1/8 september 2001 n propagation delay time t pd = 40ns (typ.) at v dd = 10v c l = 50pf n high to low level logic conversion n multiplexer: 1 to 6 or 6 to 1 n high osinko and osourceo current capability n quiescent current specified up to 20v n 5v, 10v and 15v parametric ratings n input leakage current i i = 100na (max) at v dd = 18v t a =25 c n 100% tested for quiescent current n meets all requirements of jedec jesd13b o standard specifications for description of b series cmos deviceso description the hcf4009ub is a monolithic integrated circuit fabricated in metal oxide semiconductor technology available in dip and sop packages. it is an inverting hex buffer/converter and can be used as cmos to ttl logic level converter as current osinko or osourceo driver or as multiplexer (1 to 6). it is a preferred replacement of hcf4049ub in buffer applications. hcf4009ub hex buffer/converter (inverting) pin connection order codes package tube t & r dip hcf4009ubey sop HCF4009UBM1 hcf4009um013tr dip sop
hcf4009ub 2/8 input equivalent circuit pin description truth table absolute maximum ratings absolute maximum ratings are those values beyond which damage to the device may occur. functional operation under these conditions is not implied. all voltage values are referred to v ss pin voltage. recommended operating conditions pin no symbol name and function 3, 5, 7, 9, 11, 14 a, b, c, d, e, f data inputs 2, 4, 6, 10, 12, 15 g, h, i, j, k, l data outputs 13 nc not connected 1 v cc positive supply voltage 8 v ss negative supply voltage 16 v dd positive supply voltage inputs outputs a, b, c, d,e, f g, h, i, j, k, l lh hl symbol parameter value unit v dd supply voltage -0.5 to +22 v v i dc input voltage -0.5 to v dd + 0.5 v i i dc input current 10 ma p d power dissipation per package 200 mw power dissipation per output transistor 100 mw t op operating temperature -55 to +125 c t stg storage temperature -65 to +150 c symbol parameter value unit v dd supply voltage 3to20 v v i input voltage 0 to v dd v t op operating temperature -55 to 125 c
hcf4009ub 3/8 dc specifications the noise margin for both o1o and o0o level is: 1v min. with v dd =5v, 2v min. with v dd =10v, 2.5v min. with v dd =15v symbol parameter test condition value unit v i (v) v o (v) |i o | ( m a) v dd = v cc (v) t a =25 c -40 to 85 c -55 to 125 c min. typ. max. min. max. min. max. i l quiescent current 0/5 5 0.02 1 30 30 m a 0/10 10 0.02 2 60 60 0/15 15 0.02 4 120 120 0/20 20 0.04 20 600 600 v oh high level output voltage 0/5 <1 5 4.95 4.95 4.95 v 0/10 <1 10 9.95 9.95 9.95 0/15 <1 15 14.95 14.95 14.95 v ol low level output voltage 5/0 <1 5 0.05 0.05 0.05 v 10/0 <1 10 0.05 0.05 0.05 15/0 <1 15 0.05 0.05 0.05 v ih high level input voltage 0.5/4.5 <1 5 4 4 4 v 1/9 <1 10 8 8 8 1.5/13.5 <1 15 12.5 12.5 12.5 v il low level input voltage 4.5/0.5 <1 5 1 1 1 v 9/1 <1 10 2 2 2 13.5/1.5 <1 15 2.5 2.5 2.5 i oh output drive current 0/5 2.5 <1 5 -0.8 -1.6 -0.65 -0.65 ma 0/5 4.6 <1 5 -0.2 -0.4 -0.18 -0.18 0/10 9.5 <1 10 -0.45 -0.9 -0.38 -0.38 0/15 13.5 <1 15 -1.5 -3 -1.25 -1.25 i ol output sink current 0/5 0.4 <1 5 3 4 2.4 2.4 ma 0/10 0.5 <1 10 8 10 6.4 6.4 0/15 1.5 <1 15 24 36 19 19 i i input leakage current 0/18 any input 18 10 -5 0.1 1 1 m a c i input capacitance any input 15 22.6 pf
hcf4009ub 4/8 dynamic electrical characteristics (t amb =25 c, c l = 50pf, r l = 200k w ,t r =t f = 20 ns) (*) typical temperature coefficient for all v dd value is 0.3 %/ c. test circuit c l = 50pf or equivalent (includes jig and probe capacitance) r l = 200k w r t =z out of pulse generator (typically 50 w ) symbol parameter test condition value (*) unit v dd (v) v i (v) v cc (v) min. typ. max. t tlh output transition time 5 5 5 150 350 ns 10 10 10 75 15 15 15 15 55 110 t thl output transition time 5 5 5 35 70 ns 10 10 10 20 40 15 15 15 15 30 t plh propagation delay time 5 5 5 70 140 ns 10 10 10 40 80 10 10 5 35 70 15 15 15 30 60 15 15 5 30 60 t phl propagation delay time 5 5 5 30 60 ns 10 10 10 20 40 10 10 5 15 30 15 15 15 15 30 15 15 5 10 20
hcf4009ub 5/8 waveform : propagation delay times (f=1mhz; 50% duty cycle)
hcf4009ub 6/8 dim. mm. inch min. typ max. min. typ. max. a1 0.51 0.020 b 0.77 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 d 20 0.787 e 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 f 7.1 0.280 i 5.1 0.201 l 3.3 0.130 z 1.27 0.050 plastic dip-16 (0.25) mechanical data p001c
hcf4009ub 7/8 dim. mm. inch min. typ max. min. typ. max. a 1.75 0.068 a1 0.1 0.2 0.003 0.007 a2 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 c 0.5 0.019 c1 45 (typ.) d 9.8 10 0.385 0.393 e 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 8.89 0.350 f 3.8 4.0 0.149 0.157 g 4.6 5.3 0.181 0.208 l 0.5 1.27 0.019 0.050 m 0.62 0.024 s8 (max.) so-16 mechanical data po13h
hcf4009ub 8/8 information furnished is believed to be accurate and reliable. however, stmicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringe ment of patents or other righ ts of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specifications mentioned in this pub lication are subject to change without notice. thi s pub lication supersedes and replaces all information previously supplied. stmicroelectronics prod ucts are not authori zed for use as critical components in life suppo rt devices or systems without express written approval of stmicroelectronics. ? the st logo is a registered trademark of stmicroelectronics ? 2001 stmicroelectronics - printed in italy - all rights reserved stmicroelectronics group of companies australia - brazil - china - finland - france - germany - hong kong - india - italy - japan - malaysia - malta - morocco singapore - spain - sweden - swit zerland - united kingdom ? http://w ww.st.com
|
