bi technologies corporation 4200 bonita place, fullerton, ca 92835 usa phone: 714 447 2345 website: www.bitechnologies.com may 7, 2007 page 1 of 3 bi technologies model 22 model 22 model 22 model 22 3 mm single turn sealed surface mount cermet trimming potentiometer models available models available models available models available j hook 22a side mount 22s electrical electrical electrical electrical 1 1 1 1 resistance range 10 ohm to 2 megohms standard resistance tolerance 20% input voltage, maximum 200 vdc or rms, not to exceed power rating power rating, watts 0.125 @ 70 c, derating to 0 @ 125 c end resistance, maximum 1% or 3 ohms, whichever is greater actual electrical travel, nominal 220 dielectric strength 500 v rms insulation resistance, minimum 100 megohms resolution essentially infinite contact resistance variation, maximum 3% or 3 ohms, whichever is greater temperature coefficient of resistance 100 ppm/ c (less than 100 ohms: 150 ppm/ c) mechanical mechanical mechanical mechanical mechanical stop solid static stop strength 1.3 in. oz. torque, maximum 0.65 in. oz. weight, nominal 0.002 oz. wiper position approx. 50% 1 specifications subject to change without notice.
model 22 bi technologies corporation 4200 bonita place, fullerton, ca 92835 usa phone: 714 447 2345 website: www.bitechnologies.com may 7, 2007 page 2 of 3 bi technologies environmental environmental environmental environmental seal 85 c fluorinert? operating temperature range -55 c to +125 c thermal shock, 5 cycles, -55 c to +125 c 2% ? r, 1% ? v ratio max. moisture resistance, ten 24 hour cycles 3% ? r shock, 6 ms sawtooth 100g?s 1% ? r, 1% ? v ratio max. vibration, 20g?s to 2000 hz 1% ? r, 1% ? v ratio max. high temperature exposure, 250 hours @ 125 c 2% ? r, 2% ? v ratio max. rotational life, 100 cycles 3% ? r load life, 0.125w, 100 hours, 70 c 3% ? r, 2% ? v ratio max. resistance to solder heat 260 c for 5 sec. ordering information ordering information ordering information ordering information 2 2 2 2 packaging packaging packaging packaging ? ? ? ? tape & r tape & r tape & r tape & re e e eel el el el model 22a model 22s tape width 12 mm 16 mm sprocket pitch 4 mm 4 mm reel diameter 7 inches 7 inches quantity per reel 1000 units 200 units standard resistance standard resistance standard resistance standard resistance values, ohms values, ohms values, ohms values, ohms 10 100 1k 10k 100k 1 meg 20 200 2k 20k 200k 2 meg 50 500 5k 50k 500k 2 contact our customer service for custom designs and features. 22 a r10k lf t r 22 a r10k lf tr 22 a r10k lf t r 22 a r10k lf tr model series pin style packaging (tape & reel) - optional rohs compliant product code - optional resistance value
model 22 bi technologies corporation 4200 bonita place, fullerton, ca 92835 usa phone: 714 447 2345 website: www.bitechnologies.com may 7, 2007 page 3 of 3 bi technologies outline drawing outline drawing outline drawing outline drawing 3 3 3 3 model 22a model 22s circuit diagram circuit diagram circuit diagram circuit diagram 3 dimensions are inches (mm), tolerances are .01 inch (.025 mm) unless otherwise stated.
|
