data brief for further information contact your local stmicroelectronics sales office. february 2010 doc id 17015 rev 1 1/6 6 STEVAL-PCC011V1 st802rt1b ethernet phy demonstration board features st802rt1b fast ethernet physical layer transceiver on-board 3.3 v ldo regulator on-board 25 mhz crystal 12 jumpers for boot-strap configuration (mii address, auto-negotiation, loopback, power down, mii/rmii configuration) gnd test points and jumpers for power consumption measurement connectors: ? 20-pin full pitch header connector for debugging (compatible with stm32f107 controller board) ? 40-pin connector compatible with the spirent communications smartbits 200/2000 (smb-200/ smb-2000) analysis system ? optical transceiver connector rohs compliant description the STEVAL-PCC011V1 demonstration board is designed as an evaluation platform for the st802rt1b, fast ethernet physical layer (phy) interface suppor ting 100base-fx applications. the phy provides a media independent interface (mii) and reduced media independent interface (rmii) for easy attachment to 10/100 media access controllers (mac). many jumpers, test points and connectors on the demonstration board allow testing of the features provided by the st802rt1b ethernet phy. an additional header connector allows connection to the stm32f107 controller demonstration board (not included with the STEVAL-PCC011V1), providing the capability for quick evaluation of the complete application ? microcontroller and the physical layer. the controller board is pre-flashed with a web server demonstration. the stm32f107 controller demonstration board is available separately through order code steval-pcc010v1. STEVAL-PCC011V1 www.st.com
schematic diagrams STEVAL-PCC011V1 2/6 doc id 17015 rev 1 1 schematic diagrams figure 1. st802rt1 fx mode ethernet phy demonstration board schematic - part 1 4 8 ? # , + , 0 " + ? % . 4 8 ? % . ' . $ ! 6 # # ! 4 8 $ 4 8 $ 4 8 $ 3 # , + 4 8 $ - ) ) ? # & |