v r stamp? with serial eeprom speech recognition module data sheet ? 2006 sensory inc. p/n 80-0274-E 1 description sensory?s vr stamp? simplifies the design of speech recognition products by integrating all key components into a convenient 40-pin dip footprint module. a low-noise audio channel and standardized footprint allow rapid prototyping, less debugging and shorter time to market. using the vr stamp? toolkit, application programs can be downloaded into the vr stamp. the vr stamp can then be removed from the module programmer board and plugged directly into the final product. in-circuit reprogramming is also supported. the vr stamp offers 24 i/o lines, as well as connections for a power, ground, microphone, speaker, and logic-level rs232 interface. features fluentchip? capabilities noise-robust speaker independent (si) and speaker dependent (sd) recognition many language models now available for international use high quality, 2.4-7.8 kbps speech synthesis & sound effects with sensory "sx" synthesis technology speaker verification word spot (svws) - noise robust voice biometric security 8 voice midi-compatible music synthesis audio wakeup from sleep touch tone (dtmf) output integrated solution rsc-4128 speech processor & 1mbit flash 128kb serial eeprom for data 14mhz (main) & 32khz (time keeping) clocks 24 i/o lines microphone preamplifier pulse width modulator (pwm) for speaker and optional dac output low power requirements v dd = 2.70v ? 3.6v i act = 26ma @ 3v (typ. for complete module) i sleep = <20ua @ 3v (typ. for complete module) vr stamp block diagram vr stamp power 1mb flash 128kb serial eeprom speaker (pwm) optional dac output io ports serial com mic program/ run vr stamp ic
vr stamp? module - serial eeprom data sheet 2 p/n 80-0274-E ? 2006 sensory inc. dc specifications for details, refer to rsc-4128 data sheet (80-0206). major components u3 rsc-4128 ic the rsc-4128 integrated circuit is the central speech processor. y1 crystal a 3.57 mhz crystal drives a 14.3mhz phase lock loop (pll ) in the rsc-4128 to create the system clock. timer 1 is used for all speech recognition functions, and should only be used by the applic ation programmer who is not using speech recognition. timer 3 is reserved for the application programmer. y2 crystal a 32.768 khz crystal establishes the frequency of timer 2 on the rsc-4128 ic. timer 2 is useful for timekeeping applications since it is not interrupted, unlike timer 1. r4 microphone source (gain) resistor a 1.2k on-board through-hole microphone source resistor is calibrated for use with a microphone with -44db sensitivity with 2.2k. this satisfies the -49db system gain. u2 1m bit flash memory this 1mb flash memory stores the application binary code. u4 128k bit serial eeprom memory this 128k bit serial eeprom is designed to store speech template s and application data.
data sheet vr stamp? module ? serial eeprom 3 p/n 80-0274-E ? 2006 sensory inc. vr stamp pin specification pin description pin description 1 microphone return (analog gnd) 40 gnd 2 microphone vdd 39 vdd 3 microphone input 38 p0.7 (serial eeprom sda) 4 microphone power 37 p0.6 5 dac output 36 p0.5 6 p2.0 35 p0.4 (serial eeprom scl) 7 p2.1 34 p0.3 8 p2.2 33 p0.2 (serial com -shutdown) 9 p2.3 32 p0.1 (serial com txd) 10 p2.4 31 p0.0 (serial com rxd) 11 p2.5 30 p1.7 12 p2.6 29 p1.6 13 p2.7 28 p1.5 14 p1.0 27 power down (pdn) 15 p1.1 26 -reset 16 p1.2 25 program/-run (-xm) 17 p1.3 24 pwm 1 (speaker output) 18 p1.4 23 pwm 0 (speaker output) 19 vdd 22 vdd 20 gnd 21 gnd note : p0.4 and p0.7 should be reserved for accessi ng sd/sv recognition data stored in serial eeprom. note : p0.0 and p0.1 are used for serial download of the binary. p0.1 is also the default pin for output of diagnostic information. another input pin needs to be a ssigned as a diagenable pin; at reset, diagnostic output is enabled if the pin is low and disabled if the pin is high. after reset, the pin can be used for other purposes. reset (-reset) input: a negative going pulse resets the vr stamp. program/-run (-xm) input: to run the application, leave this pin unconnected. to download application binary, pull this pin high with a 100 ohms resistor. power down (pdn) output: the power down pin is an active high output, and it is controlled by the application firmware. general purpose i/o bidirectional: the vr stamp has 24 general purpose i/o pi ns. each line can be programmed as an input with a weak pull-up resistor, input with a strong pull-up resist or, input without pull-ups, or as an output. for more details, refer to the rsc-4128 data sheet (80-0206).
vr stamp? module - serial eeprom data sheet 4 p/n 80-0274-E ? 2006 sensory inc. microphone ports input: the vr stamp is designed so that you can use the on-board 1.2k microphone sour ce resistor or external custom microphone source resistor. us e the on-board microphone resistor if the microphone sens itivity provides -49db system gain with 1.2k. use the external microphone source resistor otherwise. for more information on microphones, refer to design note - selecting a microphone (80-0259). note: sleep current is 100ua (typ.) with a microphone. speaker output (pwm0, pwm1) output: pwm ports can be directly connected to the speaker. dac output output: an optional dac output for the speaker is provided. to use dac output, you need to provide the external audio amplifier. refer to page 4 of the module programmer board schematic (70-0069). vr stamp schematic refer to: (70-0066). developing vr stamp applications what you can develop with the vr stamp: speaker independent recognition speaker dependent recognition speaker verification what you can not develop with the vr stamp: record and playback feature sample programs sample programs in the fluentchip? technology library are a great place to start. please refer to the rsc-4x module programmer board manual (80-0294) for the complete list of supported samples. creating si recognition sets and speech files for creating speaker independent recognition sets, use ?quick t2si?-lite (pat. pending)? for creating speech files, use ?quicksynthesis 4??
data sheet vr stamp? module ? serial eeprom 575 n. pastoria ave., sunnyvale, ca 94085 tel: (408) 625-3300 fax: (408) 625-3350 ? 2006 sensory, inc. all right reserved. sensory is registered by the u.s. patent and trademark office. all other trademarks or registered trademarks are the property of their respective owners. www.sensoryinc.com the interactive speech? product line the interactive speech line of ics and software was developed to ?bring life to products? through advanced speech recognition and audio technologies. the interactive speech prod uct line is designed for cost-sensitive consumer electronic applications such as home electronics, hom e automation, toys, and personal communication. the product line includes the award-winning rsc-4x general-purpos e microcontrollers and tools, the vr stamp? 40 pin dip module and tools, the sc series of speech and music synthesis microcontrollers. our su ite of software development kits are designed to run on non- sensory processors and dsp?s, and sup port most popular operating systems. rsc microcontrollers and tools the rsc product line contains low-cost 8-bit speech-optimized microcontrollers designed for use in consumer electronics. all members of the rsc family are fully integrated and include a/d, pre-amplifier, d/a, rom, and ram circuitry. the rsc family can perform a full range of speech/audio functions in cluding speech recognition, speaker verification, speech and music synthesis, and voice record/playback. the family is supported by a complete suite of evaluation tools and development kits. speech recognition modules and tools the vr stamp? is a complete voice recognition module based aroun d the rsc-4x and is ideal for fast design and easy production. a low-noise audio channel and standardized 40 pin dip footprint allow rapid prot otyping, less debugging and shorter time to market. the vr stamp toolkit includes everything needed to get started today, incl uding vr stamps, module programming board, sample applications, and a complete set of development tools featuring the phyton ide and limited-life c compiler, quicksynthesis? 4 and quick t2si-lite? speech tools. sc microcontrollers and tools the sc-6x product line features the highest quality speech synthesis ics at the lowest data rate in the industry. the line includes a 12.32 mips processor for high-quality low data-rate speech compression and midi music synthesis, with plenty of power left over for other processor and control functions. me mbers of the sc-6x line can store as much as 37 minutes of speech on chip and include as much as 64 i/o pins for external interfacing. integrating this broad range of features onto a single chip enables developers to create products with high qual ity, long duration speech at very competitive price points. fluentsoft? technology fluentsoft? recognizer is the engine powering the fluentsoft ? sdk. it provides a noise robust, large vocabulary speaker independent solution with continuous digit recognition and word spotting capabilities. this small footprint software recognizes up to 5,000 words, runs on non-sensory processors includin g intel xscale, ti omap, and arm9 platforms, and supports operating systems such as ms windows, linux and symbian. 3dmsg? technology 3dmsg?s animated speech technology offers animated avatars with advanced speech recognition and synthesis capabilities for use in smart phones, language trainers, and kiosk applicat ions. facial expressions can be configured for different emotions and lip synchronizati on can be automatically driven from voice or text data. visit www.3dmsg.com for more information. important notices: sensory incorporated (sensory, inc.) reserves the right to make changes, without notice, including circuits, standard cells, an d/or software, described or contained herein in order to improve design an d/or performance. sensory, inc. assume s no responsibility or liability for the u se of any of these products, conveys no license or title under any patent, copyright, or mask wo rk right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringemen t, unless otherwise specified. applications that are described h erein for any of these products are for illustrative purposes only. sensory, inc. makes no represen tation or warranty that suchapplications will be suitable for t he specified use without further testing or modification . safety policy: sensory, inc. products are not designed for use in any systems where malfunction of a sensory, inc. product can reasonably be e xpected to result in a personal injury, including but not limited to life support appliances and devic es. sensory, inc. customer s using or selling sensory inc orporated products for use in such applications do so at their own risk and agree to fully indemnif y sensory, inc. for any damages resulting from such improper us e or sale.
|
