View FX2M3-128S8-DSAL_2636463.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

a177 plug-in connectors for disk unit fx2m3 series features 1. plug-in connector equipped with power contact the total number of contacts contains 128 contacts, of which 120 contacts belong to the half pitch signal contacts, and the remained 8 contacts are used for the power contact. the power contact corresponds to the high current (7.5a). 2. three-stage sequential structure considering the plug and play, 3 stages sequential structure is employed. 3. flux tight the signal contact area of the straight through hole type has completely prevented flux swell due to solder dipping. 4. bus line connection the socket side connector allow to connect the bus line. 5. floating mechanism the socket type employs the floating ( = 1mm) mechanism for the panel installation. floating mechanism bus line connection (power supply side) bus line connection (for signal) since the signal contact can be engaged or disengaged, connection can be performed in combination with the cable type and the terminator as illustrated on the left. the power contact allows to connect the bus line. c 1 -------------- c 2 c 3 -------------- c 4 c 5 -------------- c 6 c 7 -------------- c 8 short inside the connector at every 2 contacts. fx2m3-128s8-rc use example
a178 insulator header pbt/polyamide black ul94v-0 termination connector pps light brown ul94v-0 header brass selective gold plated signal contact receptacle, phosphor bronze slective gold plated ________ termination connector cable connector beryllium copper selective gold plated header brass tin plated power contact receptacle phosphor bronze tin plated ________ socket copper alloy tin plated 1. insulation resistance signal contact 100m ohms min. 250v dc power contact 1000m ohms min. 2. withstanding voltage no flashover or insulation breakdown. signal contact 300v ac for 1 minute power contact 1000v ac for 1 minute 3. contact resistance signal contact 45m ohms max. 100ma power contact 30m ohms max. 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) signal contact resistance: 55m ohms max. insulation resistance: 100m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% contact contact resistance: 30m ohms max. insulation resistance: 1000m ohms min. 6. temperature cycle signal contact resistance: 55m ohms max. insulation resistance: 100m ohms min. (-55 ? : 30 minutes 15 to 35 ? : 2 to 3 minutes contact contact resistance: 30m ohms max. insulation resistance: 1000m ohms min. (- 85 ? : 30 minutes 15 to 35 ? : 2 to 3minutes) 5 cycles 7. durability signal contact contact resistance: 55m ohms max. 30 cycles (mating/un-mating) power contact contact resistance: 30m ohms max. 8. resistance to soldering heat no deformation of components affecting performance. reflow: at the recommended temperature profile manual soldering: 300? for 10 seconds applications office computers and other information processsing machines product specifications rating current rating signal contact: 0.5a voltage rating 125v ac operating temperature range: -55 ? to +85 ? note 1. storage temperature range: -10 ? to +60 ? note 2. power contact: 7.5a operating humidity range : 40% to 80% storage humidity range: 40% to 70% note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. item specifications condition material parts material finish remarks
a179 fx2m3-128s8-rc 572-1007-0 ___ (note1) 8 socket side fx2m3-128p8-dsl 572-1008-2 60 2 8 header side, right angle through hole FX2M3-128S8-DSAL 572-1009-5 60 2 8 receptacle side, straight through hole fx2m3-128p8-dsal 572-1010-4 60 2 8 header side, straight through hole fx2ba-60s-1.27r/l 572-1026-4 60 (note2) ______ cable connector fx2m3-60s-1.27sh 572-1020-8 60 (note2) ______ termination connector fx 2m3 - 128 s 8 - dsa l qwerty qw er t y fx 2ba - 60 s - 1.27 r/l ordering information t contact type dsa : straight through hole ds : right angle through hole rc : socket (note 1) y l: board prefixed pin attached q series name : fx2m3 w 128 : (total contact number) e connector types : s : receptacle or socket p : header r 8: power contact number r connector type : s. socket (cable connector) receptacle (termination connector) t contact pitch..1.27mm y r/l : id connection type sh : pinching smt type q series name : fx w series no. : 2ba..cable connector 2m3..termination connector e number of contacts : 60 60 contacts engage/disengage connector part number cl no. number of contacts remarks signal power note 1 : the signal connector is uninstalled. (use fx2ba-60s-1.27r/l or fx2m3-60s-1.27sh.) note 2 : installation to fx2m3-128s8-rc possible.
a180 b power contact detailed view fx2m3-128s8-rc cl572-1007-0 please use the marketed tub contact (product compliant to jis standard: jis2809) to connect the cable in the power contact area. (however, use phosphor bronze as material.) socket note: the signal connector is uninstalled in this product. use fx2ba-60s-1.27r/l or fx2m3-60s-1.27sh. b combination view (fx2ba-60s-1.27r/l or fx2m3-60s-1.27sh is installed in this product.)
a181 fx2m3-60s-1.27sh cl572-1020-8 note: the locking type is prepared for the termination connector. contact the hrs pcc technical department for details. b cable assembly view fx2ba-60s-1.27r/l cl572-1026-4 cable connector note: this product can be installed in fx2m3-128s8-rc. applicable cable: 1.27 pitch flat cable awg28 (7/0.127) insulation covering diameter 0.9mm < ul2651 > termination connector
a182 header fx2m3-128p8-dsl cl572-1008-2 right angle type straight type fx2m3-128p8-dsal cl572-1010-4
a183 receptacle FX2M3-128S8-DSAL cl572-1009-5 straight type
a184 b pcb mounting pattern fx2m3-128p8-dsl fx2m3-128p8-dsal FX2M3-128S8-DSAL
a185 b panel cutouts (mounted on rear side) fx2m3-128s8-rc fx2m3-128p8-dsl b fx2m3-60s-1.27sh pcb mounting pattern
a186 b application pattern floating range 1.0mm floating range 1.0mm
a187 b fx2m3-128s8-rc operating instructions
a188 since the signal contact can be engaged or disengaged, the contact can be used in combination with the cable type and the terminator as illustrated on the left. power side signal side the power contact allows to connect the bus line. c 1 -------------- c 2 c 3 -------------- c 4 c 5 -------------- c 6 c 7 -------------- c 8 short inside the connector at every 2 contacts. fx2m3-128s8-rc use example

▲Up To Search▲

Price & Availability of FX2M3-128S8-DSAL

	To Download FX2M3-128S8-DSAL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .