mas-con 26 press-in header in press-in technique features of the press-in technique ? gas tight connection, resistant for gas, corrosion and vibration ? low contact resistance ? no thermal load on pcis ? visible wiring ? part loaded possible ? no ?ry?joints insertion and retention forces ?for various drill sizes (forces initially in board of 1,6 ?,2 mm thickness) minimum ( 0,94 mm) maximum ( 1,09 mm) ? contact design of compliant pin: eye-of-the-needle ? two beams for unidirectional flexing ? male connections with right angle and straight pins ? termination tools p.c.b thickness a 1,6 ?3,2 mm drill size b 1,15 + 0,03 mm finished hole size c 0,94 ?1,09 mm complete d 1,65 mm copper 25 ?76? tin-lead 5 ?15 ? min. press-fit technique itwcatalog3rded_f.qxp 8/1/07 1:15 pm page 24
mas-con 27 series mf/ml/mp 100 press-in mfsp100... straight mfap100... 2) angled mpsp100... straight polarizing and locking mpap100... angled polarizing and locking mlsp100... straight with locking and tab polarization contact factory for availability mlap100... angled locking and tab polarizing dimensions 2.54 mm headers with locking and polarizing available in 2 to 36 circuits 5,08 7,62 10,16 12,70 15a,24 17,78 20,32 22,86 25,40 27,94 30,48 33,02 35,56 38,10 40,64 43,18 45,72 48,26 50,80 53,34 55,88 58,42 60,96 63,50 66,04 68,58 71,12 73,66 76,20 78,74 81,28 83,82 86,83 88,90 91,44 a 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 a a b b part number no. of circuits 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36 2 to 12 and 14 circuits, not breakable all other circuits breakable a b straight straight polarizing angled angled polarizing straight locking and tab polarizing angles locking and tab polarizing description mfsp100- mlsp100- mpsp100- mfap100- mlap100- mpap100- rohs compliant not breakable breakable itwcatalog3rded_f.qxp 8/1/07 1:15 pm page 25
|