customer's name specification no. ref.ce-p678 03/10 specifications sheet for approval p r o d u c t n a m e l250-lens15 p a r t s n o . 516-A00070 page no. page item drawing no. 1 drawing al2-033-03 2 packing specification 3 physical properties approval signature citizen electronics co.,ltd 1-23-1,kami-kurechi,fujiyoshida-shi, yamanashi-ken 403-0001,japan tel (0555)23-4121 fax (0555)24-2426 sales department approved checked drawn gqp-0013-f03-3 (sgp-0013-f05-0)
symbol name drawin no. date part no. citizen electronics co.,ltd general tolerances dimensions angles drawn checked / scale unit mm mark date description appro. 1 6 2 3 5 4 (rqp-0302-f10-0,uqp-u302-f04-0) this drawing is the property of citizen electronics co.,ltd. and should not be disclosed to any third party without prior permission of citizen electroni cs co.,ltd. ? no.gqp-0302-f04-1 alternation approved 26.58 11.4 2.3 1 13.8 refer leftward table 2 1 lens 4 3 . 7 8 5 . 1 5 lQ6 0.05 0.1 0.2 0.3 6lQ18 0.08 0.2 0.3 0.5 18lQ50 0.1 0.3 0.5 1.0 50lQ120 0.18 0.45 0.8 1.5 120lQ400 0.28 0.7 1.2 2.0 angle limits unless otherwise note 1 2009.07.14 refer leftward table k.matsuyama l250-lens15 1 this drawing for citizen electronics co., ltd. : cl-l250 series only 2 material: pc 3 the angle r without directions is set to 0.2. 4 no scratches, stain, etc allowes. 6 dimension is based on as follows. remarks 516-A00070 al2-033-03 29 0.5 3 . 2 0 . 8 2.5 max (gate) 6 0 3 0 . 2 m a x gate k.sasuga k.funakubo 09.12.03 full-fledged revision 1 10.01.13 adjustment of fit 1 ref.ce-p678 03/10
symbol name drawin no. date part no. citizen electronics co.,ltd general tolerances dimensions angles drawn checked / scale unit mm mark date description appro. 1 2 7 3 4 6 5 (rqp-0302-f10-0,uqp-u302-f04-0) this drawing is the property of citizen electronics co.,ltd. and should not be disclosed to any third party without prior permission of citizen electroni cs co.,ltd. ? no.gqp-0302-f04-1 alternation approved 100pcs./tray lens tray bag cardboard max1000pcs./bag stack 10 tray (max) + empty tray as top cover arbitr ary size k.matsuyama k.sasuga k.funakubo free l250-lens15 packing specification 2010/01/13 cardboard label label part name part no. lot no. quantity date qc citizen electronics co., ltd. l250-lens15 516-A00070 ref.ce-p678 03/10
property property property property test method test method test method test method condition condition condition condition unit unit unit unit optical optical optical optical light transmission astm d 1003 3mm % 88 reflective index astm d 542 - - 1.585 mechanical mechanical mechanical mechanical tensile modulus 1mm/min mpa 2400 tensile strength at yield 50mm/min mpa 62 tensile strain at yield 50mm/min % 6 nominal tensile strain at break 50mm/min % >50 flexual modulus iso 178 2mm/min mpa 2400 flexual strength iso 178 2mm/min mpa 94 iso 179 unnoched kj/m 2 nb iso 179 noched kj/m 2 58 rockwell hardness iso 2039-2 m scale - 77 thermal thermal thermal thermal 1.8mpa 125 0.45mpa 138 vicat softening point iso 306 50/h 50n 142 melt volume flow rate iso 1133 300 load 1.2kg cm 3 /10min 24 parallel x10 -4 /k 0.7 vertical x10 -4 /k 0.7 electrical electrical electrical electrical surface resistivity iec 60093 - >10 15 volume resistivity iec 60093 - m >10 13 withstand voltage iec 60243-1 short time test mv/m 30 100hz - 3.1 1mhz - 3 100hz x10 -4 10 1mhz x10 -4 90 tracking resistance iec 60112 - - 225 other other other other density iso 1183 - kg/m 3 1200 water absorption at 23 iso 62 in water 24h % 0.2 flammability ul94 - class hb physical properties physical properties physical properties physical properties iso 527-1 and iso 527-2 charpy impact strengthheat deflection temperature iso 75-1 and iso 75-2 dielectric loss tangent iec 60250 *values reported are typical and should not be used for specification purpose. coefficient of linear expansion iso 11359-2 specific inductive capacity iec 60250 ref.ce-p678 03/10
|