1 of 1 062503 features low-cost fixtures that hold an ibutton ? for thumbpad applications or permanent attachment to an object. pre-punched hole mount for ibuttons: DS9093RA lock ring firmly fastens f5 package. ds9093rb flange enlargement provides additional flange surface area if needed. DS9093RA DS9093RA and ds9093rb application ds9093rb description the DS9093RA lock ring is a stainl ess-steel fastener that provides an inexpensive method for firmly attaching an ibutton to any item with a pre-punched hole. the i button is inserted through the hole and is restrained by the flange on the ibutton. the ds9093r a lock ring is crimped onto the portion of the ibutton that protrudes through the hole. the optional ds9093rb flange enlargement is a thin, stainless-steel washer that provides additional surface area to improve retention of the ibutton in ma terials that are very thin or flexible. the ds9093rb is formed with a slight dome to improve the gri pping force exerted onto the pre-punched material. the domed side of the washer should face the flange of the ibutton, the flat side should face the material. DS9093RA, ds9093rb ibutton plastic card mounts www.maxim-ic.com ibutton is a registered trademark of dallas semiconductor.
|
