mos field effect transistor np80n055che, np80n055dhe, NP80N055EHE switching n-channel power mos fet industrial use data sheet document no. d14096ej4v0ds00 (4th edition) date published march 2001 ns cp(k) printed in japan the mark shows major revised points. ? 1999 the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all devices/types available in every country. please check with local nec representative for availability and additional information. description these pr oducts are n-c hannel mos field effect tansistor designed for high current switching applications. features ? channel temperature 175 de gree rated ? super low on-state resistance r ds(on) = 11 m ? max. (v gs = 10 v, i d = 40 a) ? low c iss : c iss = 2400 pf typ. ? built-in gate protection diode absolute maximum ratings (t a = 25c) drain to source voltage v dss 55 v gate to source voltage v gss 20 v drain current (dc) note1 i d(dc) 80 a drain current (pulse) note2 i d(pulse) 200 a total power dissipation (t a = 25c) p t 1.8 w total power dissipation (t c = 25c) p t 120 w single avalanche current note3 i as 45 / 31 / 10 a single avalanche energy note3 e as 2.0 / 96 / 100 mj channel temperature t ch 175 c storage temperature t stg ?55 to +175 c notes 1. calculated constant current according to max. allowable channel temperature. 2. pw 10 s, duty cycle 1 % 3. starting t ch = 25c, r g = 25 ? , v gs = 20 v 0 v (see figure 4.) thermal resistance channel to case r th(ch-c) 1.25 c/w channel to ambient r th(ch-a) 83.3 c/w ordering information part number package np80n055che to-220ab np80n055dhe to-262 NP80N055EHE to-263 (to-220ab) (to-262) (to-263)
data sheet d14096ej4v0ds 2 np80n055che, np80n055dhe, NP80N055EHE electrical characteristics (t a = 25c) characteristics symbol test conditions min. typ. max. unit drain to source on-state resistance r ds(on) v gs = 10 v, i d = 40 a 8.2 11 m ? gate to source threshold voltage v gs(th) v ds = v gs , i d = 250 a 2.0 3.0 4.0 v forward transfer admittance | y fs |v ds = 10 v, i d = 40 a 15 30 s drain leakage current i dss v ds = 55 v, v gs = 0 v 10 a gate to source leakage current i gss v gs = 20 v, v ds = 0 v 10 a input capacitance c iss v ds = 25 v, v gs = 0 v, f = 1 mhz 2400 3600 pf output capacitance c oss 380 570 pf reverse transfer capacitance c rss 180 330 pf turn-on delay time t d(on) i d = 40 a, v gs(on) = 10 v, v dd = 28 v, 25 55 ns rise time t r r g = 1 ? 13 32 ns turn-off delay time t d(off) 45 91 ns fall time t f 13 33 ns total gate charge q g i d = 80 a, v dd = 44 v, v gs = 10 v 40 60 nc gate to source charge q gs 12 nc gate to drain charge q gd 16 nc body diode forward voltage v f(s-d) i f = 80 a, v gs = 0 v 1.0 v reverse recovery time t rr i f = 80 a, v gs = 0 v, di/dt = 100 a/ s49ns reverse recovery charge q rr 90 nc test circuit 3 gate charge v gs = 20 0 v pg. r g = 25 ? 50 ? d.u.t. l v dd test circuit 1 avalanche capability pg. d.u.t. r l v dd test circuit 2 switching time r g pg. i g = 2 ma 50 ? d.u.t. r l v dd i d v dd i as v ds bv dss starting t ch v gs 0 = 1 s duty cycle 1 % v gs wave form v ds wave form v gs v ds 10 % 0 0 90 % 90 % 90 % v gs(on) v ds t on t off t d(on) t r t d(off) t f 10 %10 %
data sheet d14096ej4v0ds 3 np80n055che, np80n055dhe, NP80N055EHE typical characteristics (t a = 25 c ) figure2. total power dissipation vs. case temperature t c - case temperature - ?c p t - total power dissipation - w 0 0 25 50 75 100 125 150 175 200 140 120 100 80 60 40 20 figure1. derating factor of forward bias safe operating area dt - percentage of rated power - % 0 0 25 50 75 100 125 150 175 200 20 40 60 80 100 figure4. single avalanche energy derating factor starting t ch - starting channel temperature - ?c single pulse avalanche energy - mj 0 25 40 60 80 100 120 50 75 100 125 150 175 20 t c - case temperature - ?c 100 mj 96 mj 2 mj 31 a 45 a i as = 10 a figure5. transient thermal resistance vs. pulse width pw - pulse width - s r th(t) - transient thermal resistance - ?c /w 10 0.01 0.1 1 100 1000 1 m 10 m 100 m 1 10 100 1000 single pulse r th(ch-a) = 83.3 ?c /w 10 100 r th(ch-c) = 1.25 ?c /w 0.1 0.1 1 10 100 1000 1 10 100 figure3. forward bias safe operating area v ds - drain to source voltage - v i d - drain current - a i d(pulse) i d(dc) pw = 10 s dc 100 s 1 ms r ds(on) limited (at v gs = 10 v) power dissipation limited t c = 25 ?c single pulse
data sheet d14096ej4v0ds 4 np80n055che, np80n055dhe, NP80N055EHE figure8. forward transfer admittance vs. drain current figure9. drain to source on-state resistance vs. gate to source voltage figure10. drain to source on-state resistance vs. drain current figure11. gate to source cut-off voltage vs. channel temperature t ch - channel temperature - ?c v gs(off) - gate to source cut-off voltage - v i d - drain current - a | y fs | - forward transfer admittance - s v gs - gate to source voltage - v r ds(on) - drain to source on-state resistance - m ? 0 0 6 24 81012141618 pulsed 10 20 30 40 50 i d = 40 a i d - drain current - a r ds(on) - drain to source on-state resistance - m ? 10 10 1 20 30 100 1000 pulsed 0 v gs = 10 v v ds =10v pulsed 0.01 0.1 1 10 100 10 100 0.01 0.1 1 t a = 175 ?c 75 ?c 25 ?c ? 25 ?c v ds = v gs i d = 250 a 2.0 3.0 4.0 ? 50 0 50 100 150 1.0 0 figure7. drain current vs. drain to source voltage figure6. forward transfer characteristics v ds - drain to source voltage - v i d - drain current - a v gs - gate to source voltage - v i d - drain current - a 0 0 2 3 4 80 200 160 120 1 pulsed v gs =10 v 40 1 0.1 10 100 1000 pulsed 2 34 6 5 1 v ds = 10 v t a = ? 40 ?c 25 ?c 75 ?c 150 ?c 175?c
data sheet d14096ej4v0ds 5 np80n055che, np80n055dhe, NP80N055EHE figure12. drain to source on-state resistance vs. channel temperature t ch - channel temperature - ? c r ds(on) - drain to source on-state resistance - m ? figure14. capacitance vs. drain to source voltage figure15. switching characteristics 0 ? 50 4 8 12 0 50 100 150 i d = 40 a figure16. reverse recovery time vs. drain current 16 20 24 figure17. dynamic input/output characteristics v gs = 10 v v ds - drain to source voltage - v c iss , c oss , c rss - capacitance - pf i d - drain current - a t d(on) , t r , t d(off) , t f - switching time - ns 1 1 0.01 0.1 10 0.1 100 1000 10000 1 10 100 v gs = 0 v f = 1 mhz 10 100 1000 10 100 c oss c rss c iss v gs - gate to source voltage - v i f - drain current - a t rr - reverse recovery time - ns di/dt = 100 a/ s v gs = 0 v 1 0.1 10 1.0 10 100 q g - gate charge - nc v ds - drain to source voltage - v 0 0 40 20 10 30 20 40 60 80 2 4 v ds 1 000 100 6 10 12 14 16 8 v gs v dd = 44 v i d = 80 a 28 v 11 v pulsed t d(on) t d(off) t f t r figure13. source to drain diode forward voltage 1.0 i sd - diode forward current - a 0 1.5 v sd - source to drain voltage - v 0.5 pulsed 0.1 1 10 100 1000 v gs = 0 v v gs = 10 v
data sheet d14096ej4v0ds 6 np80n055che, np80n055dhe, NP80N055EHE package drawings (unit: mm) (10.0) 1.40.2 1.00.5 2.54 typ. 2.54 typ. 8.50.2 123 5.70.4 4 2.80.2 4.8 max. 1.30.2 0.50.2 (0.5r) (0.8r) 1.gate 2.drain 3.source 4.fin (drain) 0.70.2 4.8 max. 1.gate 2.drain 3.source 4.fin (drain) 1 2 3 10.6 max. 10.0 3.60.2 4 3.00.3 1.30.2 0.750.1 2.54 typ. 2.54 typ. 5.9 min. 6.0 max. 15.5 max. 12.7 min. 1.30.2 0.50.2 2.80.2 1) to-220ab (mp-25) 3) to-263 (mp-25zj) equivalent circuit 4.8 max. 1.gate 2.drain 3.source 4.fin (drain) 1 2 3 (10) 4 1.30.2 0.750.3 2.54 typ. 2.54 typ. 8.50.2 12.7 min. 1.30.2 0.50.2 2.80.2 1.00.5 2) to-262 (mp-25 fin cut) source body diode gate protection diode gate drain remark the diode connected between the gate and source of the transistor serves as a protector against esd. when this device actually used, an addit ional protection circ uit is externally required if a voltage exc eeding the rated voltage may be applied to this device.
data sheet d14096ej4v0ds 7 np80n055che, np80n055dhe, NP80N055EHE [memo]
np80n055che, np80n055dhe, NP80N055EHE m8e 00. 4 the information in this document is current as of march, 2001. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec's data sheets or data books, etc., for the most up-to-date specifications of nec semiconductor products. not all products and/or types are available in every country. please check with an nec sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without prior written consent of nec. nec assumes no responsibility for any errors that may appear in this document. nec does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec semiconductor products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. nec assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec endeavours to enhance the quality, reliability and safety of nec semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. nec semiconductor products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. the recommended applications of a semiconductor product depend on its quality grade, as indicated below. customers must check the quality grade of each semiconductor product before using it in a particular application. "standard": computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "special": transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "specific": aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. the quality grade of nec semiconductor products is "standard" unless otherwise expressly specified in nec's data sheets or data books, etc. if customers wish to use nec semiconductor products in applications not intended by nec, they must contact an nec sales representative in advance to determine nec's willingness to support a given application. (note) (1) "nec" as used in this statement means nec corporation and also includes its majority-owned subsidiaries. (2) "nec semiconductor products" means any semiconductor product developed or manufactured by or for nec (as defined above). ? ? ? ? ? ?
|
