lC1 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock models available pm series 5 tumbler miniature snap-in switchlocks features/benefits ? international agency listings ? snap-in mounting ? w ire lead terminations available ? 5 t umbler lock with positive detent typical applications ? computers ? point-of-sale terminals ? marine equipment specifications contact rating: q contact material: 4 amps @ 125 v ac or 28 v dc; 2 amps @ 250 v ac (ul/csa); 4 amps @ 125 v ac,2 amps @ 250 v ac, t65 (vde). see page m-33 for additional ratings. electrical life: 10,000 make-and-break cycles at full load. contact resistance: below 10 m typ. initial @ 2-4 v dc, 100 ma, for both silver and gold plated contacts. insulation resistance: 10 9 min. dielectric strength: 1,000 vrms min. @ sea level. indexing: 90o2 positions. materials lock: 6/6 nylon with matte finish (ul 94v-2), color black, 5 tumbler, single bitted lock with integral detent mechanism. keys: two nickel plated brass keys with black plastic head, other colors available. switch housing: 6/6 nylon (ul 94v-2). contacts & terminals: q contact material: copper, silver plated. see page l-33 for additional contact materials. note: any models supplied with q or b contact material ar e rohs compliant. note: specifications and materials listed above ar e for switchlocks with standard options. for information on specific and custom switchlocks, consult customer service center. build-a-switch to order, simply select desired option from each category and place in the appropriate box. available options are shown and described on pages lC2 and l--3. for additional options not shown in catalog, consult customer service center. switch and lock function pm0613 sp , 90o index, keypull pos. 1 pm061u sp, 90oindex, keypull pos. 1 & 3 lock color 2 black key color 2 black keying e t wo nickel pla ted brass keys with insert molded plastic head terminations 05 quick connect wc wire lead contact material q silver b gold lock type b 5 tumbler lock with detent lock finish m plastic lock with matte finish lock style k cone shaped facing
lC 32 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock pm series 5 tumbler miniature snap-in switchlocks switch and lock function keying lock type = detent position (90 o ) = key pull possible in these positions. = stop po sitions legend keying key color lock type lock color b 5 tumbler lock with detent e two nickel plated brass keys with insert molded plastic head 2 black lock color option code 2 black key color option code note: molded plastic head color is black, standard. for more than one key code, r eplacement keys, or other special featur es, consult customer service center . all models with all options when ordered with ?ontact material. 90o position 1 positions 1 & 2 on off pm0613 pm061u sp indexing lock configura tion key pull positions switch function pos. 1 pos. 2 model no. no. poles part number shown: pm0613ebm05kq22 sp pos. 1 pos. 2 pos. 1 pos. 2 key part number: 334c1004102
lC3 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock wc wire lead pm series 5 tumbler miniature snap-in switchlocks lock finish terminations lock style cont act ma terial available hardware p anel mounting pan el thickness: .050 -.080 (1,27-2,03) m plastic lock with ma tte finish 05 quick connect k cone shaped facing ul style 1015. black wir e standard, other colors and lengths available, consult customer service center . key code: 041 part no. (one key) 334c1004102 black material: brass finish: nickel plate6/6 nylon insert molded head 1 contacts & terminals: copper, with gold plate over nickel plate. 2 contacts & terminals: copper, silver plated (standard with all termination options). * note: see technical data section of this catalog for rohs compliant and compatible definitions and specifications. all models with all options when ordered with ?ontact material. co n t ac t an d option co d e te rmin al mater ial ra ti n g q 4 a m ps @ 1 25 v a c o r 28 v d c ; 2 a m ps @ 2 50 v a c (ul/csa ). low leve l/ d ry cir cu it b si l ver 2 po wer 0.4 va m ax . @ 2 0 v a c o r d c m a x. rohs co m pl ian t* rohs co m patib l e* ye s ye s ye s ye s g old 1 4 a m ps @ 1 25 v a c; o r 2 amps @ 2 50 v a c; t6 5 ( vd e) .
|
