View MGDB-04_2178964.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

hi-rel dc/dc converter mgdm-04 : 4w power ? 28 vdc input compliant with mil-std-704 d/e? low profile : 0,3 ?? (7.5mm) ? nominal power of 4w without derating? wide temperature range : -40c/+105c case ? soft start ? galvanic isolation 1.500 vdc ? integrated lc emi filter ? permanent short circuit protection ? standard pin out dil24 9 pins ? inhibit function ? no optocoupler for high reliability ? rohs or leaded process option gaia converter fc97-008.01/10 revision o ? redefining the source of power 1-general single , bi & t riple outputs metallic case - 1.500 vdc isolation hi-relgrade for locations, phone, fax, e-mail see back cover 2-product selection input v oltage range b : 3.3 vdcc : 5 vdc or +/-5vdc e : 12 vdc or +/-12vdc f : 15 vdc or +/-15vdc cf : 5 vdc and +/-15 vdc output the mgdm-04 series is a full family of high per-formance and low profile dc/dc power modules designed for aerospace, military and high-end industrial applications. these modules use a high frequency fixed switching technic at 48 0khz pr ovi din g e x cellen t r eli ability , low n oise characteristics, high power density and a low pro-file package. standard models are available with nominal input voltages as 5, 12 or 28 volts in range of 4,5-5,5 , 9-36 or 16-40 volts. the series include single, bi and triple output voltage choices of 3.3, 5, 12, 15, +/-5, +/-12 or +/-15 volts. no external heatsink is required for the mgdm-04 series to supply 4w output power over the case temperature range of -40c up to 105c. all the modules are designed with lc network filters to minimize reflected input current ripple and output voltage ripple. the modules include a soft-start , a permanent short circuit protection and an output overvoltage protection to ensure efficient module protection s . the soft-start allows current limitation andeliminates inrush current during start-up. the short circuit protection completely protects the module against short-circuits of any duration by a shut-down and restores to normal when the overload is removed. the design has been carried out with surface mount components and is manufactured in a fully autom ated pr ocess to gu ar an tee hi gh qu ality . each module is tested and burned in with a gaiac onverter automated test equipment before and after encapsulation. the modules are potted witha bi-component thermal conductive compound and packaged in a metallic case to ensure the module?s integrity under high environmental conditions. options : suffix : /t : option for -55c start up operating temperature nothing : rohs process /s : option for screening and serialization -l : leaded process (available in n. america) permanent c : 4,5-5,5 vdch : 9-36 vdc j : 16-40 vdc * consult factory transient n/a 40 vdc/100 ms *50 vdc/100 ms * 4 single output model : mgds - 04 - input output option suffix / bi output model : mgdb - 04 - input output option suffix / triple output model : mgdt - 04 - input output option suffix /
for locations, phone, fax, e-mail see back cover 2 hi-relgrade mgdm-04 series gaia converter fc97-008.01/10 revision o ? 4 2- product selection (continued) current 1a 800 ma330 ma 260 ma +/- 400 ma+/- 165 ma +/- 130 ma 1a 800 ma330 ma 260 ma +/- 400 ma+/- 165 ma +/- 130 ma 1a 800 ma330 ma 260 ma +/- 400 ma+/- 165 ma +/- 130 ma 500 & +/-50 ma reference mgds-04-c-b mgds-04-c-cmgds-04-c-e mgds-04-c-f MGDB-04-c-cMGDB-04-c-e MGDB-04-c-f mgds-04-h-b mgds-04-h-cmgds-04-h-e mgds-04-h-f MGDB-04-h-cMGDB-04-h-e MGDB-04-h-f mgds-04-j-b mgds-04-j-cmgds-04-j-e mgds-04-j-f MGDB-04-j-cMGDB-04-j-e MGDB-04-j-f mgdt-04-j-cf output 3,3 vdc 5 vdc 12 vdc15 vdc +/- 5 vdc +/- 12 vdc+/- 15 vdc 3,3 vdc 5 vdc 12 vdc15 vdc +/- 5 vdc +/- 12 vdc+/- 15 vdc 3,3 vdc 5 vdc 12 vdc15 vdc +/- 5 vdc +/- 12 vdc+/- 15 vdc 5 & +/-15 vdc input range 4,5-5,5 vdc4,5-5,5 vdc 4,5-5,5 vdc 4,5-5,5 vdc 4,5-5,5 vdc 4,5-5,5 vdc 4,5-5,5 vdc 9-36 vdc9-36 vdc 9-36 vdc 9-36 vdc 9-36 vdc 9-36 vdc 9-36 vdc 16-40 vdc16-40 vdc 16-40 vdc 16-40 vdc 16-40 vdc 16-40 vdc 16-40 vdc 16-40 vdc options /t , /s/t , /s /t , /s /t , /s /t , /s /t , /s /t , /s /t , /s /t , /s /t , /s /t , /s /t , /s /t , /s /t , /s /t , /s /t , /s /t , /s /t , /s /t , /s /t , /s /t , /s /t , /s suffix -, -l-, -l -, -l -, -l -, -l -, -l -, -l -, -l -, -l -, -l -, -l -, -l -, -l -, -l -, -l -, -l -, -l -, -l -, -l -, -l -, -l -, -l converter selection chart mgd s - 04 - j - c / t - l number of outputs :s : single output b : bi ouput t : triple output input voltage range : c : 4,5-5,5 vdc h : 9-36 vdc j : 16-40 vdc output voltage : see table page 1 option : /t : -55c start up operation /s : screening & serialization (consult application note ?screening grades?) suffix :nothing : rohs process -l : leaded process (available in n. america)
for locations, phone, fax, e-mail see back cover 3 hi-relgrade mgdm-04 series gaia converter fc97-008.01/10 revision o ? 4 3- electrical specificationsdata are valid at +25c, unless otherwise specified. parameter conditions limit or typical units single output mgds-04 04 - c 04 - h 04 - j input nominal input voltage full temperature range nominal v dc 5 20 28 permanent input voltage range (ui) full temperature range min. - max. vdc 4,5-5,5 9-36 16-4 0 transient input voltage full load (consult factory) m aximum vdc/s / 40/0,1 50/0,1 start up input voltage full load minimum vdc 4,3 8,5 15,5 start up time ui nominal nominal output full load : resistive maximum ms 200 200 200 reflected ripple current ui nominal, full load at switching freq. bw = 20mhz maximum mapp 50 50 30 input current in short circuit mode (average) ui nominal short-circuit maximum ma 50 30 30 no load input current ui nominal no load maximum ma 50 30 30 input current in inhibit mode inhibit maximum ma 5 5 5 output output voltage full temperature range ui min. to max. 75% load nominal nominal nominal nominal vdc vdc vdc vdc 3,3 5 12 15 3,3 5 12 15 3,3 5 12 15 set point accuracy ambient temperature : +25c ui nominal, 75% load maximum % +/- 2 +/- 2 +/- 2 output power full temperature range ui min. to max. maximum w 4 4 4 output current 3,3v output 5v output 12v output 15v output full temperature range ui min. to max. maximum maximum maximum maximum ma ma ma ma 1.000 800 330 260 1.000 800 330 260 1.000 800 330 260 ripple output voltage * 3,3v and 5v output 12v output 15v output ui nominal full load bw = 20mhz maximum maximum maximum mvpp mvpp mvpp 40 50 60 40 50 60 40 50 60 line regulation ui min. to max. full load maximum % +/- 0,5 +/- 0,5 +/- 0,5 load regulation ** ui nominal 25% to full load maximum % +/- 2 +/- 2 +/- 2 efficiency ui nominal full load typical % see on page 6 maximum admissible capacity load 3,3v and 5v output 12v and 15v output ui nominal full load per output maximum maximum f f 1.000 47 1.000 47 1.000 47 note * : the ripple output voltage is the periodic ac component imposed on the output voltage, an aperiodic and random component (noise) has also to be considered. thisnoise can be reduced by adding an external capacitor (typically 10nf/rated voltage depending on isolation requirement) connected between the pin gin and the pin gout o f the converter . this capacitor should be layed-out as close as possible from the converter . note ** : for load regulation characteristics from 0% to full load, please see page 6.
for locations, phone, fax, e-mail see back cover 4 hi-relgrade mgdm-04 series gaia converter fc97-008.01/10 revision o ? 4 3- electrical specifications (continued)data are valid at +25c, unless otherwise specified. parameter conditions limit or typical units bi output MGDB-04 04 - c 04 - h 04 - j input nominal input voltage full temperature range nominal v dc 5 20 28 permanent input voltage range (ui) full temperature range min. - max. vdc 4,5-5,5 9-36 16-4 0 transient input voltage full load (consult factory) m aximum vdc/s / 40/0,1 50/0,1 start up input voltage full load minimum vdc 4,3 8,5 15,5 start up time ui nominal nominal output full load : resistive maximum ms 200 200 200 reflected ripple current ui nominal, full load at switching freq. bw = 20mhz maximum mapp 50 50 30 input current in short circuit mode (average) ui nominal short-circuit maximum ma 50 30 30 no load input current ui nominal no load maximum ma 50 30 30 input current in inhibit mode inhibit maximum ma 5 5 5 output output voltage full temperature range ui min. to max. 75% load nominal nominal nominal vdc vdc vdc +/- 5 +/- 12 +/- 15 +/- 5 +/- 12 +/- 15 +/- 5 +/- 12 +/- 15 set point accuracy ambient temperature : +25c ui nominal, 75% load maximum % +/- 2 +/- 2 +/- 2 output power full temperature range ui min. to max. maximum w +/- 2 +/- 2 +/- 2 output current +/- 5v output +/- 12v output +/- 15v output full temperature range ui min. to max. maximum maximum maximum ma ma ma +/- 400 +/- 165 +/- 130 +/- 400 +/- 165 +/- 130 +/- 400 +/- 165 +/- 130 ripple output voltage * 5v output 12v output 15v output ui nominal full load bw = 20mhz maximum maximum maximum mvpp mvpp mvpp 40 50 60 40 50 60 40 50 60 line regulation ui min. to max. full load maximum % +/- 0,5 +/- 0,5 +/- 0,5 load regulation ** ui nominal 25% to full load maximum % +/- 2 +/- 2 +/- 2 cross load output regulation ui nominal + vout nominal load - vout from 25% to full load maximum % +/- 0,5 +/- 0,5 +/- 0,5 efficiency ui nominal full load typical % see on page 6 maximum admissible capacity load 5v output 12v and 15v output ui nominal full load per output maximum maximum f f 470 22 470 22 470 22 note * : the ripple output voltage is the periodic ac component imposed on the output voltage, an aperiodic and random component (noise) has also to be considered. thisnoise can be reduced by adding an external capacitor (typically 10nf/rated voltage depending on isolation requirement) connected between the pin gin and the pin gout o f the converter . this capacitor should be layed-out as close as possible from the converter . note ** : for load regulation characteristics from 0% to full load, please see page 6.
for locations, phone, fax, e-mail see back cover 5 hi-relgrade mgdm-04 series gaia converter fc97-008.01/10 revision o ? 4 3- electrical specifications (continued)data are valid at +25c, unless otherwise specified. parameter conditions limit or typical units triple output mgdt-04- j input nominal input voltage full temperature range nominal v dc 28 permanent input voltage range (ui) full temperature range min. - max. vdc 16-40 transient input voltage full load (consult factory) m aximum vdc/s 50/0,1 start up input voltage full load minimum vdc 15,5 start up time ui nominal nominal output full load : resistive maximum ms 200 reflected ripple current ui nominal, full load at switching freq. bw = 20mhz maximum mapp 30 input current in short circuit mode (average) ui nominal short-circuit maximum ma 30 no load input current ui nominal no load maximum ma 30 input current in inhibit mode inhibit maximum ma 5 output output voltage full temperature range ui min. to max. 75% load nominal vdc 5 & +/- 15 set point accuracy ambient temperature : +25c ui nominal, 75% load maximum % +/- 2 output power full temperature range ui min. to max. maximum w 2 & +/- 1 output current 5v & +/- 15v output full temperature range ui min. to max. maximum ma 500 & +/- 50 ripple output voltage * 5v output 15v output ui nominal full load bw = 20mhz maximum maximum mvpp mvpp 40 60 line regulation ui min. to max. full load maximum % +/- 0,5 load regulation ** ui nominal 25% to full load maximum % +/- 2 cross load output regulation ui nominal + vout nominal load - vout from 25% to full load maximum % +/- 0,5 efficiency ui nominal full load typical % 80 maximum admissible capacity load 5v output 15v output ui nominal full load per output maximum maximum f f 220 47 note * : the ripple output voltage is the periodic ac component imposed on the output voltage, an aperiodic and random component (noise) has also to be considered. thisnoise can be reduced by adding an external capacitor (typically 10nf/rated voltage depending on isolation requirement) connected between the pin gin and the pin gout o f the converter . this capacitor should be layed-out as close as possible from the converter . note ** : for load regulation characteristics from 0% to full load, please see page 6.
for locations, phone, fax, e-mail see back cover 6 hi-relgrade mgdm-04 series gaia converter fc97-008.01/10 revision o ? 4 3- electrical char acteristics (continued) input 5v 1 2 3 4 output p ower (w) (mgds-04-c-e m od ule) figur e 2 : t ypical efficienc y v er sus load at nominal input effi ci en cy (%) 8380 77 74 71 68 65 input 5v 1 2 3 4 output p ower (w) (mgds-04-c-f m od ule) figur e 3 : t ypical efficienc y v er sus load at nominal input effi ci en cy (%) 8380 77 74 71 68 65 input 16v input 40v input 28v 1 2 3 4 output p ower (w) (mgds-04-j-e m od ule) figur e 8 : t ypical efficienc y v er sus load at v arious input effi ci en cy (%) 8481 78 75 72 69 66 input 16v input 40v input 28v 1 2 3 4 output p ower (w) (mgds-04-j-f m od ule) figur e 9 : t ypical efficienc y v er sus load at v arious input effi ci en cy (%) 8481 78 75 72 69 66 output current (ma) (mgds-04-j-f module) figur e 12 : t ypical load r egulation char acteristics at nominal input output voltag e (vdc) output current (ma) (mgds-04-j-e module) figur e 11 : t ypical load r egulation char acteristics at nominal input output voltag e (vdc) 1 2 3 4 output p ower (w) (mgds-04-c-c m od ule) figur e 1 : t ypical efficienc y v er sus load at nominal input effi ci en cy (%) 8380 77 74 71 68 65 input 5v input 18v input 36v input 9v 1 2 3 4 output p ower (w) (mgds-04-h-c m od ule) figur e 5 : t ypical efficienc y v er sus load at v arious input effi ci en cy (%) 8380 77 74 71 68 65 1 2 3 4 output power (w) (mgds-04-h-e module) figur e 6 : t ypical efficienc y v er sus load at nominal input effi ci en cy (%) 8380 77 74 71 68 65 input 18v input 36v input 9v 1 2 3 4 output p ower (w) (mgds-04-j-c m od ule) figur e 7 : t ypical efficienc y v er sus load at v arious input effi ci en cy (%) 8380 77 74 71 68 65 input 28v input 40v input 16v input 9v input 18v input 36v 1 2 3 4 output power (w) (mgds-04-h-b module) figure 4 : typical efficiency versusload at various input efficiency (%) 8380 77 74 71 68 65 output current (ma) (mgds-04-j-c module) output voltag e (vdc) 0 50 100 150 200 250 300 350 11,8 12 12,2 12,4 12,6 12,8 13 13,2 13,4 0 100 200 300 400 500 600 700 800 4,9 5 5,1 5,2 5,3 5,4 5,5 5,6 0 50 100 150 200 250 300 14,8 15 15,2 15,4 15,6 15,8 16 16,2 16,4 figur e 10 : t ypical load r egulation char acteristics at nominal input
for locations, phone, fax, e-mail see back cover 7 hi-relgrade mgdm-04 series gaia converter fc97-008.01/10 revision o ? 4 4- switching frequency6- protection functions characteristics protection device recovery limit or ty pical specifications output short circuit protection (scp) hiccup circuitry with auto-recovery automatic recovery permanent see section 11 output overvoltage protection (ovp) zener clamp / maximum maximum maximum maximum for 3.3v : 4v for 5v : 6v for 12v : 14v for 15v : 17v 7- reliability data parameter conditions limit or typical specifications switching frequency full temperature range ui min. to max. no load to full load nominal, fixed 480 khz for single & bi output models 400 khz for triple output models 5- isolation characteristics conditions temperature specifications mean time between failure (mtbf) according to mil-hdbk-217f ground fixed (gf) case at 40c case at 85c 1.650.000 hrs 645.000 hrs airborne, inhabited, cargo (aic) case at 40c case at 85c 900.000 hrs 350.000 hrs mean time between failure (mtbf) according to iec-62380-tr avionics military cargo / consult factory parameter conditions limit or typical specifications electric strength test voltage input to output minimu m 1.500 vdc / 1 min electric strength test voltage between outputs (for dual and triple outputs) output to output minimum no isolation isolation resistance 500 vdc minimum 100 mohm
for locations, phone, fax, e-mail see back cover 8 hi-relgrade mgdm-04 series gaia converter fc97-008.01/10 revision o ? 4 8-1 module compliance with mil-std-461c/d/e standardst o m eet th e latest u s military stan d ar ds mil-std-461d/e (an d also th e mil-std-461c) r equir em en ts an d in parti cular th e conducted noise emission ce102 (and also ce03) requirements, ga?a converter can propose a stand-alone ready-to-use emifilter module. this emi filter module has to be used together with a common mode noise capacitance c c (10nf/rated voltage depending on isolation requirement) connected between gin and gout.emi filter m od ule r efer en ce : fgds-2a -50v . please consult emi filter datasheet for further details. 8 - electromagnetic interference electromagnetic interference requirements according to mil-std-461c/d/e standards can be easily achieved as indicated inthe following section. the following table resumes the different sections covered by these standards. standard requirements mil-std-461c standard mil-std-461d/e standard compliance with gaia converter module & common mode capacitance conducted emission (ce) : low frequency high frequency ce 01 ce 03 ce 101 ce 102 compliant module stand-alone compliant with additionnal filter conducted susceptibility (cs) : low frequency high frequency cs 01 cs 02 cs 101 cs114 compliant with additionnal filter compliant with additionnal filter radiated emission (re) : magnetic field electrical field re 01 re 02 re 101 re 102 compliant module stand-alone compliant module stand-alone radiated susceptibility (rs) : magnetic field electrical field rs 01 rs 03 rs 101 rs 103 compliant module stand-alone compliant module stand-alone applicability h, j input module h, j input module see emi datasheet mgdm-series go vo gi vi cc emi input filter go vo gi vi
for locations, phone, fax, e-mail see back cover 9 hi-relgrade mgdm-04 series gaia converter fc97-008.01/10 revision o ? 4 9- thermal characteristics characteristics conditions limit or typical performanc es operating ambient temperature range at full load ambient temperature * minimum maximum - 40c + 85c operating case temperature range at full load case temperature minimum maximum - 40c +105c storage temperature range non functionning minimum maximum - 55c + 125c thermal resistance rth case to ambient in free air natural convection typical 20c /w note * : the upper temperature range depends on configuration, the user must assure a max. case temperature of + 105c. 10 100 30 110 80 70 60 90 20 40 50 25% 75%50% 100% power (w) temperature ( ?c) full load ambient temperature without derating : 85?c maximum case temperature : 105?c natural convection operation area additionnal cooling operation area maximum storage temperature : 125?c the mgdm-04 series operating case temperature must not exceed 105c. the maximum ambient temperature admissible for the dc/dc converter corresponding to the maximum operating case temperature of 105c depends on the ambientairflow , th e m oun tin g/ori en tati on, th e coolin g featur es an d th e power dissipated . t o calculate a m axim um ad missible ambi en t temper atur e th e f ollowin g m eth od can be used . kn owin g th e m axim um case tempar atur e t case = 105c o f th e m od ule , th e power used p out an d th e effi ci en c y : ? determine the power dissipated by the module pdiss that should be evacuated : pdiss = pout(1/ ? ? - 1) ? determine the maximum ambient temperature : t a = 105c - rth x pdiss where rth is the thermal resistance from the case to ambient . the previous thermal calculation shows two areas of operation : ? a normal operation area in a free natural ambient convection (grey area in this following graph),? an area with cooling features (air flow or heatsink) ensuring a maximum case temperature below the maximum operating case temperature of 105c (white area in the following graph).
for locations, phone, fax, e-mail see back cover 10 hi-relgrade mgdm-04 series gaia converter fc97-008.01/10 revision o ? 4 10- environmental qualificationsthe modules have been subjected to the following environmental qualifications. characteristics conditions severity test procedure climatic qualifications life at high temperature duration temperature / status of unit test d : 1.000 hrs @ 105c case, unit operating @ 125c ambient, unit not operating mil-std-202g method 108a altitude altitude level c duration climb up stabilization status of unit 40.000 ft@-55c 30 min. 1.000 ft/min to 70.000 f@-55c, 30 min. unit operating mil-std-810e method 500.3 humidity cyclic number of cycle cycle duration relative humidity variation temperature variation status of unit 10 cycle i : 24 hrs 60 % to 88 % 31c to 41c unit not operating mil-std-810e method 507.3 humidity steady damp heat temperature duration status of unit 93 % relative humidity 40c 56 days unit not operating mil-std-202g method 103b salt atmosphere temperature concentration nacl duration status of unit 35c 5 % 48 hrs unit not operating mil-std-810e method 509.3 temperature cycling number of cycles temperature change transfert time steady state time status of unit 200 -40c / +85c 40 min. 20 min. unit operating mil-std-202a method 102a temperature shock number of shocks temperature change transfert time steady state time status of unit 100 -55c / +105c 10 sec. 20 min. unit not operating mil-std-202g method 107g mechanical qualifications vibration (sinusoidal) number of cycles frequency / amplitude frequency / acceleration duration status of unit 10 cycles in each axis 10 to 60 hz / 0.7 mm 60 to 2000 hz / 10 g 2h 30 min. per axis unit not operating mil-std-810d method 514.3 shock (half sinus) number of shocks peak acceleration duration shock form status of unit 3 shocks in each axis 100 g 6 ms 1/2 sinusoidal unit not operating mil-std-810d method 516.3 bump (half sinus) number of bumps peak acceleration duration status of unit 2000 bumps in each axis 40 g 6 ms unit not operating mil-std-810d method 516.3
for locations, phone, fax, e-mail see back cover 11 hi-relgrade mgdm-04 series gaia converter fc97-008.01/10 revision o ? 4 11- description of protections11-1 output short circuit protection (scp) the short circuit protection device protects the moduleagainst short circuit of any duration and restores the mo- dule to normal operation when the short circuit is removed. it operates in ?hiccup? mode by testing periodically if an overload is applied (typically every 200ms recovery time). the overload detection threshold is typically 200% of maxi- mum current with a detection time lower than 5ms. 11-2 output overvoltage protection (ovp) the output overvoltage protection device protects external components against high voltage or possible overvoltages which can be supplied by the module (i.e in case of internal failure). it consists of a zener diode clamping the output voltage; under worst case conditions this zener diode will short-circuit. the output voltage protection is not designed to withstand externally applied output overvoltages to protect the mo- dule itself. 12- description of functions 12-1 on/off function the control pin 20 (on/off) can be used for applications requiring on/off operation. by using an open collector command with a transistor q referenced to the common terminal (gi) : ? a logic pulled low (<0.2v@1ma, referenced to gi)on pin 20 disables the converter ? no connection or high impedance on pin 20 enables th e converter . by releasing the on/off function, the converter will restartwithin the start-up time specifications given in table page 3. for further details please consult ??logic on/off?? applica- tion note. gi on/off command time recovery time detection time recovery time x 100 vo (%)
for locations, phone, fax, e-mail see back cover 12 hi-relgrade mgdm-04 series gaia converter fc97-008.01/10 revision o ? 4 13- application notes 13-1 connection of outputs in seriesany of the bi output converters can be configured to produce an output of 10v (+/-5 output models), 24v (+/-12v out- put models), or 30v (+/-15v output models) by connecting the load across the output (+) and the output (-) witheither output grounded, and leaving the common pin floating. 13-2 connection of modules in series the output of single output units can be connected in series without any precautions to provide higher output voltage level. nevertheless, gaia converter recommends to protect each individual output by a low power shottky diode rated with the maximum current of the converter to avoid reverse polarity at any output. reverse polarity may occur at start up if the output volta- ges do not rise at the same time. 13-3 connection o f modules in p ar allel several converters with equal output voltage can beconn ected in par allel to in cr ease power . n everth eless som e cares have to be taken in particular as the output voltageof each converter is slightly different, when paralleling, the converter with the highest output voltage will source the most current. however the gaia converter modules are designed with a ?soft?? output voltage versus current characteristic. this causes the output voltage of each converter to automatically adjust downward as its current increases so each converter very approximately shares the total output current. it is important that each converter has approximately the same impedance between their output and the common load. go +vo -vo gi vi 2 x vo go vo gi vi go vo gi vi vo go vo gi vi go vo gi vi 2 x vo
for locations, phone, fax, e-mail see back cover 13 hi-relgrade mgdm-04 series gaia converter fc97-008.01/10 revision o ? 4 14- dimensions15- materials case : metallic black anodized coating pins : plated with pure matte tin over nickel underplate 16- product marking upper face : company logo, location of manufacturing. side face : module reference : mgdx-04-?x?-?y?. date code : year and week of manufacturing, suffix, /option. 17- connections dim en si on ar e given in mm (in ch es). t oler an ce : +/- 0,2 mm (+/- 0.01 ?) unless oth erwise in di cated . weight : 10 grams (0.3 ozs) max. 24 23 1 2 15 10 11 13 24 23 1 2 14 11 13 12 bi output model triple output model bottom view 24 23 1 2 14 11 13 12 single output model 15 20 20 20 pin dimensions : o 0,53 mm (0.02 ?) 32,00 (1.25") 27,94 (1.10") 7,00 (0.275") 2,54 (0.10") 1,90 (0.07") 5 min (0,20") 15,24 (0.60") 19,30 (0.75") 7,50 (0.295") 10,16 (0.40") for triple output models outline dimensions are : 35 mm (1.4??) x 20 mm (0.8??) x 10,50 mm (0.4??) pin single bi triple 1 + input (vi) + input (vi) + input (vi) 2 + input (vi) + input (vi) + input (vi) 10 / common (go) / 11 common (go) common (go) common (go) 12 common (go) / common (go) 13 output (vo) output - (-vo) output 2- (-v2) 14 output (vo) / output 1 (v1) 15 / output + (+vo) output 2+(+v2) 20 on/off on/off on/off 23 - input (gi) - input (gi) - input (gi) 24 - input (gi) - input (gi) - input (gi)
inf orm ati on given in this d atash eet is beli eved to be accur ate an d r eli able . h owever , no r espon sibility is assum ed f or th e con sequen ce o f its use n or f or an y infrin g em en t o f paten ts or oth er ri gh ts o f thir d parti es whi ch m ay r esult fr om its use . th ese pr od u cts ar e sold only accor din g to g aia converter g ener al con diti on s o f sale , unless oth erwise confirm ed by writin g. specifi cati on s subject to chan g e with out n otice . printed in france by gaia converter fc97-008.01/10 revision o graphisme : philippe clicq repr esen ted by : for m or e d etailed specifi cati on s an d appli cati on s inf ormati on, con tact : international headquarters ga?a converter - france zi de la morandire 33185 le haillan - france t el. : + (33)-5-57-92-12-80 fax : + (33)-5-57-92-12-89 north american headquarter s ga?a converter canada, inc4038 le corbusier la v al, quebec - canad a h7l 5r2 t el. : (514)-333-3169 fax : (514)-333-4519

▲Up To Search▲

Price & Availability of MGDB-04

	To Download MGDB-04 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .