16v, 180 a low power, low noise, single precision cmos rail-to-rail output operational amplifiers preliminary technical data ad8663 rev. pra information furnished by analog devices is believed to be accurate and reliable. however, no responsibility is assumed by analog devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. one technology way, p.o. box 9106, norwood, ma 02062-9106, u.s.a. tel: 781.329.4700 www.analog.com fax: 781.461.3113 ?2007 analog devices, inc. all rights reserved. features lower power at high voltage: 180 a typ low offset voltage: 100 v low input bias current: 300 fa max low voltage noise: 21nv/ hz @ 10khz 23nv/ hz @ 1khz single-supply operation: 5v to 16v dual-supply operation: 2.5v to 8v output drive 10ma unity gain stable applications medical equipment precision references buffer / level shifting portable operated systems sensors photodiode amplification adc drivers general description the ad8663 is single rail-to-rail output single/dual supply amplifiers that use analog devices patented digitrim ? trimming technique to achieve low offset voltage, 300 v over the common mode range. the ad8663 family features an extended operating range with supply voltage up to 16v for low power operation with i sy of < 325 a over the extended industrial temperature. these devices are designed for low noise at higher voltages, 21nv/ hz at 10khz and 23 nv/ hz at 1 khz. they also feature low input bias currents of 300fa and 10ma output drive. the combination of low supply currents, low offsets, very low input bias currents, and wide supply range make these amplifiers useful in a wide variety of low power applications. systems utilizing dc to low frequency measurements, or high impedance sensors, such as photo-diodes benefit from the combination of low input bias current, low noise, low offset and drive current. the wide operating voltage range matches todays high performance adcs and dacs. medical monitoring equipment can take advantage of the low voltage noise, high input impedance, low voltage and current noise. the ad8663 is specified over the extended industrial (-40 o c to +125 o c) temperature range. pin configurations figure 1. 8-lead lfcsp_vd (cp-16-4 suffix) figure 2. 8-lead soic_n (r-8 suffix)
ad8663 preliminary technical data rev. pra | page 2 of 5 table of contents features .............................................................................................. 1 applications....................................................................................... 1 general description ......................................................................... 1 pin configurations ........................................................................... 1 revision history ............................................................................... 2 specifications................................ error! bookmark not defined. specifications .....................................................................................3 absolute maximum ratings ............................................................5 thermal resistance .......................................................................5 esd caution...................................................................................5 ordering guide .............................................................................5 revision history 4/07revision 0: initial version
preliminary technical data ad8663 rev. pra | page 3 of 5
ad8663 preliminary technical data rev. pra | page 4 of 5
preliminary technical data ad8663 rev. pra | page 5 of 5 absolute maximum ratings table 1. parameter rating supply voltage 18v input voltage v s supply differential input voltage 18v output short-circuit duration to gnd indefinite storage temperature range ?65c to +150c operating temperature range ?40c to +125c junction temperature range ?65c to +150c lead temperature (soldering 60 sec) 300c stresses above those listed under absolute maximum ratings may cause permanent damage to the device. this is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. thermal resistance ja is specified for the worst-case conditions, that is, a device soldered in circuit board for surface-mount packages. table 2. package type ja jc unit 8-lead soic_n 121 43 c/w 8-lead lfcsp_vd 75 18 c/w esd caution esd (electrostatic discharge) sensitive device. electros tatic charges as high as 4000 v readily accumulate on the human body and test equipment and can discharge wi thout detection. although this product features proprietary esd protection circuitry, permanent dama ge may occur on devices subjected to high energy electrostatic discharges. therefore, proper esd precautions are recommended to avoid performance degradation or loss of functionality. ordering guide model temperature range package description package option AD8663ACPZ-R2 1 ?40c to +125c 8-lead lead frame chip scale package [lfcsp_vd] cp-8-2 ad8663acpz-r7 1 ?40c to +125c 8-lead lead frame chip scale package [lfcsp_vd] cp-8-2 ad8663acpz-rl 1 ?40c to +125c 8-lead lead frame chip scale package [lfcsp_vd] cp-8-2 ad8663arz 1 ?40c to +125c 8-lead standard small outline package [soic_n] r-8 ad8663arz-r7 1 ?40c to +125c 8-lead standard small outline package [soic_n] r-8 ad8663arz-rl 1 ?40c to +125c 8-lead standard small outline package [soic_n] r-8 1 z = pb-free part. ?2007 analog devices, inc. all rights reserved. trademarks and registered trademarks are the prop erty of their respective owners. pr06742-0-6/07(pra)
|
