dimensions: inch (mm) marking: - xx.xxx (frequency) - ASPE zyx (z: month a to l; y: year 0 for 2000, 1 for 2001 x: traceability code pin function 1 2 3 4 5 6 voltage control tri-state gnd/case output output vdd frequency range operating temperature storage temperature overall frequency stability supply voltage (vdd) input current symmetry rise and fall time (tr/tf) output load output type output voltage pullability start-up time tristate function jitter (12khz - 20mhz) 3.5ps rms max abracon is a b r a c o n i s iso 9001 / qs 9000 i s o 9 0 0 1 / q s 9 0 0 0 certified c e r t i f i e d abracon is iso 9001 / qs 9000 certified 30332 esperanza, rancho santa margarita, california 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com ceramic smd crystal clock oscillator c e r a m i c s m d c r y s t a l c l o c k o s c i l l a t o r with voltage control w i t h v o l t a g e c o n t r o l ceramic smd crystal clock oscillator with voltage control ||||||||||||||| ASPE series standard specifications: options and part identification (left blank if standard) : outline drawing: temperature options: d for -10c to +60c l for -40c to +70c stability options: r for 25 ppm k for 30 ppm h for 35 ppm c for 50 ppm ASPE - supply voltage - frequency - temperature - frequency stability - pullability - symmetry - packaging symmetry option: - s for 45/55% at 1/2vdd pullability option: - n100 for 100 ppm min packaging option: t for tape and reel (1,000pcs/reel) supply voltage options: v for 3.3v5% 2 for 2.5v5% rev1.1-9/04 applications: ? telecommunications equipment high speed switching devices routing devices features: complimentary pecl outputs compact and low in height tri state function 2.5vdc supply voltage option suitable for high density smt., reflow capable tight stability option parameters 1.544 mhz to 700 mhz 0c to + 70c - 55c to + 125c 100 ppm max. 3.3 vdc 5% 80ma (for fo < 160mhz), 120ma (for fo>160mhz) 40/60 % max. (see options) 400ps max 50 ? pecl voh = 2.35v typ (3.3vdd), 1.55v typ (2.5vdd) vol = 1.6v typ (3.3vdd), 0.8v typ (2.5vdd) 70 ppm min. (see options) 10ms max "1" (vih >= 0.7* vdd) or open: oscillation "0" (vil < 0.3* vdd) : no oscillation/hi z note: decoupling capacitor shall be connected between vdd and gnd for best performance and stability. 7.0 x 5.08 x 1.8mm
|
