r15 l olympian plug-in design l robust and compact l high flow unit with large valve and diaphragm l adjusting knob has snap-action lock l excellent flow and regulation characteristics technical data medium: compressed air only maximum inlet pressure: 20 bar operating temperature: ?0?c* to +80?c * consult our technical service for use below +2?c recommended regulated pressures ?? : 0,4 - 8 bar standard 0 - 4 bar optional 2 - 16 bar optional (only available with t-bar adjusting screw) ?? can be adjusted to zero bar outlet pressure and, generally, to pressures in excess of those specified. gauge ports: g 1 / 8 maximum flow with 10 bar inlet pressure, 6,3 bar outlet pressure and pressure drop of 1 bar: 180 dm 3 /s ordering information to order a standard redimount regulator, quote model number from table overleaf. for non-standard models substitute appropriate digits as instructed. materials aluminium alloy body. acetal resin adjusting knob (steel t-bar adjusting screw). synthetic rubber elastomeric materials. redimount regulator g 3 / 4 to g1 1 / 2 olympian 12 g 3 / 4 , g1, g1 1 / 4 ,g1 1 / 2 to iso 1179 accepts iso 228 (bs 2779) parallel or iso 7 (bs 21) taper connectors other port thread forms t-bar adjusting screw maximum pressure setting stop key lock adjusting knob port sizes alternative models 1/90 8.6. 041.01
8.6. 041.02 r15 typical performance characteristics standard redimount regulators 8 bar spring non-standard models for replacement regulators substitute ??and ??at the 4 th and 10 th digits respectively, e.g. r15- 0 00-rnl o . supplied without unidaptors as replacement units or for the build-up of combination units. please consult our technical service for further details. for optional 4 or 16 bar springs, substitute ??or ??respectively for ??at the 9 th digit, e.g. r15-600-rn f d.(16 bar spring only available with t-bar adjusting screw). for optional t-bar adjusting screw, substitute ??for ??at the 6 th digit, e.g. r15-60 1 -rnld. specify if unit is required complete with t15 shut-off valve fitted upstream. for details of shut-off valves see page 8.11. 021.01. for other options, please consult our technical service. accessories wall mounting bracket kit, see page 8.6. 041.03. pressure gauges, see page 8.11. 031.01. port size relieving weight kg non-relieving weight kg g 3 / 4 R15-600-RNLD 2,04 r15-600-nnld 2,14 g1 r15-800-rnld 2,04 r15-800-nnld 2,09 g1 1 / 4 r15-a00-rnld 2,08 r15-a00-nnld 2,11 g1 1 / 2 r15-b00-rnld 2,12 r15-b00-nnld 2,15
redimount regulator relieving R15-600-RNLD g 3 / 4 r15-800-rnld g1 r15-a00-rnld g1 1 / 4 r15-b00-rnld g1 1 / 2 non-relieving r15-600-nnld g 3 / 4 r15-800-nnld g1 r15-a00-nnld g1 1 / 4 r15-b00-nnld g1 1 / 2 * minimum clearance required to remove unit from yoke. g 1 8 / g 1 4 / 1g 1 2 / 1 54 , 190 (200 ) 222* 60 198 100 50 112 b bracket mounting bracket kit reference: g 3 / 4 18-001-979 g1 18-001-979 g1 1 / 4 18-001-978 g1 1 / 2 n/a 50 100 190* 208* 8,5 15 72 *if shut-off valve fitted add 46 mm to dimensions. r15 1/90 8.6. 041.03
8.6. 041.04 r15 spares kits type gasket kit repair kit relieving r15-gk r15-100r non-relieving r15-gk r15-100n warning these products are intended for use in industrial compressed air systems only. do not use these products where pressures and temperatures can exceed those listed under ?echnical data . before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult norgren martonair. through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. the system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. system designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. system designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products.
|
