? 2001 ixys all rights reserved 1 - 2 ixys reserves the right to change limits, test conditions and dimensions. i rms = 230a v rrm = 800 - 1800 v ac controller modules eco-pac 2 mmo 230 mlo 230 features ? thyristor controller for ac (circuit w1c acc. to iec) for mains frequency isolation voltage 3000 v~ planar glass passivated chips low forward voltage drop leads suitable for pc board soldering applications switching and control of single and three phase ac circuits light and temperature control softstart ac motor controller solid state switches advantages easy to mount with two screws space and weight savings improved temperature and power cycling high power density small and light weight symbol conditi ons maximum ratings i rms t c = 85c; 50-400 hz (per single controller) 230 a i trms 180 a i tavm t c = 85c; 180 sine 105 a i tsm t vj = 45c; v r = 0 v; t = 10 ms (50 hz), sine 2250 a t = 8.3 ms (60 hz), sine 2400 a t vj = 125c; v r = 0 v; t = 10 ms (50 hz), sine 2000 a t = 8.3 ms (60 hz), sine 2150 a i 2 dt t vj = 45c; v r = 0 v; t = 10 ms (50 hz), sine 25300 a 2 s t = 8.3 ms (60 hz), sine 23900 a 2 s t vj = 125c; v r = 0 v; t = 10 ms (50 hz), sine 20000 a 2 s t = 8.3 ms (60 hz), sine 19100 a 2 s (di/dt) cr t vj = 125c; repetitive, i t = 250 a 150 a/s f = 50 hz; t p = 200 s; v d = 2 / 3 v drm ; i g = 0.45 a non repetitive, i t = i tavm 500 a/s di g /dt = 0.45 a/ s; (dv/dt) cr t vj = 125c; v dr = 2 / 3 v drm 1000 v/s r gk = , method 1 (linear voltage rise) p gm t vj = 125c; t p = 30 ms 10 w i t = i tavm ;t p = 300 ms 5 w p gavm 0.5 w v rgm 10 v t vj -40 ... + 125 c t vjm 125 c t stg -40 ... + 125 c v isol 50/60 hz, rms t = 1 min 3000 v ~ i isol < 1 ma t = 1 s 3600 v ~ m d mounting torque (m4) 1.5 - 2.0 nm 14 - 18 lb.in. weight typ. 26 g preliminary data v rsm v rrm v dsm v drm type vv 900 800 mmo230 -08io7 mlo230 -08io7 1300 1200 mmo230 -12io7 mlo230 -12io7 1500 1400 mmo230 -14io7 mlo230 -14io7 1700 1600 mmo230 -16io7 mlo230 -16io7 1900 1800 mmo230 -18io7 mlo230 -18io7 124 data according to iec 60747 refer to a single thyristor unless otherwise stated
? 2001 ixys all rights reserved 2 - 2 component symbol conditions characteristic values min. typ. max. i d , i r t vj = 125c; v r = v rrm ; v d = v drm 5ma v t i t = 300 a; t vj = 25c 1.5 v v to for power-loss calculations only 0.8 v r t 2.4 m ? v gt v d = 6 v; t vj = 25c 1.5 v t vj = -40c 1.6 v i gt v d = 6 v; t vj = 25c 150 ma t vj = -40c 200 ma v gd t vj = 125c; v d = 2 / 3 v drm 0.2 v i gd t vj = 125c; v d = 2 / 3 v drm 10 ma i l t vj = 25c; t p = 10 ms 450 ma i g = 0.45 a; di g /dt = 0.45 a/ s i h t vj = 25c; v d = 6 v; r gk = 200 ma t gd t vj = 25c; v d = ? v drm 2 s i g = 0.45 a; di g /dt = 0.45 a/ s r thjc per thyristor; dc 0.26 k/w per module 0.13 k/w r thch per thyristor; dc 0,2 k/w per module 0,1 k/w d s creeping distance on surface 11.2 mm d a creeping distance in air 5.0 mm a max. allowable acceleration 50 m/s 2 dimensions in mm (1 mm = 0.0394") 124 mmo 230 mlo 230
|