502 via del monte, oceanside, ca 92054 tel: 760.433.4510 fax: 760.434.0255 monitor products company inc reserves the right to make changes to its products and product specifications without notice. no liability is assumed as a result of their use or application. 07-02-01 designing and manufacturing innovative frequency control devices since 1927 miniature quartz crystals mm80 m sm80 environmental performance specifications operating temp range -20 1 c to 70 1 c standard storage temp range -55 1 c to 105 1 c humidity 85% rh, 85 1 c, 48 hours hermetic seal leak rate 2 x 10 -8 atm-cm 3 /sec max solderability mil-std-202f method 208e vibration mil-std-202f method 204 / 35g, 50~2000 hz (<25.0 mhz) / 20g, 50~2000 hz (25.0 mhz) shock mil-std-202f method 213b test cond e, 1000g, 1/2 sine wave mil-0-55310 exceeds environmental and electrical specifications of equivalent mil-0-55310 packaging 24mm tape & reel (1000pcs/reel standard, or bulk <1000pcs) sm80 mm80 electrical specifications frequency range 3.579545 mhz ~ 200.0 mhz* operating temp range -20 1 c ~ 70 1 c storage temp range -55 1 c ~ 105 1 c calibration tolerance ! 50ppm @ 25 1 c drive level 100.0 ? w max shunt capacitance 7.0 pf frequency tolerance ! 50ppm from -20 1 c ~ 70 1 c vs temp range equivalent series 6.0 ~ 8.0 = 120 32.0 ~ 80.0 = 70 (3rd ot) resistance** 8.1 ~ 12.0 = 80 81.0 ~ 160.0 = 100 (5th ot) (mhz = ? max) 12.1 ~ 25.0 = 40 161.0 ~ 180.0 = 140 (7th ot) 181.0 ~ 200.0 = 160 (9th ot) * call for your specific frequency requirement fundamental unless otherwise indicated applications m wireless rf m pcmcia m cameras m pdas m disk drives monitor products? mm80 (thru-hole) and sm80 (surface mount) provide ultra-miniature crystals in highly reliable, resistance-welded packages. units=mm units=mm
502 via del monte, oceanside, ca 92054 tel: 760.433.4510 fax: 760.434.0255 monitor products company inc reserves the right to make changes to its products and product specifications without notice. no liability is assumed as a result of their use or application. 07-02-01 mm80 m sm80 part numbering key mm80n1c3a = @ 14.31818mhz sm80s3c3e = @ 46.0mhz sample part numbers n s 3 c e 46.0 1 c a l = 12 pf m = 15 pf n = 20 pf o = 32 pf q = 24 pf s = series resonant x = cust spec correlation packaging mode a = 2 lead e = tape & reel (1000 pcs/reel - sm80 only - x = cust spec frequency stability c = ! 50 ppm* x = cust spec 3 3 temp range 3 = - 20 1 c~70 1 c* 9 = cust spec mm80 sm80 series mm80 (thru-hole) sm80 (smd) 1 = fundamental* 3 = 3rd overtone 5 = 5th overtone 7 = 7th overtone 14.318 frequency * standard call factory for additional options. use full descriptive part number when ordering. parts will be marked with se ries and frequency only. tape dimensions (sm80 only) reel dimensions (sm80 only) 24mm tape 1000 pcs / reel units = mm anti-resonance parallel: crystals operating at anti-resonance will look inductive in the circuit. changes of reactive values in the circuit will change the crystal frequency. if the crystal is to be used at anti-resonance, the load capacitance should always be specified. the load capacitance c l is the dynamic capacitance of the total circuit as measured across the crystal terminals. series resonance: at series resonance, the crystal looks resistive in the circuit, and correlation of frequency is not a problem. it must be specified if unit is to be manufactured at series or at a particular load capacitance. crystal correlation theory monitor products has a proven track record as a pioneer manufacturer in the frequency control market. if our extensive selectio n of standard and engineered crystals and oscillators does not meet your spec, we will work with you towards a customized solution.
|
