hv x7r 500 v, 1 kv vishay bccomponents document number 28540 for technica l questions contact: cdc@vishay.com www.vishay.com revision 28-sep-06 45 ceramic disc capacitors class 2, 500 v, 1 kv (dc) general purpose features ? high capacitance in small size ? kinked (preferred) or straight leads ? lead (pb)-free available applications ? bypassing ? coupling ? resonant circuit design the capacitors consist of a ce ramic disc both sides of which are silver-plated. connection leads are made of tinned copper having a diameter of 0.6 mm. the capacitors have inward kinked leads with a spacing of 5 mm (0.200") or 7.5 mm (0.300") and a lead length from 4 to 30 mm. encapsulation is made of phenolic resin for 500 v (dc) and epoxy resin for 1 kv (dc). capacitance range: class 2, at 1 khz, 1 0.2 v (rms); 1000 to 4700 pf rated dc voltage: 500 v and 1 kv dielectric strength: 250 % of rated voltage for 500 v (dc) 200 % of rated voltage for 1 kv (dc) insulation resistance at 500 v (dc): 10 000 m tolerance on capacitance: 10 %; 20 % dissipation factor: class 2, 2.5 % temperature coefficients: class 2 x7r sectional specifications: class 2 iec 60 384-9, eia 198 climatic category: class 2 55/125/21 operating temperature range: class 2 - 55 to +125 c marking marking indicates capacitance value and tolerance in accordance with ?eia 198?. the capacitors meet the essent ial requirements of ?eia 198?. unless stated otherwise all electrical values apply at an ambient temperature of 25 3 c, at normal atmospheric conditions.
capacitors with 5 mm (0.20") lead spacing capacitors with 7.5 mm (0.30") lead spacing
rohs compliant e3
www.vishay.com for technical ques tions contact: cdc@vishay.com document number 28540 46 revision 28-sep-06 hv x7r 500 v, 1 kv vishay bccomponents ceramic disc capacitors class 2, 500 v, 1 kv (dc) general purpose notes 1. maximum thickness 3.5 mm. 2. sh = seated height. 3. lead style codes refer to inward kinked leads. other styles available on request. notes 1. maximum thickness 4.0 mm. 2. sh = seated height. 3. lead style codes refer to inward kinked leads. other styles available on request. note 1. the capacitors are supplied in bulk packaging (cardboard boxes), in tape on reel or in ammopack ordering information (preferred types), class 2, 500 v (dc), kinked c (pf) tol. (%) d max (mm) lead spacing f (mm) sh (2) (mm) clear text code 13 th digit: t = reel; u = ammo; 3 = bulk class 2 x7r 1000 10 6.5 5.0 4.0 h102k25x7rl6.j5r 1500 7.5 h152k29x7rl6.j5r 2200 8.5 h222k33x7rl6.j5r 3300 10.0 h332k39x7rl6.j5r 4700 12.0 7.5 h472k47x7rl6.j7r ordering information (preferred types), class 2, 1kv (dc), kinked c (pf) tol. (%) d max (mm) lead spacing f (mm) sh (2) (mm) clear text code 13 th digit: t = reel; u = ammo; 3 = bulk class 2 x7r 1000 10 6.5 5.0 4.0 h102k25x7rn6.j5r 1500 8.0 h152k31x7rn6.j5r 2200 9.0 h222k35x7rn6.j5r 3300 10.5 h332k41x7rn6.j5r 4700 12.0 7.5 h472k47x7rn6.j7r packaging d max mm size code packaging quantities bulk reel ammo 6.5 (0.25") 25 1000 2000 2000 7.5 (0.29") 29 8.5 (0.33") 33 10.0 (0.39") 39 11.0 (0.43") 43 12.0 (0.47") 47 -- 13.5 (0.53") 53 500 15.0 (0.59") 59 17.5 (0.69") 69
document number 28540 for technica l questions contact: cdc@vishay.com www.vishay.com revision 28-sep-06 47 hv x7r 500 v, 1 kv ceramic disc capacitors class 2, 500 v, 1 kv (dc) general purpose vishay bccomponents notes 1. cumulative pitch error: 1 mm/20 pitches. 2. obliquity maximum 3 . dimensions of tape symbol parameter dimensions (mm) nominal tolerance d body diameter 12.0 maximum - d lead diameter 0.6 0.05 p pitch between capacitors 12.7 1.0 p 0 feed-hole pitch 12.7 0.3; note 1 p plane deviation 1.0 maximum - p 1 feed-hole centre to lead centre 3.85 0.7; note 2 p 2 feed-hole centre to component centre 6.35 1.3; note 2 f lead spacing 5.0 + 0.6/- 0.4 h component alignment 0 1.0 w tape width 18.0 + 1.0/- 0.5 w 0 hold-down tape width 5.0 minimum - w 1 hole position 9.0 + 0.75/- 0.5 w 2 hold-down tape margin 3.0 maximum - h 0 height to seating plane 16.0 0.5 h 1 maximum component height 32.0 - e lead end protrusion 1.0 maximum - l maximum length of snipped lead 11.0 - d 0 feed-hole diameter 4.0 0.2 t total tape thickness 0.9 maximum ? t 1 maximum thickness of tape and wires 1.5 maximum ? kinked capacitors on tape, lead spacing 5.0 mm (0.2 inch) ? ? ?
www.vishay.com for technical ques tions contact: cdc@vishay.com document number 28540 48 revision 28-sep-06 hv x7r 500 v, 1 kv vishay bccomponents ceramic disc capacitors class 2, 500 v, 1 kv (dc) general purpose reel and tape data in millimeters reel with capacitors on tape ammopack with capacitors on tape 290 335 50
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
