published date : feb 29,2008 drawing no : sdsa6492 v1 checked : shin chi p.1/4 14.22mm (0.56?) dual digit numeric display part number: DBBA14A2 www.sunled.com features 0.56 inch digit height. low current operation. excellent character appearance. easy mounting on p.c. boards or sockets. two digit package simplifies alignments & assembly. i.c. compatible. mechanically rugged. standard: gray face, white segment. rohs compliant. part number emitting color emitting material luminous intensity (if=10ma) ucd wavelength nm p description min. typ. DBBA14A2 blue ingan 8000 17990 468 common anode.rt. hand decimal absolute maximum ratings (t a =25c ) bba (ingan) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 100 ma power dissipation p t 120 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 electrostatic discharge threshold (hbm) 1000 v lead solder temperature [2mm below package base] 260c for 3 ?5seconds bba (ingan) unit forward voltage (typ.) (i f =10ma) v f 3.05 v forward voltage (max.) (i f =10ma) v f 4.0 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emis- sion (typ.) (i f =10ma) p 468 nm wavelength of dominant emission (typ.) (i f =10ma) d 470 nm spectral line full width at half-maximum (typ.) (i f =10ma) ? 21 nm capacitance (typ.) (v f =0v, f=1mhz) c 100 pf operating characteristics (ta=25c ) attention observe precautions for handling electrostatic discharge sensitive devices preliminary spec notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0. 01") unless otherwise noted. 3.specifications are subject to change without notice.
published date : feb 29,2008 drawing no : sdsa6492 v1 checked : shin chi p.2/4 14.22mm (0.56?) dual digit numeric display part number: DBBA14A2 www.sunled.com ? bba
published date : feb 29,2008 drawing no : sdsa6492 v1 checked : shin chi p.3/4 14.22mm (0.56?) dual digit numeric display part number: DBBA14A2 www.sunled.com remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : feb 29,2008 drawing no : sdsa6492 v1 checked : shin chi p.4/4 14.22mm (0.56?) dual digit numeric display part number: DBBA14A2 www.sunled.com packing & label specifications DBBA14A2
|