voltage/current design max vf/if vf/if v/c table i 5v/22ma 5.5v/28ma 12v/20ma 14v/25ma 15v/24ma 16.5v/28ma 24v/17ma 26v/20ma 28v/16.5ma 30v/18ma 48v/15ma 50v/16ma 60v/9ma 65v/10ma 120vac/3.5ma 130vac/4ma .230" panel mount reflector t-1, water-tight optional 445 s. douglas street, el segundo, ca 90245-4630 ?(800) 421-6815 ?(310) 640-0442 ?fax (310) 640-7639 w ww.datadisplay.com ?20 05 data display products 54 - reflective chrome-plated body - mounting hardware provided - maximum panel thickness .125"(pmrl125); .070"(pmrl125, water-tight) - for detailed led data, see discrete section, model 125 data display products ? specialty leds - diffused encapsulation st andard intensity - diffused encapsulation to order, follow the example: voltage [3] 2 5h 12h15h 24h 28h 48h 60h 120 [4] water model wire led voltage tight pmrl125 w -bcg 12h led -rlp [6] -alp [6] -glp [6] -rg color red amb grn red/grn v iewing angle 50 5050 72 v/c t able [2] [2] [2][2] i description low power low powerlow power bi-color, red cathode led -br -ba-bg color red amb grn v iewing angle 60 6060 v/c t able [2] i ii iv [1] (mcd) 14 1414 pk (nm) 635 583565 2 medium intensity - tinted encapsula tion led -bcr -bca-bcg color red amb grn viewing angle 45 4545 v/c table [2] i ii iv [1] (mcd) 60 3044 pk (nm) 635 583565 high intensity - waterclear encapsulation led -nwr -nwa -nwg -nwb -nww color red amb grn blu wht viewing angle 35 3545 45 55 v/c table [2] i i iiii ii iv [1] (mcd) 2180 21802000 600 1100 pk (nm) 634 592520 465 voltage/current design max vf/if vf/if v/c table ii 5v/15ma 5.5v/23ma 12v/15ma 14v/20ma 15v/15ma 16.5v/18ma 24v/15ma 26v/18ma 28v/15ma 30v/17ma 48v/9.5ma 50v/10ma 60v/7ma 65v/8ma 120vac/3.5ma 130vac/4ma iv [1] (mcd) 2.1 1.62.1 5.0/5.0 pk (nm) 635 583565 630/565 3 123 select one bold component from each numbered category in the tables below. part number pmrl125w-bcg12h model wires pmrl125 w (optional) 1 water tight [5] -wt (optional) 4 4 [1] iv = typical luminous intensity @ if = 20ma(ta =25). for low power leds, if = 2ma. [2] see voltage/current table for design specifications. design current for low power leds = 2ma. [3] ta = 25. votalge "2" indicates external resistor required. voltages 5h through 60h are vdc. for ac operation, insert d after voltage (e.g. 24hd). d indicates built-in rectifier, not required for 5h or 120v ac . dc operation not available for 120vac. bi-color not available in ac voltages. [4] select high intensity leds only. [5] drip-proof (not submersible), supplied with two neoprene gaskets. [6] omit h when selecting a voltage (e.g. pmrl125-rlp12).
445 s . douglas street, el segundo, ca 90245-4630 ?(800) 421-6815 ?(310) 640-0442 ?fax (310) 640-7639 www.datadisplay.com ?2005 data display products 55 .230" panel mount reflector t-1, water-tight optional data display products ? pmrl125 standard wire leads: 6.0" total length(nominal)/.50" stripped (nominal), r ed anode/black cathode, 24 awg tpb ul1061 insulation. contact factory for other lengths, gauges and colors. all dimensions are in inches (mm) tolerances: .xx"(.x) ?025"(.63) / .xxx"(.xx)?010"(.25) specifications are subject to change without notice.
|
