1/9 march 2002 . stb60ne06-16 n-channel 60v - 0.013 w - 60a d 2 pak stripfet ? ii power mosfet n typical r ds (on) = 0.013 w n exceptional dv/dt capability n 100% avalanche tested n low gate charge 100 o c n high dv/dt capability n application oriented characterization n for through-hole version contact sales office description this power mosfet is the latest development of stmicroelectronis unique osingle feature size ? o strip-based process. the resulting transistor shows extremely high packing density for low on- resistance, rugged avalanche characteristics and less critical alignment steps therefore a remark- able manufacturing reproducibility. applications n dc motor control n dc-dc & dc-ac converters n synchronous rectification type v dss r ds(on) i d stb60ne06-16 60 v <0.016 w 60 a 1 3 d 2 pak to-263 (suffix at4o) internal schematic diagram absolute maximum ratings ( ? ) pulse width limit ed by safe operating area. (1) i sd 60a, di/dt 200a/ m s, v dd v (br)dss ,t j t jmax (2) starting t j =25 o c, i d = 60a, v dd = 25v symbol parameter value unit v ds drain-source voltage (v gs =0) 60 v v dgr drain-gate voltage (r gs =20k w ) 60 v v gs gate- source voltage 20 v i d drain current (continuous) at t c =25 c 60 a i d drain current (continuous) at t c = 100 c 42 a i dm ( ? ) drain current (pulsed) 240 a p tot total dissipation at t c =25 c 150 w derating factor 1 w/ c dv/dt (1) peak diode recovery voltage slope 11 v/ns e as (2) single pulse avalanche energy 400 mj t stg storage temperature -55 to 175 c t j operating junction temperature
stb60ne06-16 2/9 thermal data electrical characteristics (t case =25 c unless otherwise specified) off on (* ) dynamic rthj-case rthj-amb t l thermal resistance junction-case thermal resistance junction-ambient maximum lead temperature for soldering purpose max max 1 62.5 300 c/w c/w c symbol parameter test conditions min. typ. max. unit v (br)dss drain-source breakdown voltage i d = 250 m a, v gs =0 60 v i dss zero gate voltage drain current (v gs =0) v ds = max rating v ds = max rating t c = 125 c 1 10 m a m a i gss gate-body leakage current (v ds =0) v gs = 20 v 100 na symbol parameter test conditions min. typ. max. unit v gs(th) gate threshold voltage v ds =v gs i d = 250 m a 234v r ds(on) static drain-source on resistance v gs =10v i d =30a 0.013 0.016 w symbol parameter test conditions min. typ. max. unit g fs (*) forward transconductance v ds >i d(on) xr ds(on)max i d =30 a 20 35 s c iss c oss c rss input capacitance output capacitance reverse transfer capacitance v ds = 25v f = 1 mhz v gs =0 4600 580 140 pf pf pf
3/9 stb60ne06-16 switching on switching off source drain diode (*) pulsed: pulse duration = 300 m s, duty cycle 1.5 %. ( ? ) pulse width limited by safe operating area. symbol parameter test conditions min. typ. max. unit t d(on) t r turn-on time rise time v dd =30v i d =30a r g = 4.7 w v gs =10v (resistive load, figure 3) 40 125 ns ns q g q gs q gd total gate charge gate-source charge gate-drain charge v dd = 48v i d =60av gs = 10v 115 25 40 160 nc nc nc symbol parameter test conditions min. typ. max. unit t r(voff) t f t c off-voltage rise time fall time cross-over time v clamp =48v i d =60a r g = 4.7 w v gs =10v (inductive load, figure 5) 15 150 180 ns ns ns symbol parameter test conditions min. typ. max. unit i sd i sdm ( ? ) source-drain current source-drain current (pulsed) 60 240 a a v sd (*) forward on voltage i sd =60a v gs =0 1.5 v t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i sd = 60 a di/dt = 100a/ m s v dd =30v t j = 150 c (see test circuit, figure 5) 100 0.4 8 ns m c a thermal impedance electrical characteristics (continued) safe operating area
stb60ne06-16 4/9 output characteristics transfer characteristics transconductance static drain-source on resistance gate charge vs gate-source voltage capacitance variations
5/9 stb60ne06-16 normalized gate threshold voltage vs temperature normalized on resistance vs temperature source-drain diode forward characteristics normalized breakdown voltage temperature ..
stb60ne06-16 6/9 fig. 1: unclamped inductive load test circuit fig. 1: unclamped inductive load test circuit fig. 2: unclamped inductive waveform fig. 3: switching times test circuits for resistive load fig. 4: gate charge test circuit fig. 5: test circuit for inductive load switching and diode recovery times
7/9 stb60ne06-16 dim. mm. inch. min. typ. max. min. typ. typ. a 4.4 4.6 0.173 0.181 a1 2.49 2.69 0.098 0.106 a2 0.03 0.23 0.001 0.009 b 0.7 0.93 0.028 0.037 b2 1.14 1.7 0.045 0.067 c 0.45 0.6 0.018 0.024 c2 1.21 1.36 0.048 0.054 d 8.95 9.35 0.352 0.368 d1 8 0.315 e 10 10.4 0.394 0.409 e1 8.5 0.334 g 4.88 5.28 0.192 0.208 l 15 15.85 0.591 0.624 l2 1.27 1.4 0.050 0.055 l3 1.4 1.75 0.055 0.069 m 2.4 3.2 0.094 0.126 r 0.4 0.016 v2 0 8 0 8 d 2 pak mechanical data
stb60ne06-16 8/9 dim. mm inch min. max. min. max. a0 10.5 10.7 0.413 0.421 b0 15.7 15.9 0.618 0.626 d 1.5 1.6 0.059 0.063 d1 1.59 1.61 0.062 0.063 e 1.65 1.85 0.065 0.073 f 11.4 11.6 0.449 0.456 k0 4.8 5.0 0.189 0.197 p0 3.9 4.1 0.153 0.161 p1 11.9 12.1 0.468 0.476 p2 1.9 2.1 0075 0.082 r 50 1.574 t 0.25 0.35 .0.0098 0.0137 w 23.7 24.3 0.933 0.956 dim. mm inch min. max. min. max. a 330 12.992 b 1.5 0.059 c 12.8 13.2 0.504 0.520 d 20.2 0.795 g 24.4 26.4 0.960 1.039 n 100 3.937 t 30.4 1.197 base qty bulk qty 1000 1000 reel mechanical data * on sales type tube shipment (no suffix)* tape and reel shipment (suffix ot4o)* d 2 pak footprint tape mechanical data
9/9 stb60ne06-16 information furnished is believed to be accurate and reliable. however, stmicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specifications mentioned in this publication are subject to change without notice. this publication supersedes and replaces all information previously supplied. stmicroelectronics products are not authorized for use as critical components in lif e support devices or systems without express written approval of stmicroelectronics. the st logo is registered trademark of stmicroelectronics ? 2002 stmicroelectronics - all rights reserved all other names are the property of their respective owners. stmicroelectronics group of companies australia - brazil - canada - china - finland - france - germany - hong kong - india - israel - italy - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states. http://w ww.st.com
|
