single phase PSW1C70 i trms = 72 a ac controller modules v rrm = 600-1200 v preliminary data sheet features ? thyristor controller for ac (circuit w1c acc. to iec) for mains frequency ? ? isolation voltage 3000 v ? planar glass passivated chips ? low forward voltage drop ? leads suitable for pc board soldering ? ul registered, e 148688 applications ? switching and control of single and three phase ac circuits ? light and temperature control ? softstart ac motor controller ? solid state switches advantages ? easy to mount with two screws ? space and weight savings ? improved temperature and power cycling capability ? high power density ? small and light weight powersem gmbh, walpersdorfer str. 53 d - 91126 schwabach phone: 09122 - 9764 - 0 fax: 09122 - 9764 - 20 eco-pac tm 1 ? 2005 powersem reserves the right to change limits, test conditions and dimensions v rsm v rrm type v dsm v drm (v) (v) 700 600 psw1c 70/06 900 800 psw1c 70/08 1300 1200 psw1c 70/12 data according to iec 60747 refer to a single thyristor unless otherwise stated symbol test conditions maximum ratings i trms t vj = t vjm 72 a i tavm t c = 75 c; 180 sine 53 a i tavm t c = 85 c; 180 sine 45 a i tsm t vj = 45 c t = 10 ms (50 hz), sine 1100 a v r = 0 t = 8.3 ms (60 hz), sine 1200 a t vj = 125 c t = 10 ms (50 hz), sine 990 a v r = 0 t = 8.3 ms (60 hz), sine 1090 a i 2 dt t vj = 45 c t = 10 ms (50 hz), sine 6050 a2s v r = 0 t = 8.3 ms (60 hz), sine 5970 a2s t vj = 125 c t = 10 ms (50 hz), sine 4900 a2s v r = 0 t = 8.3 ms (60 hz), sine 4930 a2s (di/dt) cr t vj = 125 c repetitive, i t = 150 a 150 a/s f=50hz, t p =200s v d =2/3v drm i g =0.5 a non repetitive,i t = i tavm 500 a/s di g /dt=0.5a/s (dv/dt) cr t vj = 125 c v d =2/3v drm 1000 v/s r gk = , method 1 (linear voltage rise) p gm t vj = 125 c t p =30s 10 w i t =i tavm t p =300s 5w p gavm 0.5 w v rgm 10 v t vj -40... + 125 c t vjm 125 c t stg -40... + 125 c v isol 50/60 hz, rms t = 1 min 2500 v i isol 1 ma t = 1 s 3000 v m d mounting torque (m4) 1.5 - 1.8 n m 14 - 16 lb.in. weight typ. 18 g ef mn ij g h ab
eco-pac tm 1 powersem gmbh, walpersdorfer str. 53 d - 91126 schwabach phone: 09122 - 9764 - 0 fax: 09122 - 9764 - 20 ? 2005 powersem reserves the right to change limits, test conditions and dimensions package style and outline dimensions in mm (1mm = 0.0394?) symbol test conditions characteristic value i d, i r t vj = 125c, v r = v rrm , v d =v drm 10 ma v t i t = 150 a, t vj = 25 c 1.48 v v to for power-loss calculations only 0.85 v r t 4.6 m ? v gt v d =6v t vj = 25c 1.5 v t vj =-40c 1.9 v i gt v d =6v t vj = 25c 100 ma t vj =-40c 200 ma v gd t vj = 125c v d =2/3v drm 0.2 v i gd t vj = 125c v d =2/3v drm 10 ma i l t vj = 25c, t p =30s, v d =6v 100 ma i g =0.1a, di g /dt=0.1a/s i h t vj = 25c, v d =6v, r gk = ? 80 ma t gd t vj = 25c, v d =1/2v drm 2s i g =0.1a, di g /dt=0.1a/s t q t vj = t vjm ; i t =50a; t p =200s;-di/dt=10a/s typ. 100 s v r =100v; dv/dt=10v/s; v d =2/3v drm r thjc per thyristor; dc 0.62 k/w per module 0.31 k/w r thjk per thyristor; sine 180 el typ. 0.78 k/w per module typ. 0.39 k/w d s creeping distance on surface 6.6 m m d a creeping distance in air 9.7 m m a max. allowable acceleration 50 m/s2
|
