutes of applied voltage) i = leakage current ( a) c = nominal capacitance ( f) v = rated voltage (v) capacitance tolerance (m): at +20 c (+68 f), 120h z capacitance values through 4.7 f - 10% to +75% capacitance values above 4.7 f - 10% to +50% dissipation factor: at +20 c (+68 f),120h z rated voltage 160, 250, and 350 450 1.0 f to 470 f 0.20 0.25 impedance ratio at low temperature: 120h z comparison z wv 160 - 250 350 450 z @ - 25 c ( - 13 f)/ z @ +20 c (+68 f) 2 2 2 z @ - 40 c ( - 40 f)/ z @ +20 c (+68 f) 4 - - surge voltage: dc rated voltage 160 250 350 450 surge voltage 200 300 400 500 load life: 1000 12hrs @ +85 c (+185 f), at rated voltage leakage current: within values specified above dissipation factor: within 200% of specified value capacitance change max: see table rated voltage capacitance change max 160v to 450v within 20% of the initial value shelf life: 1000 hrs @ +85 c (+185 f), no voltage applied leakage current: within 200% of specified value dissipation factor: within 150% of specified value capacitance change max: within 20% of initial value mechanical specifications lead solderability: meets the requirements of mil - std 202, method 208 marking: consists of series type, nominal capacitance, rated voltage, temperature range, anode and/or cathode identification, vendor identification. recommended cleaning solvents: methanol, isopropanol ethanol, isobutanol, petroleum ether, propanol and/or commercial detergents. halo- genated hydrocarbon cleaning agents such as freon (mf, tf, or tc), trichloroethylene, trichloroethane, or methylchloride are not recommended as they may damage the capacitor. case size and dimensions: d? ? = d ? + 0.5 max l? = l + 1.0 max at d ? 8.0 l? = l + 2.0 max at d ? 10.0 d? ? = d ? + 0.5 max l? = l + 1.0 max at d ? 8.0 l? = l + 2.0 max at d ? 10.0 nevh series nehh series (insulating bar = negative) insulating sleeve l 35.0 min 35.0 min l? 2.3 max d ? d ? d? ? d ? d? ? insulating sleeve d ? l l? 5.0 min 18.0 min a 0.5 ordering information nevh 47 m 160 series capacitance tolerance voltage
nevh, nehh series aluminum electrolytic 160v to 450v 6 nte electronics, inc. voice (800) 631 - 1250 (973) 748 - 5089 fax (973) 748 - 6224 http://www.nteinc.com nevh series (radial type) dimensions: diameter (d ?) x length (l): mm wv cap ( f) 160 250 350 450 1.0 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 2.2 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 3.3 8 x 11.5 10 x 12.5 10 x 16 10 x 20 4.7 8 x 11.5 10 x 12.5 10 x 16 13 x 20 10 10 x 12.5 10 x 20 13 x 21 13 x 25 22 10 x 20 13 x 25 13 x 25 16 x 31.5 33 13 x 21 13 x 25 16 x 31.5 18 x 35.5 47 13 x 25 16 x 25 18 x 36 22 x 35 100 16 x 25 18 x 36 22 x 35 25 x 40 220 18 x 35 330 22 x 35 470 22 x 40 * these dimensions are for reference only, please consult the factory for actual size. nevh series (radial type) mechanical specifications: mm outside diameter (d ?) 6.3 8 10 13 16 18 22 25 lead spacing (a) 2.5 3.5 5 5 7.5 7.5 10 12.5 lead diameter (d ?) 0.5 0.6 0.6 0.6 0.8 0.8 0.8 1.0 * these dimensions are for reference only, please consult the factory for actual size. nehh series (axial type) dimensions: diameter (d ?) x length (l): mm wv cap ( f) 160 250 350 450 1.0 6.3 x 16 8 x 16 8 x 16 10 x 20 2.2 8 x 16 8 x 20 10 x 20 10 x 20 3.3 8 x 16 10 x 20 10 x 20 10 x 20 4.7 8 x 20 10 x 20 10 x 20 13 x 25 10 10 x 25 10 x 20 13 x 25 13 x 30 22 10 x 20 13 x 25 13 x 30 16 x 30 33 13 x 25 13 x 30 16 x 30 16 x 40 47 13 x 30 16 x 30 16 x 40 16 x 40 100 16 x 30 16 x 40 18 x 40 22 x 40 220 22 x 40 330 25 x 52 470 22 x 52 * these dimensions are for reference only, please consult the factory for actual size. nehh series (axial type) mechanical specifications: mm outside diameter (d ?) 6.3 8 10 13 16 18 22 25 lead diameter (d ?) 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 * these dimensions are for reference only, please consult the factory for actual size.
|