View ACT108-600E_3239350.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1. product profile 1.1 general description ac thyristor power switch in a sot54 plas tic package with self-p rotective capabilities against low and high energy transients 1.2 features and benefits ? exclusive negative gate triggering ? full cycle ac conduction ? remote gate separa tes the gate driver from the effects of the load current ? safe clamping of low energy over-voltage transients ? self-protective turn-on during high energy voltage transients ? very high noise immunity 1.3 applications ? fan motor circuits ? lower-power highly inductive, resistive and safety loads ? pump motor circuits 1.4 quick reference data ACT108-600E ac thyristor power switch rev. 3 ? 13 july 2010 product data sheet table 1. quick reference data symbol parameter conditions min typ max unit v drm repetitive peak off-state voltage --600v i gt gate trigger current v d =12v; i t = 100 ma; ld+ g-; t j =25c; see figure 6 1- 10ma v d =12v; i t = 100 ma; ld- g-; t j =25c 1- 10ma i t(rms) rms on-state current full sine wave; t lead 71 c; see figure 2 --0.8a dv d /dt rate of rise of off-state voltage v dm =402v; t j = 125 c; gate open circuit; see figure 10 1000 - - v/s v cl clamping voltage i cl = 100 a; t p =1ms; t j 125 c; see figure 13 650--v v pp peak pulse voltage t j = 25 c; non-repetitive, off-state; see figure 1 --2kv v t on-state voltage i t = 1.1 a; see figure 9 --1.3v
ACT108-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 3 ? 13 july 2010 2 of 13 nxp semiconductors ACT108-600E ac thyristor power switch 2. pinning information 3. ordering information table 2. pinning information pin symbol description simplified outline graphic symbol 1cmcommon sot54 (to-92) 2 g gate 3 ld load 1 2 3 001aaj924 g cm ld table 3. ordering information type number package name description version ACT108-600E to-92 plastic single-ended leaded (through hole) package; 3 leads sot54
ACT108-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 3 ? 13 july 2010 3 of 13 nxp semiconductors ACT108-600E ac thyristor power switch 4. limiting values table 4. limiting values in accordance with the absolute maxi mum rating system (iec 60134). symbol parameter conditions min max unit v drm repetitive peak off-state voltage - 600 v i t(rms) rms on-state current full sine wave; t lead 71 c; see figure 2 -0.8a i tsm non-repetitive peak on-state current full sine wave; t j(init) =25c; t p =16.7ms -8.8a full sine wave; t j(init) =25c; t p = 20 ms; see figure 3 ; see figure 4 -8a i 2 ti 2 t for fusing t p = 10 ms; sine-wave pulse - 0.32 a 2 s di t /dt rate of rise of on-state current i t =1a; i g =20ma; di g /dt = 0.2 a/s - 100 a/s i gm peak gate current t = 20 s-1a v gm peak gate voltage positive applied gate voltage - 15 v p g(av) average gate power over any 20 ms period - 0.1 w t stg storage temperature -40 150 c t j junction temperature - 125 c v pp peak pulse voltage t j = 25 c; non-repetitive, off-state; see figure 1 -2kv fig 1. test circuit for inductive and resistive lo ads with conditions equivalent to iec 61000-4-5 003aad077 l r 150 5 h 2 220 r g surge generator surge pulse iec 61000-4-5 standards r gen open circuit voltage dut load model 1.2 s/50 s waveform
ACT108-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 3 ? 13 july 2010 4 of 13 nxp semiconductors ACT108-600E ac thyristor power switch = conduction angle fig 2. total power dissipation as a function of rms on-state cu rrent; maximum values f = 50 hz fig 3. non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum values 003aac803 0 0.2 0.4 0.6 0.8 1.0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 i t(rms) (a) (w) p tot = 180 003aac804 0 2 4 6 8 10 11010 2 10 3 number of cycles i tsm (a) i tsm t i t t j(init) = 25 c max 1/f
ACT108-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 3 ? 13 july 2010 5 of 13 nxp semiconductors ACT108-600E ac thyristor power switch 5. thermal characteristics t p 20 ms fig 4. non-repetitive peak on-state current as a function of pulse width; maximum values 003aac805 1 10 10 2 10 3 10 ? 5 10 ? 4 10 ? 3 10 ? 2 t p (s) i tsm (a) i tsm t i t t j(init) = 25 c max t p table 5. thermal characteristics symbol parameter conditions min typ max unit r th(j-lead) thermal resistance from junction to lead full cycle with heatsink compound; see figure 5 --60k/w r th(j-a) thermal resistance from junction to ambient full cycle; printed-circuit board mounted; lead length 4 mm - 150 - k/w fig 5. transient thermal impedance from juncti on to lead as a function of pulse width 10 ? 1 10 ? 2 1 10 z th(j-lead) (k/w) t p (s) 10 ? 5 110 10 ? 1 10 ? 2 10 ? 4 10 ? 3 10 2 003aad294 t p p t
ACT108-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 3 ? 13 july 2010 6 of 13 nxp semiconductors ACT108-600E ac thyristor power switch 6. characteristics table 6. characteristics symbol parameter conditions min typ max unit i gt gate trigger current v d =12v; i t = 100 ma; ld+ g-; t j =25c; see figure 6 1- 10ma v d =12v; i t = 100 ma; ld- g-; t j =25c 1- 10ma i l latching current v d =12v; i g =12ma; t j =25c; see figure 7 --30ma i h holding current v d =12v; t j =25c; see figure 8 -925ma v t on-state voltage i t = 1.1 a; see figure 9 --1.3v v gt gate trigger voltage v d =12v; i t =100ma; t j 125 c 0.15 - - v v d =12v; i t =100ma; t j =25c --1v i d off-state current v d =600v; t j 125 c - - 0.2 ma v d =600v; t j 25 c - - 2 a dv d /dt rate of rise of off-state voltage v dm =402v; t j = 125 c; gate open circuit; see figure 10 1000 - - v/s di com /dt rate of change of commutating current v d =400v; t j = 125 c; i t(rms) =1a; dv com /dt = 15 v/s; gate open circuit; see figure 11 ; see figure 12 0.3--a/ms v cl clamping voltage i cl = 100 a; t p =1ms; t j 125 c; see figure 13 650 - - v (1) ld+ g- (2) ld- g- fig 6. normalized gate trigger current as a function of junction temperature fig 7. normalized latching current as a function of junction temperature i gt i gt(25 c) t j ( c) ? 50 0 150 100 50 1 2 3 0 003aac809 (1) (2) (1) (2) t j ( c) ? 50 150 100 050 003aac811 1 2 3 0 i l i l(25 c)
ACT108-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 3 ? 13 july 2010 7 of 13 nxp semiconductors ACT108-600E ac thyristor power switch v o = 0.758 v; r s = 0.263 ? (1)t j = 125 c; typical values (2)t j = 125 c; maximum values (3)t j = 25 c; maximum values fig 8. normalized holding current as a function of junction temperature fig 9. on-state current as a function of on-state voltage a is dv d /dt at condition t j c b is dv d /dt at condition t j 125 c a is di com /dt at condition t j c b is di com /dt at condition t j 125 c v d = 400 v fig 10. normalized rate of rise of off-s tate voltage as a function of junction temperature fig 11. normalized critical rate of rise of commutating current as a function of junction temperature t j ( c) ? 50 150 100 050 003aac810 1 2 3 0 i h i h(25 c) 003aac812 0.0 0.5 1.0 1.5 2.0 0.0 0.5 1.0 1.5 2.0 v t (v) i t (a) (1) (2) (3) t j ( c) 25 125 100 50 75 003aac813 4 8 12 0 a b 10 6 2 t j ( c) 25 125 100 50 75 003aac814 4 8 12 0 a b
ACT108-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 3 ? 13 july 2010 8 of 13 nxp semiconductors ACT108-600E ac thyristor power switch a[b] is di com /dt at condition b, dv com /dt a[spec] is the specified data sheet value of di com /dt turn-off time < 20 ms fig 12. normalized critical rate of change of commutating current as a function of critical rate of change of commutating voltage; minimum values fig 13. normalized clamping voltage (upper limit) as a function of junction temperature; minimum values 003aac815 0 0.5 1.0 1.5 2.0 10 ? 1 11010 2 b (v/ s) a [b] a [spec] t j ( c) ? 50 150 100 050 003aac817 0.4 0.8 1.2 0 v cl v cl(25 c)
ACT108-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 3 ? 13 july 2010 9 of 13 nxp semiconductors ACT108-600E ac thyristor power switch 7. package outline fig 14. package outline sot54 (to-92) unit a references outline version european projection issue date iec jedec jeita mm 5.2 5.0 b 0.48 0.40 c 0.45 0.38 d 4.8 4.4 d 1.7 1.4 e 4.2 3.6 l 14.5 12.7 e 2.54 e 1 1.27 l 1 (1) max. 2.5 b 1 0.66 0.55 dimensions (mm are the original dimensions) note 1. terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. sot54 to-92 sc-43a 04-06-28 04-11-16 a l 0 2.5 5 mm scale b c d b 1 l 1 d e plastic single-ended leaded (through hole) package; 3 leads sot5 4 e 1 e 1 2 3
ACT108-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 3 ? 13 july 2010 10 of 13 nxp semiconductors ACT108-600E ac thyristor power switch 8. revision history table 7. revision history document id release date data sheet status change notice supersedes ACT108-600E v.3 20100713 product data sheet - ACT108-600E v.2 modifications: ? various changes to content. ACT108-600E v.2 20091021 product data sheet - -
ACT108-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 3 ? 13 july 2010 11 of 13 nxp semiconductors ACT108-600E ac thyristor power switch 9. legal information 9.1 data sheet status [1] please consult the most recently issued document before initiating or completing a design. [2] the term 'short data sheet' is explained in section "definitions". [3] the product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple de vices. the latest product status information is available on the internet at url http://www.nxp.com . 9.2 definitions draft ? the document is a draft version only. the content is still under internal review and subject to formal approval, which may result in modifications or additions. nxp semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall hav e no liability for the consequences of use of such information. short data sheet ? a short data sheet is an extract from a full data sheet with the same product type number(s) and title. a short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. for detailed and full information see the relevant full data sheet, which is available on request vi a the local nxp semiconductors sales office. in case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. product specification ? the information and data provided in a product data sheet shall define the specification of the product as agreed between nxp semiconductors and its customer , unless nxp semiconductors and customer have explicitly agreed otherwis e in writing. in no event however, shall an agreement be valid in which the nxp semiconductors product is deemed to offer functions and qualities beyond those described in the product data sheet. 9.3 disclaimers limited warranty and liability ? information in this document is believed to be accurate and reliable. however, nxp semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. in no event shall nxp semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interrupt ion, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. notwithstanding any damages that customer might incur for any reason whatsoever, nxp semiconductors? aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the terms and conditions of commercial sale of nxp semiconductors. right to make changes ? nxp semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. this document supersedes and replaces all information supplied prior to the publication hereof. suitability for use ? nxp semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an nxp semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. nxp semiconductors accepts no liability for inclusion and/or use of nxp semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer?s own risk. applications ? applications that are described herein for any of these products are for illustrative purpos es only. nxp semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. nxp semiconductors does not accept any liability related to any default, damage, costs or problem which is based on a weakness or default in the customer application/use or the application/use of customer?s third party customer(s) (hereinafter both referred to as ?application?). it is customer?s sole responsibility to check whether the nxp semiconductors product is suitable and fit for the application planned. customer has to do all necessary testing for the application in order to avoid a default of the application and the product. nxp semiconducto rs does not accept any liability in this respect. quick reference data ? the quick reference data is an extract of the product data given in the limiting values and characteristics sections of this document, and as such is not comp lete, exhaustive or legally binding. limiting values ? stress above one or more limiting values (as defined in the absolute maximum ratings system of iec 60134) will cause permanent damage to the device. limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the recommended operating conditions section (if present) or the characteristics sections of this document is not warranted. constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. terms and conditions of commercial sale ? nxp semiconductors products are sold subject to the gener al terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , unless otherwise agreed in a valid written individual agreement. in case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. nxp semiconductors hereby expressly objects to applying the customer?s general terms and conditions with regard to the purchase of nxp semiconducto rs products by customer. no offer to sell or license ? nothing in this document may be interpreted or construed as an offer to sell products t hat is open for acceptance or the grant, conveyance or implication of any lic ense under any copyrights, patents or other industrial or intellectual property rights. export control ? this document as well as th e item(s) described herein may be subject to export control regulati ons. export might require a prior authorization from national authorities. document status [1] [2] product status [3] definition objective [short] data sheet development this document contains data from the objective specification for product development. preliminary [short] data sheet qualific ation this document contains data fr om the preliminary specification. product [short] data sheet production this doc ument contains the product specification.
ACT108-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 3 ? 13 july 2010 12 of 13 nxp semiconductors ACT108-600E ac thyristor power switch non-automotive qualified products ? unless this data sheet expressly states that this specific nxp semicon ductors product is automotive qualified, the product is not suitable for automotive use. it is neither qualified nor tested in accordance with automotive testing or application requirements. nxp semiconductors accepts no liabili ty for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. in the event that customer uses t he product for design-in and use in automotive applications to automotive s pecifications and standards, customer (a) shall use the product without nxp semiconductors? warranty of the product for such automotive applicat ions, use and specifications, and (b) whenever customer uses the product for automotive applications beyond nxp semiconductors? specifications such use shall be solely at customer?s own risk, and (c) customer fully in demnifies nxp semi conductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive appl ications beyond nxp semiconductors? standard warranty and nxp semicond uctors? product specifications. 9.4 trademarks notice: all referenced brands, produc t names, service names and trademarks are the property of their respective owners. adelante , bitport , bitsound , coolflux , coreuse , desfire , ez-hv , fabkey , greenchip , hipersmart , hitag , i2c-bus logo, icode , i-code , itec , labelution , mifare , mifare plus , mifare ultralight , moreuse , qlpak , silicon tuner , siliconmax , smartxa , starplug , topfet , trenchmos , trimedia and ucode ? are trademarks of nxp b.v. hd radio and hd radio logo ? are trademarks of ibiquity digital corporation. 10. contact information for more information, please visit: http://www.nxp.com for sales office addresses, please send an email to: salesaddresses@nxp.com
nxp semiconductors ACT108-600E ac thyristor power switch ? nxp b.v. 2010. all rights reserved. for more information, please visit: http://www.nxp.com for sales office addresses, please se nd an email to: salesaddresses@nxp.com date of release: 13 july 2010 document identifier: ACT108-600E please be aware that important notices concerning this document and the product(s) described herein, have been included in section ?legal information?. 11. contents 1 product profile . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1.1 general description . . . . . . . . . . . . . . . . . . . . . .1 1.2 features and benefits . . . . . . . . . . . . . . . . . . . . .1 1.3 applications . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1.4 quick reference data . . . . . . . . . . . . . . . . . . . . .1 2 pinning information . . . . . . . . . . . . . . . . . . . . . . .2 3 ordering information . . . . . . . . . . . . . . . . . . . . . .2 4 limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . .3 5 thermal characteristics . . . . . . . . . . . . . . . . . . .5 6 characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . .6 7 package outline . . . . . . . . . . . . . . . . . . . . . . . . . .9 8 revision history . . . . . . . . . . . . . . . . . . . . . . . . .10 9 legal information. . . . . . . . . . . . . . . . . . . . . . . . 11 9.1 data sheet status . . . . . . . . . . . . . . . . . . . . . . . 11 9.2 definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 9.3 disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 9.4 trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . .12 10 contact information. . . . . . . . . . . . . . . . . . . . . .12

▲Up To Search▲

Price & Availability of ACT108-600E

	To Download ACT108-600E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .