View ITIPCI_3165740.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

db15-000206-00 ITIPCI 5000 series fast ethernet pci host adapters installation and user? guide october 2001 version 1.0 preliminary
ii copyright 2000?001 by lsi logic corporation. all rights reserved. electromagnetic compatibility notices this device complies with part 15 of the fcc rules. operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. these limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. however, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ? reorient or relocate the receiving antenna. ? increase the separation between the equipment and the receiver. ? connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ? consult the dealer or an experienced radio/tv technician for help. shielded cables for scsi connection external to the cabinet are used in the compliance testing of this product. lsi logic is not responsible for any radio or television interference caused by unauthorized modi?ation of this equipment or the substitution or attachment of connecting cables and equipment other than those speci?d by lsi logic. the correction of interferences caused by such unauthorized modi?ation, substitution, or attachment will be the responsibility of the user. the lsi logic ITIPCI tm 5132e-s, ITIPCI tm 5132e-sc, ITIPCI tm 5232e, ITIPCI tm 5464e-s, and ITIPCI tm 5464e-i are tested to comply with fcc standards for home or of?e use. this class b digital apparatus meets all requirements of the canadian interference-causing equipment regulations. cet appareil num?rique de la classe b respecte toutes les exigences du r?glement sur le mat?riel brouilleur du canada. this is a class b product based on the standard of the voluntary control council for interference from information technology equipment (vcci). if this is used near a radio or television receiver in a domestic environment, it may cause radio interference. install and use the equipment according to the instruction manual. lsi logic corporation north american headquarters milpitas, ca 408.433.8000
iii copyright 2000?001 by lsi logic corporation. all rights reserved. this document is preliminary. as such, it contains data derived from functional simulations and performance estimates. lsi logic has not veri?d either the functional descriptions, or the electrical and mechanical speci?ations using production parts. lsi logic products are not intended for use in life-support appliances, devices, or systems. use of any lsi logic product in such applications without written consent of the appropriate lsi logic of?er is prohibited. document db15-000206-00, first edition (october 2001) this document describes the lsi logic corporation ITIPCI 5000 series fast ethernet host adapters and will remain the of?ial reference source for all revisions/releases of this product until rescinded by an update. lsi logic corporation reserves the right to make changes to any products herein at any time without notice. lsi logic does not assume any responsibility or liability arising out of the application or use of any product described herein, except as expressly agreed to in writing by lsi logic; nor does the purchase or use of a product from lsi logic convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of lsi logic or third parties. copyright 2000?001 by lsi logic corporation. all rights reserved. trademark acknowledgment the lsi logic logo design and ITIPCI are trademarks or registered trademarks of lsi logic corporation. all other brand and product names may be trademarks of their respective companies. mh to receive product literature, visit us at http://www.lsilogic.com. for a current list of our distributors, sales of?es, and design resource centers, view our web page located at http://www.lsilogic.com/contacts/na_salesof?es.html
iv copyright 2000?001 by lsi logic corporation. all rights reserved.
ITIPCI 5000 series fast ethernet pci host adapters v copyright 2000?001 by lsi logic corporation. all rights reserved. preface this book is the installation and users guide for the ITIPCI 5000 series fast ethernet pci host adapters. this preliminary version contains information pertaining to the iti5232e and iti5464e four port ethernet host adapters. audience this document assumes that you have some familiarity with ethernet and fast ethernet pci host adapters and related support devices. the people who bene? from this book are: ? engineers and managers who are evaluating the host adapter for possible use in a system ? engineers who are designing or installing the host adapter into a system ? end-users organization this document has the following chapters and appendix: ? chapter 1, installing the fast ethernet host adapters describes the features of the iti5232e and iti5464e host adapters, and provides instructions for installing these boards. ? chapter 2, hardware speci?ations provides adapter speci?ations, connector information, and cabling requirements. ? chapter 3, network device driver installation provides instructions for installing your device driver onto various operating systems. ? appendix a, using digital srm console settings describes how the srm console is used in digital alpha platforms.
vi preface copyright 2000?001 by lsi logic corporation. all rights reserved.
ITIPCI 5000 series fast ethernet pci host adapters vii copyright 2000?001 by lsi logic corporation. all rights reserved. contents chapter 1 installing the fast ethernet host adapters 1.1 general description 1-1 1.1.1 features 1-1 1.2 quick host adapter installation 1-2 1.2.1 system requirements 1-2 1.2.2 installing the adapter 1-3 chapter 2 hardware speci?ations 2.1 fast ethernet host adapters 2-1 2.2 adapter speci?ations 2-2 2.3 connectors and indicator leds 2-3 2.4 connector pin assignments 2-5 2.5 cabling requirements 2-7 chapter 3 network device driver installation 3.1 windows device driver installation 3-1 3.1.1 for windows nt 3-2 3.1.2 for windows 2000 3-5 3.1.3 for windows 95 and windows 98 3-6 3.2 netware device driver installation 3-8 3.2.1 netware 3.1x system 3-8 3.2.2 netware 4.x and 4.11 systems 3-8 3.3 linux device driver installation 3-9 3.4 compaq tru64 unix device driver installation 3-9 3.5 digital openvms 3-10 3.6 troubleshooting 3-11 3.6.1 windows nt 3-11 3.6.2 windows nt error messages 3-12 3.6.3 driver initialization error messages 3-12
viii contents copyright 2000?001 by lsi logic corporation. all rights reserved. 3.6.4 driver run-time error messages 3-13 3.6.5 windows 95/windows 98 3-13 appendix a using digital srm console settings a.1 displaying and setting ethernet port characteristics a-1 customer feedback
ix copyright 2000?001 by lsi logic corporation. all rights reserved. figures 1.1 inserting the host adapter 1-4 2.1 connectors and indicator leds 2-4 2.2 8-pin rj-45 connector 2-5
x copyright 2000?001 by lsi logic corporation. all rights reserved.
xi copyright 2000?001 by lsi logic corporation. all rights reserved. tables 2.1 ITIPCI fast ethernet host adapters 2-1 2.2 iti5232e fast ethernet host adapter speci?ations 2-2 2.3 iti5464e fast ethernet host adapter speci?ations 2-3 2.4 connections and indicator leds for iti5232e and iti5464e 2-4 b.5 8-pin rj-45 connector pin assignments 2-5 b.6 adapter to network hub wiring 2-6 b.7 adapter to adapter (point-to-point) wiring 2-6 3.1 dc21x4 nt driver error codes 3-12 a.1 digital unix and open vms srm console media selection a-2
xii copyright 2000?001 by lsi logic corporation. all rights reserved.
ITIPCI 5000 series fast ethernet pci host adapters 1-1 copyright 2000?001 by lsi logic corporation. all rights reserved. chapter 1 installing the fast ethernet host adapters this chapter contains instructions about installing the iti5232e and iti5464e four port fast ethernet pci host adapters. this chapter describes these topics: ? section 1.1, ?eneral description, page 1-1 ? section 1.2, ?uick host adapter installation, page 1-2 1.1 general description the lsi logic iti5232e and iti5464e four port ethernet host adapters provide four fast (10/100 mbits/s) channels from a single pci host slot. these ethernet host adapters offer the highest degree of integration available for your pci-based computer system to ensure maximum network server performance. installing these adapters into your pci system allows connection of ethernet devices over an ethernet bus. each of the four ports is capable of running fast (100 mbits/s), fast full duplex, or 10 mbits/s for con?uration ?xibility. this con?uration allows a single card to communicate with fast or standard ethernet systems simultaneously. 1.1.1 features the iti5232e and iti5464e host adapters support these features: ? iti5232e - 32-bit direct memory access (dma) architecture iti5464e - 64-bit direct memory access (dma) architecture ? iti5232e - four independent 10/100 digital 21143-pc ethernet channels
1-2 installing the fast ethernet host adapters copyright 2000?001 by lsi logic corporation. all rights reserved. iti5464e - four independent 10/100 intel 21143-td ethernet channels ? jumperless ?lug and play implementation ? half and full duplex mode of operation ? speed, link status, transmit and receive activity leds ? 3.3 v and 5.0 v universal pci support 1.2 quick host adapter installation this section provides the system requirements and instructions for installing your iti5232e or iti5464e ethernet host adapter. 1.2.1 system requirements before you begin the installation procedure, you will need: ? a system that is compatible with the pci local bus speci?ation, revision 2.1 ? an available pci bus master expansion slot ? a ?ppy disk drive for loading the software drivers ? utp category 3, 4 or 5 cable (type dependant on your network type) note: for multichannel adapters such as the iti5232e and iti5464e, lsi logic requires that your host system ?mware or bios support pci bridging. if your host does not support pci bridging, contact your system vendor for a bios upgrade. if your system cannot be brought into compliance with the pci bridge speci?ation, then you will not be able to use multichannel ITIPCI host adapters.
quick host adapter installation 1-3 copyright 2000?001 by lsi logic corporation. all rights reserved. 1.2.2 installing the adapter to install a fast ethernet pci host adapter board, follow these steps: step 1. turn off the power to the computer system, and to all peripherals directly connected to the system (monitor, printer, external scsi enclosures, and other peripherals). step 2. unplug the system from the ac power line. step 3. open your pc cabinet by removing its cover. step 4. ground yourself before handling the host adapter board to discharge static electricity. you may use an antistatic strap or other precautions to avoid static discharge to your computer system or the fast ethernet host adapter. step 5. remove the host adapter board from its packing and examine it for any damage. retain the packing for future use. step 6. locate the slot for installing pci plug-in boards. step 7. remove the screw and metal bracket for the selected slot. step 8. insert your iti5232e or iti5464e fast ethernet host adapter board into the selected pci slot. step 9. make any con?uration changes. step 10. replace your pc cabinet cover. step 11. power up the peripherals, and then your computer. the host adapter installation is complete.
1-4 installing the fast ethernet host adapters copyright 2000?001 by lsi logic corporation. all rights reserved. figure 1.1 inserting the host adapter 64-bit slots bracket screw host adapter port connector(s) apply even pressure at both corners of card 32-bit slots
ITIPCI 5000 series fast ethernet pci host adapters 2-1 copyright 2000?001 by lsi logic corporation. all rights reserved. chapter 2 hardware speci?ations this chapter provides technical speci?ations for the iti5232e and iti5464e fast ethernet host adapters. it discusses these topics: ? section 2.1, ?ast ethernet host adapters, page 2-1 ? section 2.2, ?dapter speci?ations, page 2-2 ? section 2.3, ?onnectors and indicator leds, page 2-3 ? section 2.4, ?onnector pin assignments, page 2-5 ? section 2.5, ?abling requirements, page 2-7 2.1 fast ethernet host adapters table 2.1 describes the ITIPCI 5000 fast ethernet host adapters. the iti5232e and iti5464e modules are functionally similar but dimensionally the iti5464e meets pci short card speci?ations. see section 2.2, ?dapter speci?ations, page 2-2 for more information. table 2.1 ITIPCI fast ethernet host adapters host adapter description iti5232e-n four port fast ethernet adapter for windows nt, windows 2000, windows 95, and windows 98 operating systems that support sharing of pci interrupts. iti-5464e-i four port fast ethernet adapter for windows nt, windows 2000, windows 95, windows 98 operating systems that support sharing of pci interrupts
2-2 hardware speci?ations copyright 2000?001 by lsi logic corporation. all rights reserved. 2.2 adapter speci?ations table 2.2 provides the technical speci?ations for the iti5232e four port 10/100 ethernet pci host adapter. table 2.2 iti5232e fast ethernet host adapter speci?ations bus interface pci 32-bit bus master hardware interrupts iti5232e-n - supports shared interrupts base i/o addresses assigned by bios data transfer rates up to 800 mbits/s in fast full duplex mode power requirements pci universal 3.3 v or 5 v at 17 watts environmental ? operating temperature ? humidity ? altitude 0to55 c 5% to 85% noncondensing 3000 m maximum ethernet standards ieee 802.3 10base-t ieee 802.3u 100base-t certi?ations fcc class b ce class b ethernet electrical connections four female rj-45 connectors physical dimensions 9.0 x 4.2 inches 228.6 x 106.68 mm network speeds supported per ethernet network segment 10 mbits/s 20 mbits/s full duplex 100 mbits/s 200 mbits/s full duplex indication leds link, activity, and 100tx link for each channel
connectors and indicator leds 2-3 copyright 2000?001 by lsi logic corporation. all rights reserved. table 2.3 provides the technical speci?ations for the iti5464e four port 10/100 ethernet pci host adapter. 2.3 connectors and indicator leds the iti5232e and iti5464e provide four 8-pin modular jack (mj) connectors (also known as rj-45 connectors) for connection with your network. each of these four ports supports either twisted pair category 3 or 5 cable for 10 mbits/s connections, or category 5 cable for 100 mbits/s operation. figure 2.1 shows the iti5232e and iti5464e adapter connectors and indicator leds. table 2.3 iti5464e fast ethernet host adapter speci?ations bus interface pci 64-bit bus master hardware interrupts iti5464e-i - supports shared interrupts base i/o addresses assigned by bios data transfer rates up to 800 mbits/s in fast full duplex mode power requirements pci universal 3.3 v or 5 v at 17 watts environmental ? operating temperature ? humidity ? altitude 0to55 c 5% to 85% noncondensing 3000 m maximum ethernet standards ieee 802.3 10 base-t ieee 802.3u 100 base-t certi?ations fcc class b ce class b ethernet electrical connections four female rj-45 connectors physical dimensions 6.875 x 4.2 inches 174.625 x 106.68 mm network speeds supported per ethernet network segment 10 mbits/s 20 mbits/s full duplex 100 mbits/s 200 mbits/s full duplex indication leds link, activity, and 100tx link for each channel
2-4 hardware speci?ations copyright 2000?001 by lsi logic corporation. all rights reserved. figure 2.1 connectors and indicator leds table 2.4 describes each component as shown in figure 2.1 . port 0 port 1 port 2 port 3 port 0 port 1 port 2 port 3 1 2 3 4 5 6 7 8 table 2.4 connections and indicator leds for iti5232e and iti5464e reference component description 1 channel 0 8-pin rj-45 connector 10/100 mbits/s twisted-pair network connector for channel 0 2 channel 1 8-pin rj-45 connector 10/100 mbits/s twisted-pair network connector for channel 1 3 channel 2 8-pin rj-45 connector 10/100 mbits/s twisted-pair network connector for channel 2 4 channel 3 8-pin rj-45 connector 10/100 mbits/s twisted-pair network connector for channel 3 5 channel 0 indicator leds 100 mbits/s (left led) activity (center led) link (right led) 6 channel 1 indicator leds 100 mbits/s (left led) activity (center led) link (right led)
connector pin assignments 2-5 copyright 2000?001 by lsi logic corporation. all rights reserved. 2.4 connector pin assignments each of the four 8-pin rj-45 connectors for 10/100 mbytes/s are wired as shown in figure 2.2 . figure 2.2 8-pin rj-45 connector ta b l e b . 5 shows the connection pins that are assigned. 7 channel 2 indicator leds 100 mbits/s (left led) activity (center led) link (right led) 8 channel 3 indicator leds 100 mbits/s (left led) activity (center led) link (right led) table 2.4 connections and indicator leds for iti5232e and iti5464e (cont.) reference component description table b.5 8-pin rj-45 connector pin assignments pin number signal name 1 transmit + tx (+) 2 transmit ? tx ( ? ) 3 receive + rx (+) 4 no connection nc 5 no connection nc 6 receive ? rx ( ? ) 7 no connection nc 8 no connection nc 87654321
2-6 hardware speci?ations copyright 2000?001 by lsi logic corporation. all rights reserved. connection from the iti5232e or iti5464e adapter to a network hub must be made as shown in ta b l e b . 5 . connection from the iti5232e or iti5464e adapter to another network adapter (point-to-point) must be made as shown in ta b l e b . 7 . table b.6 adapter to network hub wiring straight through adapter pin hub pin tx (+) 1 ? 1 rx (+) tx ( ? )2 ? 2rx( ? ) rx (+) 3 ? 3 tx (+) 44 55 rx ( ? )6 ? 6tx( ? ) 77 88 table b.7 adapter to adapter (point-to-point) wiring crossover adapter 1 pin adapter 2 pin tx (+) 1 ? 3 rx (+) tx ( ? )2 ? 6rx( ? ) rx (+) 3 ? 1 tx (+) 44 55 rx ( ? )6 ? 2tx( ? ) 77 88
cabling requirements 2-7 copyright 2000?001 by lsi logic corporation. all rights reserved. 2.5 cabling requirements in order for your network to operate properly, you must use a category of network cabling that is appropriate for the data rate of the channel. for 10 mbits/s operation, category 3, 4, or 5 cable is appropriate. when operating in 100 mbits/s or 100 mbits/s full duplex, a category 5 cable should be used. the maximum cable segment length supported at 100 mbits/s speed, on category 5 cable is 100 m. any single cable segment (adapter to adapter or adapter to network hub) must be within the 100 m length requirement.
2-8 hardware speci?ations copyright 2000?001 by lsi logic corporation. all rights reserved.
ITIPCI 5000 series fast ethernet pci host adapters 3-1 copyright 2000?001 by lsi logic corporation. all rights reserved. chapter 3 network device driver installation this chapter provides instructions for installing your network device driver on various operating systems. it includes these topics: ? section 3.1, ?indows device driver installation, page 3-1 ? section 3.2, ?etware device driver installation, page 3-8 ? section 3.3, ?inux device driver installation, page 3-9 ? section 3.4, ?ompaq tru64 unix device driver installation, page 3-9 ? section 3.5, ?igital openvms, page 3-10 ? section 3.6, ?roubleshooting, page 3-11 3.1 windows device driver installation the iti5232e and iti5464e four port fast ethernet host adapters use the industry leading fast network engine, which is the intel 21143 pci mac. the digital dc21x4.sys miniport driver supports the four ethernet channels on each host adapter. note: digitals alpha systems use a dynamic link library ?e (dll) called a hardware abstraction layer (hal). this ?e can be found on your boot disk at the location \os\hal.dll . this is a system ?e and is hidden. you must use the ?how system and hidden ?es option under explorer to see this ?e. certain alpha systems will hang (wait forever) after installing multiport ethernet cards unless this ?e is updated to hal.dll dated on or after 26-may-1998.
3-2 network device driver installation copyright 2000?001 by lsi logic corporation. all rights reserved. if you experience this hang, shut down the machine, and remove the iti5232e or iti5464e board from your system. contact digital for an updated hal ?e and installation instructions. 3.1.1 for windows nt this section provides instructions about installing the miniport driver to new and existing windows nt systems. the choices that you are given may vary slightly from these examples based on your machines current network con?uration and options. see your system administrator for any additional information. 3.1.1.1 new system installation to install windows nt on a new system, the system bios must support booting from a cd-rom. windows nt automatically adds the driver to the registry and copies the driver to the appropriate directory. to install windows nt from a boot diskette, refer to the microsoft windows nt documentation for more information. the network driver is bundled with the windows nt operating system, and there is automatic installation of your network driver. thus, no user action is required as they will be loaded from the cd-rom. follow the microsoft windows nt prompts to complete the installation. to verify the installation, follow these steps. step 1. click on the start button. select settings-->control panel. step 2. double click on the network icon. step 3. click on the adapters tab. the system displays the four controllers for your fast ethernet host adapter. step 4. select one controller and right click on your mouse. step 5. select properties to see more information.
windows device driver installation 3-3 copyright 2000?001 by lsi logic corporation. all rights reserved. 3.1.1.2 existing system installation follow the instructions about installing your fast ethernet host adapter into your computer. be sure to have your windows nt distribution media available prior to starting this procedure. to install the network driver on your fast ethernet host adapter, follow these steps: step 1. boot windows nt and log on as administrator. step 2. click on the start button. move to settings-->control panel. step 3. select the network icon from the control panel menu. a dialog box may appear and prompt you with this question: do you want to install nt networking? step 4. select yes and continue. the network setup wizard window appears. go to the next step. or select no and continue if you just want to add the drivers without being wired to a network. refer to your microsoft documentation concerning this option. step 5. choose the appropriate settings for your system. step 6. click on the next button. step 7. click on start search button. step 8. click on find next. the system displays: dec pci fast ethernet pci chip 21142 [detected]. step 9. click on the next button. step 10. click on protocols. step 11. follow the windows nt prompts. step 12. click on the next button. the system copies ?es. step 13. place the windows nt installation media in the cd-rom drive, and complete the windows nt network installation.
3-4 network device driver installation copyright 2000?001 by lsi logic corporation. all rights reserved. consult the microsoft windows nt documentation if you are unfamiliar with this process. step 14. follow the on-screen prompts until you are prompted for a network adapter type. step 15. select the adapters tab from the ?etwork dialog box? step 16. select ?ntraserver iti5232e four port 10/100 mbits/s ethernet or ?ntraserver iti5464e four port 10/100 mbits/s ethernet adapter, and click on the ok button. a ?onnection type dialog box appears and allows you to select the connection type appropriate for your network con?uration. step 17. to select the default connection type for most network connections, choose autosense. or to change the media connection type, be certain to select the correct connection type for your network. if not, the adapter port will not ?ink to the network. step 18. click on the continue button. step 19. upon completion, the selected adapter port(s) is added to the installed adapter cards list in the network setting box (the number pre?ing the adapter is the adapter port number). step 20. click on the ok button to complete the network setting initialization. based on the protocols you are running, one or more dialog boxes may appear. see your network administrator for appropriate settings for your network for each of the dialog boxes. step 21. click on the finish button. the system prompts you about restarting your computer. step 22. click on the yes button to restart your system.
windows device driver installation 3-5 copyright 2000?001 by lsi logic corporation. all rights reserved. 3.1.2 for windows 2000 this section provides instructions about installing the miniport driver onto new and existing windows 2000 systems. the choices you are given may vary slightly from these examples based on your machines current network con?uration and options. see your system administrator for any additional information. 3.1.2.1 new system installation to install windows 2000 on a new system, the system bios must support booting from a cd-rom. windows 2000 automatically adds the driver to the registry and copies the driver to the appropriate directory. to install windows 2000 from a boot diskette, refer to the microsoft windows 2000 documentation for more information. the driver is bundled with the windows 2000 operating system, so no user action is required as they will be loaded from the cd-rom automatically. refer to your microsoft windows 2000 documentation for more information on new system installations. to verify the driver has been installed, follow the instructions under existing system installation. 3.1.2.2 existing system installation follow the instructions about installing your fast ethernet host adapter into your computer. to verify your network drivers have been installed upon detecting your fast ethernet adapter, follow these steps: step 1. boot windows 2000 and log on as administrator. step 2. click on the start button. move to settings-->network & dial up connection the system displays a list of the four channels installed. step 3. click on one of the channels and select properties. a window appears to display the connection. you will see a message similar to this: cabletron de5008 pci fast ethernet adapter step 4. click on the ok button. windows 2000 performs an automatic installation of network drivers for all channels.
3-6 network device driver installation copyright 2000?001 by lsi logic corporation. all rights reserved. 3.1.3 for windows 95 and windows 98 this section provides instructions about installing the miniport driver onto new and existing windows 95 or windows 98 systems. the choices you are given may vary slightly from these examples based on your machines current network con?uration and options. see your system administrator for any additional information. 3.1.3.1 new system installation follow these instructions for new system installations: step 1. start the windows 95 or windows 98 setup according to the microsoft windows instructions. step 2. setup enters the hardware detection phase after a system reboot. if a message appears that the pci fast ethernet adapter was found, then the bundled driver supports this host adapter. step 3. follow the windows 95 or windows 98 prompts to complete the installation. after the windows 95 or windows 98 installation has completed, you can install the driver according to the existing system installation instructions. 3.1.3.2 existing system installation be sure to have the windows 95 or windows 98 distribution media available prior to starting this procedure. to install the device driver onto your fast ethernet adapter when the windows 95 or windows 98 operating system exists, follow these steps: step 1. boot windows 95 or windows 98. when windows 95 or windows 98 detects the new hardware, this message appears: new hardware found, pci ethernet controller the system displays the add new hardware wizard dialog box. the add new hardware wizard window appears and identi?s the pci fast ethernet dec21143 board adapter.
windows device driver installation 3-7 copyright 2000?001 by lsi logic corporation. all rights reserved. step 2. click on the next button. the system searches for the default driver. step 3. click on the next button. the system searches for a location and displays c:\windows\inf . step 4. click on the next button. the system prompts with this question:\ what do you want to install? another message appears and states the system has found the driver. step 5. click on the next button. windows 95 or windows 98 is now ready to install the driver and lists the location of the driver. step 6. click on the next button to continue. the system installs the driver. the system displays this message: please insert the disk labelled windows 95 or windows 98 cd-rom. step 7. insert the windows 95 or windows 98 cd-rom into your cd-rom drive and click on the ok button. the system copies ?es from this windows 95 or windows 98 cd-rom and rebuilds the driver database. step 8. click on the finish button. the system displays this message: to ?ish setting up your new hardware, you must restart your computer. step 9. click on the yes button to restart you computer. the driver has now been added to one channel of your four port fast ethernet adapter. upon rebooting, the system detects another channel and repeats the process above. since there are four channels, you will repeat this process for the second to the fourth channel.
3-8 network device driver installation copyright 2000?001 by lsi logic corporation. all rights reserved. 3.2 netware device driver installation the novell netware driver, dc21x4, is used with both netware 3.1x and netware 4.xx servers. refer to your ?e server installation instructions in the novell netware installation manual for more details. 3.2.1 netware 3.1x system to install the netware 3.1.x device driver, follow these steps: step 1. prepare the hard drives of your server according to the instructions in your netware 3.1x documentation. step 2. while the server is down, insert the setup diskette into your servers a: drive. step 3. copy the contents of a:\netware\311 or a:\netware\312 to the disk from which you boot netware 3.1x. step 4. type server at the dos prompt and press enter to boot the netware 3.1x server. step 5. type at the server console prompt: load install and press enter. step 6. select system options. step 7. select edit autoexec.ncf file step 8. edit the autoexec.ncf ?e. you must load the device driver once for each port used. 3.2.2 netware 4.x and 4.11 systems to install the netware 4.x and 4.11 device driver, follow these steps: step 1. type at the server console prompt: load install and press enter. the system displays the installation options menu. step 2. select driver options to load/unload disk and network drivers.
linux device driver installation 3-9 copyright 2000?001 by lsi logic corporation. all rights reserved. the system displays the driver options menu. step 3. select con?ure network drivers. the system displays the installed network drivers, and the additional driver actions menu step 4. select a driver and press enter. if the desired driver is not on the list, proceed to step 5. step 5. insert the setup diskette into drive a:. step 6. use the ins key to install the unlisted driver. step 7. press enter. the system scans path a:\ for uninstalled drivers. step 8. press enter to install the netware 4.xx or 4.11 driver located on the setup diskette in drive a:. step 9. select yes to copy the driver dc21x4. step 10. enter information as prompted. you may modify the adapters default con?uration by changing its parameters when prompted. the default settings provide best results in most cases. 3.3 linux device driver installation contact the technical support team for information regarding drivers, installation, and support for linux by visiting the lsi logic web site at: http://www.lsilogic.com/support. 3.4 compaq tru64 unix device driver installation drivers for the iti5232e and iti5464e are on the compaq tru64 unix distribution kit beginning with version 4.0d. compaq tru64 unix will identify the iti5232e and iti5464e as four 21140 based ethernet controllers.
3-10 network device driver installation copyright 2000?001 by lsi logic corporation. all rights reserved. to install the digital unix device driver, follow these steps: step 1. boot your system using genvmunix , in the following manner: boot ?ile genvmunix a digital unix system scans all hardware devices in the system, and identi?s the iti5232e or iti5464e as four 21140 based ethernet adapters. step 2. create a new kernel with support for the four ethernet ports, identi?d in genvmunix by typing at the command prompt: # doconfig step 3. when doconfig completes, backup your existing kernel as follows: # cp /vmunix /vmunix.sav step 4. copy the new kernel created by doconfig to the /vmunix directory . step 5. shutdown and reboot your system with your new kernel. impor tant: refer to your digital unix documentation for additional information about the doconfig command. digital unix relies on the settings for media type and speed set by the srm console. see appendix a ?sing digital srm console settings for more information. 3.5 digital openvms drivers for the iti5232e and iti5464e host adapters are on the digital openvms distribution kit beginning with version 7.1. digital openvms identi?s the iti5232e or iti5464e as four 21140 based adapters. follow the documentation for the network software that you will run on the adapter for speci? con?uration information. note 1: digital openvms relies on the settings for media type and speed set by the srm console. see appendix a ?sing digital srm console settings for more information.
troubleshooting 3-11 copyright 2000?001 by lsi logic corporation. all rights reserved. note 2: if you are connecting ?oint to point to another adapter, do not select autosense for ewa0_mode . also, many hubs do not support autosense, it is therefore recommended that the correct media type and speed are selected manually. 3.6 troubleshooting some potential problems and their suggested solutions for windows nt and windows 95 installations are provided in this section. 3.6.1 windows nt the most common problem encountered on windows nt for ethernet devices is a mismatch of the ports speed and media settings to those in use on the network. the most simple check of correct cabling is to observe the status lights on the handle of the card. once the card is installed in the system, the software is installed, and the module is wired to your network hub, the link light should be illuminated. if link fails to light, check that your cable type and media settings are correct. refer to section 2.4, ?onnector pin assignments, page 2-5 for more information about cable con?urations. if you are connected to a fast hub, the adapter must be set to auto, fast, or fast full duplex. the setting depends on the capability of your hub. if you are connected to a 10 mbits/s hub, the adapter must be set to auto, twisted pair, or twisted pair full duplex. the setting depends upon the capability of your hub. note: if you are certain your cable type is correct, but you are not seeing link, set the port to match the hub port exactly (for example: fast, not auto). some hubs have trouble with cards set to autonegotiate. cables from the iti5232e or iti5464e to a hub must not be crossover. cables from the iti5232e to another iti-5232e must be crossover. cables from the iti5464e to another iti5464e must be crossover.
3-12 network device driver installation copyright 2000?001 by lsi logic corporation. all rights reserved. 3.6.2 windows nt error messages the error messages are logged in the windows nt error log and can be seen using the error log viewer (in the windows nt administration tools group). each error message has a standard ndis error code and a driver's additional code. the additional codes are listed in table 3.1 . 3.6.3 driver initialization error messages the windows nt operating system may display some driver initialization error messages that may be preceded by a warning message. ndis_error_code_unsupported_configuration dc21x4_errmsg_registry the adaptertype registry's key is missing or its value is unsupported by the adapter board. ndis_error_code_adapter_not_found no board matching the adaptercfid registry's key value was found plugged into the pci bus or in the slot speci?d in the registry. ndis_error_code_out_of_resources dc21x4_errmsg_alloc_memory table 3.1 dc21x4 nt driver error codes error message code dc21x4_errmsg_registry 0x01 dc21x4_errmsg_alloc_memory 0x02 dc21x4_errmsg_srom 0x03 dc21x4_errmsg_media 0x04 dc21x4_errmsg_load_cam 0x05 dc21x4_errmsg_system_error 0x06 dc21x4_errmsg_txm_jabber_timeout 0x07
troubleshooting 3-13 copyright 2000?001 by lsi logic corporation. all rights reserved. not enough memory to allocate space for the adapter data block. ndis_error_code_invalid_value_from_adapter dc21x4_errmsg_srom invalid data read from the adapter's serial rom. ndis_error_code_network_address no readable burnt_in or software con?ured station address. ndis_error_code_unsupported_configuration dc21x4_errmsg_media the selected media port is not supported by the board. ndis_error_code_interrupt_connect interrupt initialization has failed. ndis_error_code_timeout dc21x4_errmsg_load_cam dc21x4 cam initialization has failed. 3.6.4 driver run-time error messages the windows nt operating system may display some driver run-time error messages that may be preceded by a warning message. ndis_error_code_hardware_failure dc21x4_errmsg_system_error system_error interrupt (bus parity error) ndis_error_code_hardware_failure dc21x4_errmsg_txm_jabber_timeout transmit jabber timer has expired. 3.6.5 windows 95/windows 98 if the ethernet adapter is not detected by windows 95/windows 98 after installing it and rebooting windows 95/windows 98, follow these steps: step 1. double click on my computer-->control panel-->system to display the system properties window.
3-14 network device driver installation copyright 2000?001 by lsi logic corporation. all rights reserved. step 2. select the device manager tab from the system properties window in order to view the list of devices in the pc. step 3. check the list of devices for an entry labeled other devices. if an other devices entry exists, double click on it to display the list of devices under it. step 4. check the list for an entry labeled pci ethernet controller. if this exists, click on it to highlight it. step 5. click on the remove button at the bottom of the windows to delete it. step 6. reboot your computer and the ethernet adapter should now be detected.
ITIPCI 5000 series fast ethernet pci host adapters a-1 copyright 2000?001 by lsi logic corporation. all rights reserved. appendix a using digital srm console settings when the iti5232e or iti5464e is being used in a digital alpha platform running openvms or digital unix, the srm console is used to set the port speed, media (cable) type and boot protocols, and can also be used to test the module. after powering your system up, and before booting your operating system, the system will stop at the srm console prompt. on a uniprocessor machine, the srm prompt is >>> and on the primary processor of a multiprocessor machine, is p0>>> ? digital uses a set of ?nvironment variables to store the settings of certain user de?able parameters, which are passed to the operating system to allow the users con?uration information to stay consistent when the srm passes control of the system to the operating system. a.1 displaying and setting ethernet port characteristics the alpha console recognizes the ethernet device as an ew port. there are two commands that are necessary for setting and showing the ethernet port: set and show . use show to display characteristics of the ethernet port. >>>show ewn0_mode where ? is the ethernet port letter. use set to set characteristics of the ethernet port. the available settings for ethernet media type are shown in table a.1 .
a-2 using digital srm console settings copyright 2000?001 by lsi logic corporation. all rights reserved. for example, to set the media type and speed to fast twisted-pair, enter the command: >>>set ewa0_mode fast if you will be remote booting through the ethernet, you must also set the boot protocol to match that of the boot node. typically openvms uses mop protocol and unix uses bootp. for example to set a port to mop (vms) use: >>>set ewa0_protocol mop note: port 0 will be the lowest controller letter found by the srm console, ? if there are no other ethernet ports in the system. if there is an onboard ethernet controller, it will be assigned port letter ? and the ports on your iti-5232 will be assigned ?, c, d, and e for ports ?, 1, 2, and 3 respectively. table a.1 digital unix and open vms srm console media selection parameter settings description ewn0_mode twisted-pair 10 mbits/s twisted-pair fast 100 mbits/s twisted-pair half duplex full duplex twisted-pair full duplex twisted-pair aui not supported bnc not supported fast fd fast full duplex
ITIPCI 5000 series fast ethernet pci host adapters ix-1 copyright 2000?001 by lsi logic corporation. all rights reserved. index numerics 8-pin modular jack (mj) (rj-45) connectors for connection to your network 2-3 a adapter to adapter wiring 2-6 adapter to network hub wiring 2-6 altitude iti5232e 2-2 iti5464e 2-3 b base i/o addresses iti5232e 2-2 iti5464e 2-3 bus interface iti5232e 2-2 iti5464e 2-3 c cabling requirements 2-7 certifications iti5232e 2-2 iti5464e 2-3 compaq tru64 unix device driver installation instructions 3-9 connector pin assignments 2-5 d data transfer rates iti5232e 2-2 iti5464e 2-3 digital openvms device driver installation instructions 3-10 digital unix a-1 driver initialization error messages windows nt 3-12 driver run-time error messages windows nt 3-13 e environment iti5232e 2-2 iti5464e 2-3 error messages windows nt 3-12 ethernet electrical connections iti5232e 2-2 iti5464e 2-3 ethernet standards iti5232e 2-2 iti5464e 2-3 f features iti5232e and iti5464e 1-1 h hardware interrupts iti5232e 2-2 iti5464e 2-3 hub wiring adapter to network 2-6 humidity iti5232e 2-2 iti5464e 2-3 i interrupt assignments for iti5232e and iti5464e 2-1 iti5232e adapter specifications 2-2 board dimensions 2-2 leds 2-2 iti5464e adapter specifications 2-3 board dimensions 2-3 leds 2-3 l leds iti5232e 2-2 iti5464e 2-3 linux device driver installation instructions 3-9
ix-2 copyright 2000?001 by lsi logic corporation. all rights reserved. n ndis_error_code error messages 3-12 netware 3.1x device driver installation instructions 3-8 netware 4.x/4.11 device driver installation instructions 3-8 network speeds iti5232e 2-2 iti5464e 2-3 o openvms a-1 operating temperature iti5232e 2-2 iti5464e 2-3 p physical dimensions iti5232e 2-2 iti5464e 2-3 power requirements iti5232e 2-2 iti5464e 2-3 q quick host adapter installation 1-2 r rj-45 connectors ethernet electrical connections 2-2 , 2-3 s setting ethernet port characteristics a-1 single cable segment 100 m length requirement 2-7 srm console a-1 t troubleshooting windows 95/windows 98 3-13 windows nt 3-11 twisted pair category 3 or 5 cable for 10 mbits/s operation 2-3 category 5 cable for 100 mbits/s operation 2-3 w windows 2000 existing system installation 3-5 new system installation 3-5 windows 95/windows 98 existing system installation 3-6 new system installation 3-6 troubleshooting 3-13 windows nt driver initialization error messages 3-12 driver run-time error messages 3-13 error messages 3-12 existing system installation 3-3 new system installation 3-2 troubleshooting 3-11 wiring adapter to adapter 2-6 adapter to network 2-6
ITIPCI 5000 series fast ethernet pci host adapter copyright 2000?001 by lsi logic corporation. all rights reserved. customer feedback we would appreciate your feedback on this document. please copy the following page, add your comments, and fax it to us at the number shown. if appropriate, please also fax copies of any marked-up pages from this document. impor tant: please include your name, phone number, fax number, and company address so that we may contact you directly for clari?ation or additional information. thank you for your help in improving the quality of our documents.
customer feedback copyright 2000?001 by lsi logic corporation. all rights reserved. readers comments fax your comments to: lsi logic corporation technical publications m/s e-198 fax: 408.433.4333 please tell us how you rate this document: ITIPCI 5000 series fast ethernet pci host adapter. place a check mark in the appropriate blank for each category. what could we do to improve this document? if you found errors in this document, please specify the error and page number. if appropriate, please fax a marked-up copy of the page(s). please complete the information below so that we may contact you directly for clari?ation or additional information. excellent good average fair poor completeness of information ____ ____ ____ ____ ____ clarity of information ____ ____ ____ ____ ____ ease of ?ding information ____ ____ ____ ____ ____ technical content ____ ____ ____ ____ ____ usefulness of examples and illustrations ____ ____ ____ ____ ____ overall manual ____ ____ ____ ____ ____ name date telephone title company name street city, state, zip department mail stop fax
you can ?d a current list of our u.s. distributors, international distributors, and sales of?es and design resource centers on our web site at http://www.lsilogic.com/contacts/na_salesof?es.html

▲Up To Search▲

Price & Availability of ITIPCI

	To Download ITIPCI Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .