www .sunled.com part number: XZZY45W-2 published date : may 16,2005 drawing no : xdsa7428 v2 checked : b.l.liu p.1/3 3.5x2.8 mm smd chip led lamp part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. XZZY45W-2 yellow ingaalp water clear 280 597 590 40 absolute maximum ratings (t a =25c ) ) ) ) zy (ingaalp) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 140 ma power dissipation p t 120 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 zy (ingaalp) unit forward voltage (typ.) (i f =20ma) v f 2.3 v forward voltage (max.) (i f =20ma) v f 2.8 v reverse current (v r =5v) i r 10 ua wavelength of peak emission (i f =20ma) p 590 nm wavelength of dominant emission (i f =20ma) d 589 nm spectral line full width at half-maximum (i f =20ma) ? 20 nm capacitance (v f =0v, f=1mhz) c 45 pf operating characteristics (t a =25c ) ) ) ) notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. features single color. suitable for all smt assembly and solder process. ideal for backlighting. available on tape and reel. package : 500pcs / reel. rohs compliant.
www .sunled.com part number: XZZY45W-2 published date : may 16,2005 drawing no : xdsa7428 v2 checked : b.l.liu p.2/3 3.5x2.8 mm smd chip led lamp zy
www .sunled.com part number: XZZY45W-2 published date : may 16,2005 drawing no : xdsa7428 v2 checked : b.l.liu p.3/3 3.5x2.8 mm smd chip led lamp recommended soldering pattern (units : mm; tolerance: 0.1) tape specification (units : mm) remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
|