e-series surface mount mixer 2 - 500 mhz emrsl-1lh m/a-com, inc. north america: tel. (800) 366-2266 n asia/paci?: tel. +81 (03) 3226-1671 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +81 (03) 3226-1451 fax +44 (1344) 300 020 1 speci?ations subject to change without notice. v3.00 features lo power: +10 dbm up to +5 dbm rf speci?ations @ 25? frequency range rf 2 - 500 mhz lo 2 - 500 mhz if dc - 500 mhz conversion loss (db) typical maximum 4 - 250 mhz 5.7 7 2 - 500 mhz 6 8 isolation (db) typical minimum lo to rf 2 - 20 mhz 58 45 20 - 250 mhz 44 25 250 - 500 mhz 30 20 lo to if 2 - 20 mhz 55 40 20 - 250 mhz 40 25 250 - 500 mhz 28 17 operating characteristics impedance 50 ohms nominal rf input for 1db compression +5 dbm dc polarity negative ordering information part no. packaging emrsl-1lh tubes EMRSL-1LHTR forward tape & reel absolute maximum ratings sm-24 pin con?uration function pin no. lo 1 rf 4 if* 5 ground 2, 3, 6 l l s 0628 b dimensions in ( ) are in mm. unless otherwise noted: .x = ?.04 (1.00) .xx = ?.02 (0.50) .xxx = ?.010 (0.250) parameter absolute maximum rf power 50 mw peak if current 40 ma storage temperature -55? to 100? operating temperature -55? to 100? pin temperature (10 seconds) 260? *if pins must be connected together externally.
|
