View S7805PIC06_2911076.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ksd-i0t002-000 1 s78xxpic fixed voltage regulator descriptions the s78xx series are three-terminal positive regulators providing ov er 1a output current with internal current limiting, thermal shutdown and safe area protection. these regulators are useful in a wide range of applications. although they are just fixed voltage regulators, the s78xx series can be used with external components to obtain adjustable voltages and currents. features ? output current of 1a ? short circuit current limit protection ? thermal shutdown protection ? output transistor safe area protection ordering information type no. marking package code s78xxpic s78 pi to-220f-3sl :voltage code (05:5v, 06:6v, 08:8v, 09:9v, 10:10v,12:12v,15:15v,24:24v) s s e e m m i i c c o o n n d d u u c c t t o o r r pin connections 1. input 2. gnd 3. output outline dimensions (unit : mm ) block diagram 3.05~3.35 15.40~15.80 9.80~10.20 6.37~6.97 12.20~12.60 9.10~9.30 2.00 typ. 1.07 min. 0.90 max. 2.54 typ. 2.54 typ. 4.70 max. 2.70 max. 0.60 max. i r2 startup circuit gnd + - r1 o current source reference voltage error amp soa protection circuit thermal protection v v
ksd-i0t002-000 2 s78xxpic absolute maximum ratings ta=25 characteristic symbol rating unit 40 (s7824pic) v input voltage v i 35 (all others) v p d 1 2.0 power dissipation p d 2 [t c =25 c] 20 w operating temperature range t opr -40 ~ +85 c junction temperature t j 150 c storage temperature range t stg -55 ~ +150 c device selection guide device output voltage s7805pic 5v s7806pic 6v s7808pic 8v s7809pic 9v s7810pic 10v s7812pic 12v s7815pic 15v s7824pic 24v
ksd-i0t002-000 3 s78xxpic electrical characteristics (electrical characteristics at 0 t j 125 and v i =10v, i o =500 ? , unless otherwise specified) s7805pic characteristic symbol test condition* min. typ. max. unit t j =25 4.80 5.0 5.20 output voltage** v o i o =5 ? ~ 1000 ? v i =7.0v ~ 20v 0 t j 125 4.75 5.0 5.25 v v i =7.0v ~ 25v - 3 100 line regulation v o( vi) v i =8.0v ~ 12v t j =25 - 1 50 ? i o =5 ? ~ 1000 ? - 15 100 load regulation v o( il) i o =250 ? ~ 750 ? t j =25 - 5 50 ? quiescent current i qc t j =25 - 4.2 8.0 ? temperature coefficient of output voltage v o / te m p i o =5 ? 0 t j 125 - -1.1 - ? / v i = 7.0v ~ 25v - - 1.3 quiescent current change i qc i o = 5 ? ~ 1000 ? 0 t j 125 - - 0.5 ? dropout voltage v drop i o =1000 ? t j =25 - 2.0 - v ripple rejection rr f=120 ? v i =8.0v ~ 18v 0 t j 125 62 78 - ? short-circuit current limit i so t j =25 - 0.75 - a pulse testing techniques are used to maintain th e junction temperature as close to the ambient temperature as possible. thermal effe cts must be taken into separately. ** this specification applies only for dc power di ssipation permitted by absolute maximum ratings.
ksd-i0t002-000 4 s78xxpic electrical characteristics (electrical characteristics at 0 t j 125 and v i =11v, i o =500 ? , unless otherwise specified) s7806pic characteristic symbol test condition* min. typ. max. unit t j =25 5.75 6 6.25 output voltage** v o i o =5 ? ~ 1000 ? v i =8.0v ~ 21v 0 t j 125 5.70 6 6.30 v v i =8.0v ~ 25v - 5 120 line regulation v o( vi) v i =9.0v ~ 13v t j =25 - 1.5 60 ? i o =5 ? ~ 1000 ? - 14 120 load regulation v o( il) i o =250 ? ~ 750 ? t j =25 - 4 60 ? quiescent current i qc t j =25 - 4.3 8 ? temperature coefficient of output voltage v o / te m p i o =5 ? 0 t j 125 - -0.8 - ? / v i = 8.0v ~ 25v - - 1.3 quiescent current change i qc i o = 5 ? ~ 1000 ? 0 t j 125 - - 0.5 ? dropout voltage v drop i o =1000 ? t j =25 - 2.0 - v ripple rejection rr f=120 ? v i =9.0v ~ 19v 0 t j 125 59 75 - ? short-circuit current limit i so t j =25 - 0.55 - a pulse testing techniques are used to maintain th e junction temperature as close to the ambient temperature as possible. thermal effe cts must be taken into separately. ** this specification applies only for dc power di ssipation permitted by absolute maximum ratings.
ksd-i0t002-000 5 s78xxpic electrical characteristics (electrical characteristics at 0 t j 125 and v i =14v, i o =500 ? , unless otherwise specified) s7808pic characteristic symbol test condition* min. typ. max. unit t j =25 7.70 8 8.30 output voltage** v o i o =5 ? ~ 1000 ? v i =10.5v ~ 23v 0 t j 125 7.60 8 8.40 v v i =10.5v ~ 25v - 6 160 line regulation v o( vi) v i =11v ~ 17v t j =25 - 2 80 ? i o =5 ? ~ 1000 ? - 12 160 load regulation v o( il) i o =250 ? ~ 750 ? t j =25 - 4 80 ? quiescent current i qc t j =25 - 4.3 8 ? temperature coefficient of output voltage v o / te m p i o =5 ? 0 t j 125 - -0.8 - ? / v i = 10.5v ~ 25v - - 1 quiescent current change i qc i o = 5 ? ~ 1000 ? 0 t j 125 - - 0.5 ? dropout voltage v drop i o =1000 ? t j =25 - 2.0 - v ripple rejection rr f=120 ? v i =11.5v ~ 21.5v 0 t j 125 55 72 - ? short-circuit current limit i so t j =25 - 0.45 - a pulse testing techniques are used to maintain th e junction temperature as close to the ambient temperature as possible. thermal effe cts must be taken into separately. ** this specification applies only for dc power di ssipation permitted by absolute maximum ratings.
ksd-i0t002-000 6 s78xxpic electrical characteristics (electrical characteristics at 0 t j 125 and v i =16v, i o =500 ? , unless otherwise specified) s7809pic characteristic symbol test condition* min. typ. max. unit t j =25 8.65 9 9.35 output voltage** v o i o =5 ? ~ 1000 ? v i =11.5v ~ 24v 0 t j 125 8.55 9 9.45 v v i =11.5v ~ 27v - 7 180 line regulation v o( vi) v i =13v ~ 19v t j =25 - 2 90 ? i o =5 ? ~ 1000 ? - 12 180 load regulation v o( il) i o =250 ? ~ 750 ? t j =25 - 4 90 ? quiescent current i qc t j =25 - 4.3 8 ? temperature coefficient of output voltage v o / te m p i o =5 ? 0 t j 125 - -1.0 - ? / v i = 11.5v ~ 27v - - 1 quiescent current change i qc i o = 5 ? ~ 1000 ? 0 t j 125 - - 0.5 ? dropout voltage v drop i o =1000 ? t j =25 - 2.0 - v ripple rejection rr f=120 ? v i =12v ~ 22v 0 t j 125 55 70 - ? short-circuit current limit i so t j =25 - 0.4 - a pulse testing techniques are used to maintain th e junction temperature as close to the ambient temperature as possible. thermal effe cts must be taken into separately. ** this specification applies only for dc power di ssipation permitted by absolute maximum ratings.
ksd-i0t002-000 7 s78xxpic electrical characteristics (electrical characteristics at 0 t j 125 and v i =17v, i o =500 ? , unless otherwise specified) s7810pic characteristic symbol test condition* min. typ. max. unit t j =25 9.60 10 10.4 output voltage** v o i o =5 ? ~ 1000 ? v i =12.5v ~ 25v 0 t j 125 9.50 10 10.5 v v i =12.5v ~ 28v - 7 200 line regulation v o( vi) v i =14v ~ 20v t j =25 - 2 100 ? i o =5 ? ~ 1000 ? - 12 200 load regulation v o( il) i o =250 ? ~ 750 ? t j =25 - 4 100 ? quiescent current i qc t j =25 - 4.3 8 ? temperature coefficient of output voltage v o / te m p i o =5 ? 0 t j 125 - -1.0 - ? / v i = 12.5v ~ 28v - - 1 quiescent current change i qc i o = 5 ? ~ 1000 ? 0 t j 125 - - 0.5 ? dropout voltage v drop i o =1000 ? t j =25 - 2.0 - v ripple rejection rr f=120 ? v i =13v ~ 23v 0 t j 125 55 71 - ? short-circuit current limit i so t j =25 - 0.4 - a pulse testing techniques are used to maintain th e junction temperature as close to the ambient temperature as possible. thermal effe cts must be taken into separately. ** this specification applies only for dc power di ssipation permitted by absolute maximum ratings.
ksd-i0t002-000 8 s78xxpic electrical characteristics (electrical characteristics at 0 t j 125 and v i =19v, i o =500 ? , unless otherwise specified) s7812pic characteristic symbol test condition* min. typ. max. unit t j =25 11.5 12 12.5 output voltage** v o i o =5 ? ~ 1000 ? v i =14.5v ~ 27v 0 t j 125 11.4 12 12.6 v v i =14.5v ~ 30v - 10 240 line regulation v o( vi) v i =16v ~ 22v t j =25 - 3 120 ? i o =5 ? ~ 1000 ? - 12 240 load regulation v o( il) i o =250 ? ~ 750 ? t j =25 - 4 120 ? quiescent current i qc t j =25 - 4.3 8 ? temperature coefficient of output voltage v o / te m p i o =5 ? 0 t j 125 - -1.0 - ? / v i = 14.5v ~ 30v - - 1 quiescent current change i qc i o = 5 ? ~ 1000 ? 0 t j 125 - - 0.5 ? dropout voltage v drop i o =1000 ? t j =25 - 2.0 - v ripple rejection rr f=120 ? v i =15v ~ 25v 0 t j 125 55 71 - ? short-circuit current limit i so t j =25 - 0.35 - a pulse testing techniques are used to maintain th e junction temperature as close to the ambient temperature as possible. thermal effe cts must be taken into separately. ** this specification applies only for dc power di ssipation permitted by absolute maximum ratings.
ksd-i0t002-000 9 s78xxpic electrical characteristics (electrical characteristics at 0 t j 125 and v i =23v, i o =500 ? , unless otherwise specified) s7815pic characteristic symbol test condition* min. typ. max. unit t j =25 14.40 15 15.60 output voltage** v o i o =5 ? ~ 1000 ? v i =17.5v ~ 30v 0 t j 125 14.25 15 15.75 v v i =17.5v ~ 30v - 12 300 line regulation v o( vi) v i =20v ~ 26v t j =25 - 3 150 ? i o =5 ? ~ 1000 ? - 12 300 load regulation v o( il) i o =250 ? ~ 750 ? t j =25 - 4 150 ? quiescent current i qc t j =25 - 4.3 8 ? temperature coefficient of output voltage v o / te m p i o =5 ? 0 t j 125 - -1.0 - ? / v i = 17.5v ~ 30 v - - 1 quiescent current change i qc i o = 5 ? ~ 1000 ? 0 t j 125 - - 0.5 ? dropout voltage v drop i o =1000 ? t j =25 - 2.0 - v ripple rejection ratio rr f=120 ? v i =18.5v ~ 28.5 v 0 t j 125 54 70 ? short-circuit current limit i so t j =25 - 0.23 - a pulse testing techniques are used to maintain th e junction temperature as close to the ambient temperature as possible. thermal effe cts must be taken into separately. ** this specification applies only for dc power di ssipation permitted by absolute maximum ratings.
ksd-i0t002-000 10 s78xxpic electrical characteristics (electrical characteristics at 0 t j 125 and v i =33v, i o =500 ? , unless otherwise specified) s7824pic characteristic symbol test condition* min. typ. max. unit t j =25 23.0 24 25.0 output voltage** v o i o =5 ? ~ 1000 ? v i =27v ~ 38v 0 t j 125 22.8 24 25.2 v v i =27v ~ 38v - 18 480 line regulation v o( vi) v i =30v ~ 36v t j =25 - 6 240 ? i o =5 ? ~ 1000 ? - 12 480 load regulation v o( il) i o =250 ? ~ 750 ? t j =25 - 4 240 ? quiescent current i qc t j =25 - 4.6 8 ? temperature coefficient of output voltage v o / te m p i o =5 ? 0 t j 125 - -1.5 - ? / v i = 27v ~ 38 v - - 1 quiescent current change i qc i o = 5 ? ~ 1000 ? 0 t j 125 - - 0.5 ? dropout voltage v drop i o =1000 ? t j =25 - 2.0 - v ripple rejection ratio rr f=120 ? v i =28v ~ 38 v 0 t j 125 50 66 - ? short-circuit current limit i so t j =25 - 0.15 - a pulse testing techniques are used to maintain th e junction temperature as close to the ambient temperature as possible. thermal effe cts must be taken into separately. ** this specification applies only for dc power di ssipation permitted by absolute maximum ratings.
ksd-i0t002-000 11 s78xxpic the auk corp. products are intended for the use as components in general electronic equipment (office and co mmunication equipment, m easuring equipment, home appliance, etc.). please make sure that you consult with us before you use these auk corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to th e welfare of human life(atomi c energy control, airplane, spaceship, transportation, co mbustion control, all types of safety device, etc.). auk corp. cannot accept liability to any damage which may occur in case these auk corp. products were used in the mentioned equi pments without prior consultation with auk corp.. specifications mentioned in this publicati on are subject to change without notice.

▲Up To Search▲

Price & Availability of S7805PIC06

	To Download S7805PIC06 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .